Some breakage characteristics of ultra-fine wet grinding with a centrifugal mill

A centrifugal mill is a high-power intensity media mill that can be used for ultra-fine grinding, employing centrifugal forces generated by gyration of the axis of the mill tube in a circle. The mill charge motion is quite different depending on the ratio of the gyration diameter to the mill diameter (G / D ratio), varying from a motion similar to that of a conventional tumbling media mill to that of a vibration mill. In this study, a centrifugal mill was constructed with an arrangement where the gyration diameter could be readily adjusted. The batch grinding characteristics of three different minerals (limestone, talc and illite) in water with dispersing agent were investigated at various G / D ratios. It was found that the optimum G / D ratio in terms of the specific energy consumption to give a desired fineness of product was different for the three minerals. This was due to their different reactions to the breakage mechanisms provided by the mill charge motion at varying G / D ratios. The size distributions became progressively narrower at increased grinding times, and particles finer than about 0.1 μm were not detected even for prolonged grinding times. Measurement of specific surface areas indicated that this was not due to an artifact of the size measurements by laser diffractometry. This implies that there is a limitation in which particles finer than 0.1 μm are not produced under the conditions tested in this type of mill, but further investigation is needed for experimental verification of this limit of comminution.     

A review of the ocean science and technology partnership between US and Korea

In 2001, the National Oceanic and Atmospheric Administration (NOAA) and the Ministry of Maritime Affairs and Fisheries Integrated Coastal and Ocean Resources Scientific and Technical Arrangement was signed to pursue scientific and technical cooperation in integrated coastal and ocean resources management in the mutual interest of the participants. Over the last 6 years, the cooperation has been very beneficial, particularly for advancing marine science and management programs in Korea, such as Deep Sea Aquaculture, Sea Grant College Program, Marine Protected Areas, and Ocean Observations. The benefits to NOAA from the cooperation include Deep-ocean Assessment and Reporting of Tsunamis (DART) buoys, ocean and coastal observations, GEOSS program, and Global Program of Action. Also the cooperation has spillover effects on other ocean science and technological arrangement between US and Korea. This article reviews purpose, obstacles, and achievement of the cooperation and suggests recommendations for the future steps.     

Modeling a major source of economic resilience to disasters: recapturing lost production

Terrorist attacks and natural disasters have potentially severe economic consequences in terms of property damage and business interruption. However, experience from the September 11 World Trade Center attack and other disasters indicates that the economy has a great deal of resilience. This refers to the ability to dampen the maximum potential economic output (business interruption) loss. One of the most prominent sources of resilience is the ability of businesses to reschedule, or recapture, lost production after the event. Although there have been applications of a fixed parameter recapture factor for each of several aggregated sectors of the economy, there has been little formal analysis of this resilience action. This study offers a theoretic framework for analyzing production rescheduling. It distinguishes the major conditions influencing two aspects that have previously been neglected: (1) the maximum time span over which the rescheduling can take place and (2) the likely decline of the maximum recapture as the business interruption increases. We divide the relevant time path into two periods after recovery. One is a function of a recaptured output path after recovery to the status of normal production. The other is a function for the maximum recaptured production, based on the recaptured output path. The recaptured output path function is assumed to follow a normal distribution function, and hence, total recaptured output follows the cumulative normal distribution function over time after productive capacity is restored. Also, we develop a new cumulative normal distribution function for interruption time duration, which is symmetric with respect to the output axis. This recapture function has unknown parameters. Empirical data on the recaptured amounts following an actual disaster can be used to estimate the parameters of this function using simulation methods.     

Crustal structure of the continental margin of Korea in the East Sea (Japan Sea) from deep seismic sounding data: evidence for rifting affected by the hotter than normal mantle

Despite the various opening models of the southwestern part of the East Sea (Japan Sea) between the Korean Peninsula and the Japan Arc, the continental margin of the Korean Peninsula remains unknown in crustal structure. As a result, continental rifting and subsequent seafloor spreading processes to explain the opening of the East Sea have not been adequately addressed. We investigated crustal and sedimentary velocity structures across the Korean margin into the adjacent Ulleung Basin from multichannel seismic (MCS) reflection and ocean bottom seismometer (OBS) data. The Ulleung Basin shows crustal velocity structure typical of oceanic although its crustal thickness of about 10 km is greater than normal. The continental margin documents rapid transition from continental to oceanic crust, exhibiting a remarkable decrease in crustal thickness accompanied by shallowing of Moho over a distance of about 50 km. The crustal model of the margin is characterized by a high-velocity (up to 7.4 km/s) lower crustal (HVLC) layer that is thicker than 10 km under the slope base and pinches out seawards. The HVLC layer is interpreted as magmatic underplating emplaced during continental rifting in response to high upper mantle temperature. The acoustic basement of the slope base shows an igneous stratigraphy developed by massive volcanic eruption. These features suggest that the evolution of the Korean margin can be explained by the processes occurring at volcanic rifted margins. Global earthquake tomography supports our interpretation by defining the abnormally hot upper mantle across the Korean margin and in the Ulleung Basin.     

Predicting natural arsenic contamination of bedrock groundwater for a local region in Korea and its application

A logistic regression model for the probability of arsenic exceeding the drinking water guidelines (10 μg/L) in bedrock groundwater was developed for a selected county in Korea, where arsenic occurrence and release reactions have been investigated. Arsenic was enriched naturally by the oxidation of sulfide minerals in metasedimentary rocks and mineralized zones, and due to high mobility in alkaline pH conditions, concentrations were high in groundwater of the county. When considering these reactions of arsenic release and water quality characteristics, several geological and geochemical factors were selected as influencing variables in the model. In the final logistic regression model, geological units of limestone and metasedimentary rocks, the concentrations of nitrate and sulfate, and distances to closed mines and adjacent granite were retained as statistically significant variables. Predicted areas of high probability agreed well with known spatial contamination patterns in the county. The model was also applied to an adjacent county, where the groundwater has not previously been tested for the presence of arsenic, and a probability map for arsenic contamination was then produced. Through the analysis of arsenic concentrations at the wells of high probability, it was determined that the applied model accurately indicated the arsenic contamination of groundwater. The logistic regression approach of this study can be applied to predict arsenic contamination in areas of similar geological and geochemical conditions to the county used in this model.     

Geostatistical integration using 2-D electrical resistivity and 3-D gravity methods for detecting cavities in a karst area

Two-dimensional (2-D) electrical resistivity and three-dimensional (3-D) gravity explorations were undertaken to estimate the 3-D distribution of karst cavities at the area of Yongweol-ri in Korea where ground subsidence has occurred. Although the gravity method is a low-cost way of analyzing a 3-D continuous structure, its vertical resolving power is poor. In contrast, the electrical resistivity method can provide a 2-D and/or 3-D subsurface structure with a much higher lateral and vertical resolution than the gravity method. Accordingly, geostatistical methods and density information were used to enhance the 2-D resistivity structure revealed by the electrical resistivity method into a 3-D structure. The assumptions are, first, that each data set senses the same underlying geological structure in terms of different material properties and, secondly, that two different material properties are correlated locally or globally throughout the entire target area. As a result, the distribution of limestone cavities can be estimated under the assumption that they are mostly filled with groundwater and clayey soils and have abnormally low levels of resistivity and density. The estimated distribution corresponds with the grouting, borehole imaging and monitoring data. In this example, it can be seen that the integration analysis of 2-D electrical resistivity and 3-D gravity methods is a very powerful tool for 3-D subsurface imaging and that the method can provide enhanced imaging capabilities for 3-D cavities.     

Active Region Coronal Rain Event Observed by the Fast Imaging Solar Spectrograph on the NST

The Fast Imaging Solar Spectrograph (FISS) is being operated on the New Solar Telescope of the Big Bear Solar Observatory. It simultaneously records spectra of Hα and Ca ii 8542 Å lines, and this dual-spectra measurement provides an estimate of the temperature and nonthermal speed components. We observed a loop structure in AR 11305 using the FISS, SDO/AIA, and STEREO/EUVI in 304 Å, and found plasma material falling along the loop from a coronal height into the umbra of a sunspot, which accelerated up to 80 km?s^?1. We also observed C2 and C7 flare events near the loop. The temperature of the downflows was in the range of 10?000?–?33?000 K, increasing toward the umbra. The temperature of the flow varied with time, and the temperature near the footpoint rose immediately after the C7 flare, but the temperature toward the umbra remained the same. There seemed to be a temporal correlation between the amount of downflow material and the observed C-class flares. The downflows decreased gradually soon after the flares and then increased after a few hours. These high-speed red-shift events occurred continuously during the observations. The flows observed on-disk in Hα and Ca ii 8542 Å appeared as fragmented, fuzzy condensed material falling from the coronal heights when seen off-limb with STEREO/EUVI at 304 Å. Based on these observations, we propose that these flows were an on-disk signature of coronal rain.