Numerical manifold method for dynamic nonlinear analysis of saturated porous media

It is well known that the Babuska–Brezzi stability criterion or the Zienkiewicz–Taylor patch test precludes the use of the finite elements with the same low order of interpolation for displacement and pore pressure in the nearly incompressible and undrained cases, unless some stabilization techniques are introduced for dynamic analysis of saturated porous medium where coupling occurs between the displacement of solid skeleton and pore pressure. The numerical manifold method (NMM), where the interpolation of displacement and pressure can be determined independently in an element for the solution of u–p formulation, is derived based on triangular mesh for the requirement of high accurate calculations from practical applications in the dynamic analysis of saturated porous materials. The matrices of equilibrium equations for the second‐order displacement and the first‐order pressure manifold method are given in detail for program coding. By close comparison with widely used finite element method, the NMM presents good stability for the coupling problems, particularly in the nearly incompressible and undrained cases. Numerical examples are given to illustrate the validity and stability of the manifold element developed. Copyright © 2006 John Wiley & Sons, Ltd.     

CPLD技术及其在现代时统中的应用

对CPLD(复杂可编程逻辑器件)技术的基本特征和发展趋势作了简要介绍,揭示了该技术在现代数字系统中的重要地位及作用.利用CPLD对时统设备IRIG-B码产生器进行集成,其实验结果表明,集成了的B码产生器不但简单、可靠,而且便于调试,克服了以往硬件电路复杂的缺点.     

CCD联合平差方法及其初步实例检验

在常规照相天体测量工作中 ,对暗天体的定位是采用逐级定标星过渡的方法实现的。由于星表系统差和局部差的存在 ,最终定位结果可能包含难以把握的误差积累。在CCD小视场观测情况下时常难以找到足够数量的定标星。鉴于此 ,推导了CCD观测联合平差方法的严格矢量表达式 ,以期通过共同星的过渡 ,实现大天区统一平差。原理上此方法可实现相对于河外天体的定位 ,以削弱星表系统差和局部差对定位结果的影响。讨论了CCD联合平差方法实现中的问题 ,包括底片常数模型选择、切点位置改正、共同星的较差改正和法方程解算方法等 ,并分析了具体的处理措施。用实例初步检验了CCD联合平差方法的效果 ,表明通过对多张CCD观测的联合平差 ,可以削弱单张CCD观测参考星数目过少、单张CCD观测参考星分布不均、个别参考星存在位置偏差和局部区域参考星存在系统性位置偏差等不利因素对归算结果的影响 ,进而达到扩大视场和提高归算精度的目的     

A neural network approach to ship track-keeping control

This paper presents an on-line trained neural net work controller for ship track-keeping problems. Following a brief review of the ship track-keeping control development since the 1980's, an analysis of various existing backpropagation-based neural controllers is provided. We then propose a single-input multioutput (SIMO) neural control strategy for situations where the exact mathematical dynamics of the ship are not available. The aim of this study is to build an autonomous neural controller which uses rudder to regulate both the tracking error and heading error. During the whole control process, the proposed SIMO neural controller adapts itself on-line from a direct evaluation of the control accuracy, and hence the need for a “teacher” or an off-line training process can be removed. With a relatively modest amount of quantitative knowledge of the ship behavior, the design philosophy enables real time control of a nonlinear ship model under random wind disturbances and measurement noise. Three different track-keeping tasks have been simulated to demonstrate the effectiveness of the training method and the robust performance of the proposed neural control strategy     

广东省拖网网囊调查

为实施中华人民共和国国家标准《南海区拖网网囊最小网目尺寸》,对广东省范围内拖网网囊现状进行摸底调查,结果表明,广东省沿海拖网渔船现用网囊网目尺寸(内径)在16.7～35.2 mm范围内,总体平均为27 mm,均未能达到1989年国家技术监督局发布的中华人民共和国国家标准--《南海区拖网网囊最小网目尺寸》--内径39 mm.     

图象的模型及其统计特性

本文对图象的统计特性及其适用模型作了分析。讨论了以前常用的平稳图象模型的缺陷,对实际图象的统计特性作了分析,认为它是非平稳的,不满足各态历经性,同时在空间上是高度相关的;讨论了相应的随机参数统计模型和描述性统计模型。指出作用于整幅图象的“全局”图象复原算法比每次只独立计算单个象元的“点”图象复原算法更为优越。     

Numerical prediction of blast‐induced stress wave from large‐scale underground explosion

This paper presents a numerical model for predicting the dynamic response of rock mass subjected to large‐scale underground explosion. The model is calibrated against data obtained from large‐scale field tests. The Hugoniot equation of state for rock mass is adopted to calculate the pressure as a function of mass density. A piecewise linear Drucker–Prager strength criterion including the strain rate effect is employed to model the rock mass behaviour subjected to blast loading. A double scalar damage model accounting for both the compression and tension damage is introduced to simulate the damage zone around the charge chamber caused by blast loading. The model is incorporated into Autodyn3D through its user subroutines. The numerical model is then used to predict the dynamic response of rock mass, in terms of the peak particle velocity (PPV) and peak particle acceleration (PPA) attenuation laws, the damage zone, the particle velocity time histories and their frequency contents for large‐scale underground explosion tests. The computed results are found in good agreement with the field measured data; hence, the proposed model is proven to be adequate for simulating the dynamic response of rock mass subjected to large‐scale underground explosion. Extended numerical analyses indicate that, apart from the charge loading density, the stress wave intensity is also affected, but to a lesser extent, by the charge weight and the charge chamber geometry for large‐scale underground explosions. Copyright © 2004 John Wiley & Sons, Ltd.