Stability of the periodic solutions of the restricted three-body problem representing analytic continuations of Keplerian rectilinear periodic motions

The periodic solutions of the restricted three-body problem representing analytic continuations of Keplerian rectilinear periodic motions are well known (Kurcheeva, 1973). Here the stability of these solutions are examined by applying Poncaré's characteristic equation for periodic solutions. It is found that the isoperiodic solutions are stable and all other solutions are unstable.     

National ocean policy—new opportunities for Malaysian ocean development

Being a littoral state, Malaysian maritime sectors provide the basis for the growth and development of marine-related activities. As the country enters the new millennium along with the ‘2020 Vision’ which serves as the basic template against which the economic performance of these sectors should be judged, it poses a new challenge for Malaysia in developing these sectors. This paper attempts to address three basic issues: Firstly, is there any national ocean policy in place? Secondly, are the maritime sectors adequately organized to play an important role in achieving the objectives? Thirdly, what are the opportunities available in developing the ocean?It can be seen that existing policies to develop comprehensive ocean governance have not received the full attention they deserve. Organizational structures governing the ocean for implementing national policies are well in place but in a fragmented and uncoordinated fashion. As a result, sectoral and intersectoral management problems were created such as multiple-use conflicts, overlapping of jurisdiction and duplication of efforts. Environmental problems have also not been properly addressed. A few sectors have been identified as offering opportunities to further develop the Malaysian maritime areas. Among these are marine education and human resources development, marine tourism and the seafood industry.     

Treatment of Hydrodynamic Loading for Random Sea State

- In order to employ cost effective frequency domain analysis for off-shore structures treatment of hydrodynamic loading is essential. Drag and inertia dominated, resonating and antiresonating cases under random sea states are analyzed to highlight the implications and relative merits of four salient linearization techniques.     

Design of efficient base isolation for hammers and presses

Foundations supporting hammers and presses have to withstand powerful short-period impact loads. When designing these foundations, their vibration amplitudes and the forces transmitted to the supporting piles or soil medium must be reduced to meet serviceability and stability requirements. Mounting systems are often used to achieve this goal. The objectives of this paper are to investigate the efficiency of mounting systems for different foundation configurations and to provide practical guidance for their design. A comprehensive parametric study was conducted and the results were used to establish a set of charts for the design of efficient mounting systems.     

Evaluation of the fishery status for King Soldier Bream Argyrops spinifer in Pakistan using the software CEDA and ASPIC

Catch and effort data were analyzed to estimate the maximum sustainable yield(MSY) of King Soldier Bream, Argyrops spinifer(Forssk?l, 1775, Family: Sparidae), and to evaluate the present status of the fish stocks exploited in Pakistani waters. The catch and effort data for the 25-years period 1985–2009 were analyzed using two computer software packages, CEDA(catch and effort data analysis) and ASPIC(a surplus production model incorporating covariates). The maximum catch of 3 458 t was observed in 1988 and the minimum catch of 1 324 t in 2005, while the average annual catch of A. spinifer over the 25 years was 2 500 t. The surplus production models of Fox, Schaefer, and Pella Tomlinson under three error assumptions of normal, log-normal and gamma are in the CEDA package and the two surplus models of Fox and logistic are in the ASPIC package. In CEDA, the MSY was estimated by applying the initial proportion(IP) of 0.8, because the starting catch was approximately 80% of the maximum catch. Except for gamma, because gamma showed maximization failures, the estimated results of MSY using CEDA with the Fox surplus production model and two error assumptions, were 1 692.08 t(R 2 =0.572) and 1 694.09 t( R 2 =0.606), respectively, and from the Schaefer and the Pella Tomlinson models with two error assumptions were 2 390.95 t( R 2 =0.563), and 2 380.06 t( R 2 =0.605), respectively. The MSY estimated by the Fox model was conservatively compared to the Schaefer and Pella Tomlinson models. The MSY values from Schaefer and Pella Tomlinson models were the same. The computed values of MSY using the ASPIC computer software program with the two surplus production models of Fox and logistic were 1 498 t(R 2 =0.917), and 2 488 t( R 2 =0.897) respectively. The estimated values of MSY using CEDA were about 1 700–2 400 t and the values from ASPIC were 1 500–2 500 t. The estimates output by the CEDA and the ASPIC packages indicate that the stock is overfished, and needs some effective management to reduce the fishing effort of the species in Pakistani waters.     

Integrated petrographic,mineralogical, and geochemical study of the upper Kaimur Group of rocks,Son Valley,India: Implications for provenance,source area weathering and tectonic setting

The upper Kaimur Group (UKG) of the Vindhyan Supergroup in central India, primarily consists of three rock types-Dhandraul sandstone, Scarp sandstone and Bijaigarh shale. The present study aims to reconstruct the parent rock assemblages, their tectonic provenance, mineralogy, weathering intensity, hydraulic sorting and depositional tectonic setting. Samples from the UKG rocks representing the Dhandraul sandstone, Scarp sandstone and Bijaigarh shale were studied using a combination of petrographic, mineralogical, and geochemical techniques. Texturally, medium to coarse grained UKG sandstones are mature and moderate to well sorted. Deficiency of feldspars in these sandstones indicates that the rocks are extensively recycled from distant sources. Their average modal composition for Scarp (avg. Qt₉₉ F₀.₂L_0.8) and Dhandraul (avg. Qt₉₉ F_0.1L_0.8) sandstones, classifies them as quartz arenite to sub-litharenite types, which is consistent with geochemical study. Major element concentrations revealed that sandstones have high SiO₂, K₂O < Na₂O, and low Fe₂O₃, which are supported by the modal data. On the other hand, sandstone samples are enriched in most trace elements such as Ce, Sr, V, Sc and Zr and depleted in U and Th. The CIA values (43.17–76.48) of the UKG rocks indicate low to moderate weathering, either of the original source or during transport before deposition, which may have related to low-relief and humid climatic conditions in the source area. Further, petrographic and geochemical interpretations indicate that they are derived from craton interior to quartzose recycled sedimentary rocks and deposited in a passive continental margin. Therefore, granitic and low grade metamorphic rocks of Mahakoshal Group and Chotanagpur granite-gneiss, situated on the southern and south-eastern side of the Vindhyan basin are suggested as possible provenance for the UKG rocks.     

Leaching capabilities of iodine monochloride (ICl) and diethylenetriamine pentaacetic acid (DPTA) at different concentrations and pH for some major and trace metals from coal and coal fly ash

In the present study, coal from Chakwal (Pakistan) was leached with an aqueous solutions of iodine monochloride (ICl) and diethylenetriamine pentaacetic acid (DPTA) of different concentrations. The effect of stirring time, concentration and pH was studied on the leaching of different metals from coal. The physicochemical parameters indicated that the coal was of reasonably good quality. The results indicated that with increase in time duration, the extraction of metals increased. In most of the cases, metal concentration increased in the leachate with increasing the concentration of the leaching agents. DPTA was found to be the best leaching agent for most of the metals. Higher extraction of metals from coal fly ash indicated that coal organic matter has a pronounced effect on the leaching. Higher concentration of metals was extracted from virgin coal and coal fly ash at low pH (p?>?0.00) as compared to high pH. DPTA extracted metals in higher concentration from virgin coal and coal fly ash at low pH as compared to ICl. Based on the present study, the most leached metals were Fe, Cu, Mn and the least were Pb, Ni, Cd and Cr.     

Coupled ‘storm‐flood’ depositional model: Application to the Miocene–Modern Baram Delta Province,north‐west Borneo

The Miocene to Modern Baram Delta Province is a highly efficient source to sink system that has accumulated 9 to 12 km of coastal–deltaic to shelf sediments over the past 15 Myr. Facies analysis based on ca 1 km of total vertical outcrop stratigraphy, combined with subsurface geology and sedimentary processes in the present‐day Baram Delta Province, suggests a ‘storm‐flood’ depositional model comprising two distinct periods: (i) fair‐weather periods are dominated by alongshore sediment reworking and coastal sand accumulation; and (ii) monsoon‐driven storm periods are characterized by increased wave‐energy and offshore‐directed downwelling storm flow that occur simultaneously with peak fluvial discharge caused by storm precipitation (‘storm‐floods’). The modern equivalent environment has the following characteristics: (i) humid‐tropical monsoonal climate; (ii) narrow (ca <100 km) and steep (ca 1°), densely vegetated, coastal plain; (iii) deep tropical weathering of a mudstone‐dominated hinterland; (iv) multiple independent, small to moderate‐sized (10² to 10⁵ km²) drainage basins; (v) predominance of river‐mouth bypassing; and (vi) supply‐dominated shelf. The ancient, proximal part of this system (the onshore Belait Formation) is dominated by strongly cyclical sandier‐upward successions (metre to decametre‐scale) comprising (from bottom to top): (i) finely laminated mudstone with millimetre‐scale silty laminae; (ii) heterolithic sandstone–mudstone alternations (centimetre to metre‐scale); and (iii) sharp‐based, swaley cross‐stratified sandstone beds and bedsets (metre to decimetre‐scale). Gutter casts (decimetre to metre‐scale) are widespread, they are filled with swaley cross‐stratified sandstone and their long axes are oriented perpendicular to the palaeo‐shoreline. The gutter casts and other associated waning‐flow event beds suggest that erosion and deposition was controlled by high‐energy, offshore‐directed, oscillatory‐dominated, sediment‐laden combined flows within a shoreface to delta front setting. The presence of multiple river mouths and exceptionally high rates of accommodation creation (characteristic of the Neogene to Recent Baram Delta Province; up to 3000 m Ma⁻¹), in a ‘storm‐flood’‐dominated environment, resulted in a highly efficient and effective offshore‐directed sediment transport system.     

Reflectance spectroscopy and remote sensing data for finding sulfide-bearing alteration zones and mapping geology in Gilgit-Baltistan,Pakistan

Gilgit-Baltistan region is covering the northern most part of Pakistan where the rocks of the Kohistan-Ladakh island arc and Karakoram plate are exposed. The area has greater potential for precious and base metals deposits which are needed to be explored through spectroscopy and remote sensing techniques. Minerals and rocks can nowadays be identified through the measurement of their absorption and reflectance features by spectroscopic analysis. Spectral reflectance analysis is also very important in selecting the appropriate spectral bands for remote-sensing data analysis of unknown or inaccessible areas. In this study, reflectance spectra in the spectral range of 0.35–2.5 μm of different types of unaltered and altered rocks found in the Machulu and Astor areas of northern Pakistan were obtained using an ASD spectroradiometer. The fresh rock samples showed low spectral reflectance as compared to the altered rock samples. The minerals jarosite, goethite, and hematite showed depth of absorption minima in the range of 0.4–1.15 μm due to the presence of iron (Fe), while jarosite and limonite showed absorption depth at 2.2 μm due to the presence of hydroxyl ions (OH^¯). The clay minerals montmorillonite and illite showed absorption depth at 1.93 and 2.1 μm, respectively. Muscovite showed depth of absorption minima at 1.4 and 1.9 μm in some samples. Calcite showed deep absorption minima at 2.32 μm, while anorthite showed absorption features at 1.4, 1.9, 2.24, and 2.33 μm. Olivine showed a slight depressed absorption feature at 1.07 μm. The copper-bearing phases malachite, chrysocolla, and azurite showed, respectively, a broad absorption feature in the range of 0.6–0.9 μm, a small absorption at 1.4 μm, and a deep absorption at 1.93 μm. The unmineralized samples exhibited high reflectance in the wavelength ranges of 0.6–0.8, 1.6–1.9, 2.0–2.3, 2.1–2.25, and 2.4–2.5 μm, respectively, while the mineralized samples showed reflectance bands in the wavelength ranges of 0.4–0.6, 1.3–1.8, and 2.1–2.2 μm. On this basis, the band ratio combinations 7/5–4/3–6/3 and 7/5–6/3–4/3 of Landsat 8 and 4/7–4/3–2/1 for ASTER data were found to be very effective in the lithological differentiation of major rock units.     

Household vulnerability and resilience in flood hazards from disaster-prone areas of Punjab,Pakistan

Natural Hazards - An environmental variation has caused Pakistan an alarming portrait of vulnerability in flood disasters. The government has focused on a number of realistic actions, heartening...