Monte Carlo simulation of mixing in Ca3Fe2Ge3O12–Ca4Ge4O12 garnets and implications for the thermodynamic stability of pyrope–majorite solid solution

Static lattice energy calculations, based on empirical pair potentials, were performed for a large set of structures differing in the arrangement of octahedral cations within the garnet 2 × 2 × 2 supercell. The compositions of these structures varied between Ca₃Fe₂Ge₃O₁₂ and Ca₄Ge₄O₁₂. The energies were cluster expanded using pair and quaternary terms. The derived ordering constants were used to constrain Monte Carlo simulations of temperature-dependent mixing properties in the ranges of 1,073–3,673 K and 0–10 GPa. The free energies of mixing were calculated using the method of thermodynamic integration. The calculations predict a wide miscibility gap between Fe-rich (cubic) and Fe-pure (tetragonal) garnets consistent with recent experimental observations of Iezzi et al. (Phys Chem Miner 32:197–207, 2005). It is shown that the miscibility gap arises due to a very strong cation ordering at the Fe-pure composition, driven by the charge difference between Ca²⁺ and Ge⁴⁺ cations. The structural and thermodynamic analogies between Ca–Ge and Mg–Si systems suggest that a similar miscibility gap should exist between pyrope and Mg–Si-majorite.     

Organic pollutants associated with macromolecular soil organic matter: Mode of binding

A study of ether-linked moieties in macromolecular bound residues of polycyclic aromatic hydrocarbons (PAH) generated in bioremediation experiments was performed using high temperature hydrolysis degradation with subsequent analysis of the products by GC-MS. This hydrolysis reaction was specifically designed to cleave ether bonds including relatively stable diarylether structures. Among the reaction products, aromatic alcohols representing typical microbiologically derived metabolites of PAH were found in addition to natural compounds. Thus, parts of the bound residues appeared to be linked within the macromolecular material by ether bonds. Model experiments with an oxidoreductase enzyme and aromatic alcohols indicate the formation of these ether bonds to be an enzyme-catalysed process.     

Eocene-Pliocene time scale and stratigraphy of the Upper Rhine Graben (URG) and the Swiss Molasse Basin (SMB)

We present a general stratigraphic synthesis for the Upper Rhine Graben (URG) and the Swiss Molasse Basin (SMB) from Eocene to Pliocene times. The stratigraphic data were compiled both from literature and from research carried out by the authors during the past 6 years ; an index of the stratigraphically most important localitites is provided. We distinguish 14 geographical areas from the Helvetic domain in the South to the Hanau Basin in the North. For each geographical area, we give a synthesis of the biostratigraphy, lithofacies, and chronostratigraphic ranges. The relationships between this stratigraphic record and the global sea-level changes are generally disturbed by the geodynamic (e.g., subsidence) evolution of the basins. However, global sea-level changes probably affected the dynamic of transgression–regression in the URG (e.g., Middle Pechelbronn Beds and Serie Grise corresponding with sea-level rise between Ru1/Ru2 and Ru2/Ru3 sequences, respectively) as well as in the Molasse basin (regression of the UMM corresponding with the sea-level drop at the Ch1 sequence). The URGENT-project (Upper Rhine Graben evolution and neotectonics) provided an unique opportunity to carry out and present this synthesis. Discussions with scientists addressing sedimentology, tectonics, geophysics and geochemistry permitted the comparison of the sedimentary history and stratigraphy of the basin with processes controlling its geodynamic evolution. Data presented here back up the palaeogeographic reconstructions presented in a companion paper by the same authors (see Berger et al. in Int J Earth Sci 2005).     

Defining the Potential of Nanoscale Re‐Os Isotope Systematics Using Atom Probe Microscopy

Atom probe microscopy (APM) is a relatively new in situ tool for measuring isotope fractions from nanoscale volumes (< 0.01 μm³). We calculate the theoretical detectable difference of an isotope ratio measurement result from APM using counting statistics of a hypothetical data set to be ± 4δ or 0.4% (2s). However, challenges associated with APM measurements (e.g., peak ranging, hydride formation and isobaric interferences), result in larger uncertainties if not properly accounted for. We evaluate these factors for Re‐Os isotope ratio measurements by comparing APM and negative thermal ionisation mass spectrometry (N‐TIMS) measurement results of pure Os, pure Re, and two synthetic Re‐Os‐bearing alloys from Schwander et al. (2015, Meteoritics and Planetary Science, 50, 893) [the original metal alloy (HSE) and alloys produced by heating HSE within silicate liquid (SYN)]. From this, we propose a current best practice for APM Re‐Os isotope ratio measurements. Using this refined approach, mean APM and N‐TIMS ¹⁸⁷Os/¹⁸⁹Os measurement results agree within 0.05% and 2s (pure Os), 0.6–2% and 2s (SYN) and 5–10% (HSE). The good agreement of N‐TIMS and APM ¹⁸⁷Os/¹⁸⁹Os measurements confirms that APM can extract robust isotope ratios. Therefore, this approach permits nanoscale isotope measurements of Os‐bearing alloys using the Re‐Os geochronometer that could not be measured by conventional measurement principles.     

Hazard assessment in rock cliffs at Central Algarve (Portugal): A tool for coastal management

Coastal hazards are in the interface of human activities with natural coastal processes. The conflicts arising from this relationship require new approaches suitable for coastal management that consider the dynamic of coastal areas. A method to assess hazard in rock cliffs is presented, combining cliff evolution forcing mechanisms along with protection factors, according to a weighted factors system. This method provides a rapid evaluation of vulnerability for cliffed areas, supporting coastal management and hazard mitigation. The method was applied to the rocky cliffs of the densely populated coastal zone between Galé and Olhos de Água (Southern Portugal), where high and very high hazard values were found to be dominant. A method validation was made using the vulnerability areas and the recorded mass movements over a 45 year period in the same area.     

Constraining Holocene 10Be production rates in Greenland

The absence of a production rate calibration experiment on Greenland has limited the ability to link ¹⁰Be exposure dating chronologies of ice‐margin change to independent records of rapid climate change. We use radiocarbon age control on Holocene glacial features near Jakobshavn Isbræ, western Greenland, to investigate ¹⁰Be production rates. The radiocarbon chronology is inconsistent with the ¹⁰Be age calculations based on the current globally averaged ¹⁰Be production rate calibration data set, but is consistent with the ¹⁰Be production rate calibration data set from north‐eastern North America, which includes a calibration site nearby on north‐eastern Baffin Island. Based on the best‐dated feature available from the Jakobshavn Isbræ forefield, we derive a ¹⁰Be production rate value of 3.98 ± 0.24 atoms g a^?1, using the ‘St’ scaling scheme, which overlaps with recently published reference ¹⁰Be production rates. We suggest that these ¹⁰Be production rate data, or the very similar data from north‐eastern North America, are used on Greenland. Copyright © 2011 John Wiley & Sons, Ltd.     

Fifteen days of continuous activity survey at Stromboli volcano, Italy, in late September 2000: Doppler radar, seismicity, infrared, soil humidity, and mapping of the crater region

The intention of our study was to gain new insight into the complex interplay between different types of eruption of the Stromboli volcano by combining detailed field observation with different geophysical methods. We recorded more than 600 eruptions by use of continuous Doppler radar measurements. We detected the onset of the seismic precursor and the beginning of the visible eruption by use of seismic and infrared data. Two soil samples per day were used to monitor the effect of humidity on the eruptive style. We mapped the crater region as a reference base for the long-term morphological changes of the active region and for the exact positions of our measurement systems. Two distinct types of eruption were distinguished from each other on the basis of seismic and radar data - short, wide-angle Strombolian explosions and pulsating, sharp angle fountain-like eruptions. Data and visual observations imply that weather conditions significantly effect volcanic activity. We also interpret the intensification of eruptive activity during our field study as replenishment of the reservoir with a new batch of magma in late September 2000.     

Detrital subsidy to the supratidal zone provides feeding habitat for intertidal crabs

Beach-cast wrack of marine origin is considered a spatial subsidy to the marine-terrestrial transition zone. We found that the wrack line on sand and gravel beaches of Vancouver Island was frequented by intertidal purple shore crabs,Hemigrapsus nudus (Dana 1851) and densely colonized by detritivorous talitrid amphipods. Amphipods spend the day buried in sand and forage on beach wrack during the night.H. nudus were found in supratidal wrack putches immediately after nightly high tides in field censuses, but spent most of the day and ebb tides either submerged subtidally or hidden underneath intertidal rocks and boulders. In feeding trials, intertidal shore crabs were capable of preying on talitrid amphipods. We considerH. nudus an omnivore feeding on both fresh and decaying macroalgae as well as animal prey. Although living supratidally, amphipods were significantly preferred over intertidal littorine snails by foraging shore crabs. Handling time of amphipods was significantly shorter than for littorine snails. While amphipods had a reduced risk of predation byH. nudus when buried in the sand, foraging undern eath wrack patches did not reduce predation pressure on amphipods by shore crabs. Rates of amphipod consumption by shore crabs were higher at darkness than daylight. In addition to an apparent day-night rhythm, tidal height and time elapsed since previous high tide had a significant influence on shore crab density wrack. We conclude that beach-cast wrack acts as a spatial subsidy by virtue of providing a valuable food source to talitrid amphipods, which are in turn consumed by shore crabs that ride the nightly high tide into supratidal wrack patches to reduce the risk of passing bare sand on theiry way to a feeding habitat rich in valuable prey.     

Atmospheric electrical measurements in the Hawaiian islands

Summary An exploration of the electrical properties of the atmosphere on and above the island of Hawaii, as indicated by a portable corona current unit, is described. A 30 foot telescopic mast having a radioactive probe mounted on an insulated bushing and connected by shielded cable to a sensitive microammeter was used. Corona currents were measured at a number of geographic locations ranging from sea level under conditions of heavy surf to the 10,000 foot level on Mauna Kea several thousand feet above the exchange layer, and over the land and ocean in a light plane. Observations were made under clear, cloudy and rainy conditions. Fair weather and cloudy conditions gave currents from air to earth of positive sign. With warm rain falling the currents had a negative sign and increased in value with intensity of precipitation. In several instances indications of incipient discharges similar to that observed in mild lightningstorms were noted.The island of Hawaii has many desirable features to recommend it for an extensive research program in atmospheric electricity. A simple and inexpensive approach to inaugurating such a program is suggested.