Ein Beitrag zur Frage der Eutrophierung des Bodensees durch den Alpenrhein

Zusammenfassung und Folgerungen Es darf als gesichert gelten, dass die 1961 im Auftrag der Internationalen Gew?sserschutzkommission für den Bodensee ermittelte Jahresfracht von 806 t Gesamtphosphor des Alpenrheins in bezug auf den gel?sten Gesamtphosphor viel zu hoch, in bezug auf die Summe von gel?stem und ungel?stem Gesamtphosphor aber wesentlich zu niedrig liegt. Die aus den Ergebnissen der 1961 er Untersuchung für den Alpenrhein gezogenen Schlussfolgerungen k?nnen daher nur zum Teil richtig sein. Kann durch die andernorts bereits durchgeführten Untersuchungen oder durch neue Abkl?rungen festgestellt werden, dass die aus der adsorptiven Bindung an die Rheinsedimente im Bodensee freigesetzte P-Menge kleiner oder gleich der gel?sten P-Fracht des Alpenrheins ist, so hat, die Forderung auf zus?tzliche Einrichtungen zur P-Elimination (3. Reinigungsstufe oder Simultanf?llung) bei den geplanten oder erstellten mechanisch-biologischen Kl?ranlagen im Einzugsgebiet des Bodensees ihre volle Berechtigung.

---

Summary and Conclusions It can be considered an established fact that the yearly load of 806 tons of total phosphorus for the Alpine reaches of the Rhine, determined in 1961 on behalf of the International Commission for the Protection of the Lake of Constance against Pollution, is much too high for the dissolved total phosphorus and significantly too low for the sum of the dissolved and undissolved total phosphorus. The conclusions drawn from the 1961 study of the Alpine regions of the Rhine can therefore be only partially correct. If it can be proven that the amount of phosphorus released from the sediments in the Lake of Constance is smaller or equal to the dissolved phosphorus load of the Alpine part of the Rhine, the demand for additional installations for phosphorus elimination (tertiary treatment of sewage or simultaneous precipitation) for the mechanical-biological sewage treatment plants in the catchment area of the Lake of Constance is fully justified.

     

Der Einfluss chinesischer Spaltproduktaerosole auf den in Stuttgart-Hohenheim gemessenen radioaktiven Befall

Zusammenfassung Am 9. Mai wurde der dritte chinesische Kernwaffenversuch durchgeführt. Als Folge konnte etwa vierzehn Tage nach dem Explosionszeitpunkt in Stuttgart-Hohenheim eine deutliche Zunahme des radioaktiven Befalls festgestellt werden. Für die gewonneuen Niederschlags-, Staub- und Luftfilterproben, sowie für ein Heisses Teilchen wurdent ^–(1+x )-Kurven gemessen, diex-Werte bestimmt und gammaspektrometrisch die Nuklidzusammensetzung untersucht. An den aufgefundenen Nukliddiskriminierungen ist bemerkenswert, dass das Heisse Teilchen eine deutliche⁹⁵Zr-⁹⁵ Nb-Anreicherung aufwies.

---

Summary The results of an investigation of the deposition of nuclear weapon debris from the third Chinese test explosion are discussed.t ^–(1+x )-curves were measured and the values of the parameterx are presented. The dry and precipitation fallout samples and a hot particle were gammaspectrometrically examined. Fractionation phenomena were studied.

     

Total least-squares adjustment of condition equations

The usual least-squares adjustment within an Errors-in-Variables (EIV) model is often described as Total Least-Squares Solution (TLSS), just as the usual least-squares adjustment within a Random Effects Model (REM) has become popular under the name of Least-Squares Collocation (without trend). In comparison to the standard Gauss-Markov Model (GMM), the EIV-Model is less informative whereas the REM is more informative. It is known under which conditions exactly the GMM or the REM can be equivalently replaced by a model of condition equations or, more generally, by a Gauss-Helmert Model. Similar equivalency conditions are, however, still unknown for the EIV-Model once it is transformed into such a model of condition equations. In a first step, it is shown in this contribution how the respective residual vector and residual matrix look like if the TLSS is applied to condition equations with a random coefficient matrix to describe the transformation of the random error vector. The results are demonstrated using a numeric example which shows that this approach may be valuable in its own right.     

Short Static GPS Sessions: Robust Estimation Results

Least-squares estimation (LS) yields results of low accuracy in the presentce of GPS phase-corrupting environmental conditions. We present a robust estimator that clearly identifies outlying observations caused by obstacles like diagonal cables, branches, or leaves. It performs significantly better than standard LS and signal-to-noise ratio dependent weighting if unfavorable signal distortion occurs, and is equal to LS otherwise. The estimator is realized by an iterated LS algorithm using an equivalent weight matrix. It is a generalization of the Danish Method to heterogeneous and correlated observations. The excellent peformance of the estimator for processing short static sessions is demonstrated using data obtained from an investigation of GPS signal obstruction. ? 2002 Wiley Periodicals, Inc.     

Airborne measurements of turbulent trace gas fluxes and analysis of eddy structure in the convective boundary layer over complex terrain

Using the new high-frequency measurement equipment of the research aircraft DO 128, which is described in detail, turbulent vertical fluxes of ozone and nitric oxide have been calculated from data sampled during the ESCOMPTE program in the south of France. Based on airborne turbulence measurements, radiosonde data and surface energy balance measurements, the convective boundary layer (CBL) is examined under two different aspects. The analysis covers boundary-layer convection with respect to (i) the control of CBL depth by surface heating and synoptic scale influences, and (ii) the structure of convective plumes and their vertical transport of ozone and nitric oxides. The orographic structure of the terrain causes significant differences between planetary boundary layer (PBL) heights, which are found to exceed those of terrain height variations on average. A comparison of boundary-layer flux profiles as well as mean quantities over flat and complex terrain and also under different pollution situations and weather conditions shows relationships between vertical gradients and corresponding turbulent fluxes. Generally, NO_x transports are directed upward independent of the terrain, since primary emission sources are located near the ground. For ozone, negative fluxes are common in the lower CBL in accordance with the deposition of O₃ at the surface.The detailed structure of thermals, which largely carry out vertical transports in the boundary layer, are examined with a conditional sampling technique. Updrafts mostly contain warm, moist and NO_x loaded air, while the ozone transport by thermals alternates with the background ozone gradient. Evidence for handover processes of trace gases to the free atmosphere can be found in the case of existing gradients across the boundary-layer top. An analysis of the size of eddies suggests the possibility of some influence of the heterogeneous terrain in mountainous area on the length scales of eddies.     

Convective Boundary-Layer Entrainment: Short Review and Progress using Doppler Lidar

The entrainment of air from the free atmosphere into the convective boundary layer is reviewed and further investigated using observations from a 2 μm Doppler lidar. It is possible to observe different individual processes entraining air into the turbulent layer, which develop with varying stability of the free atmosphere. These different processes are attended by different entrainment-zone thicknesses and entrainment velocities. Four classes of entrainment parametrizations, which describe relationships between the fundamental parameters of the process, are examined. Existing relationships between entrainment-zone thickness and entrainment velocity are basically confirmed using as scaling parameters boundary-layer height and convective velocity. An increase in the correlation coefficient between stability parameters based on the stratification of the free atmosphere and entrainment velocity (and entrainment-zone thickness respectively) up to 200% was possible using more suitable length and velocity scales.     

The impact of convergence zones on the initiation of deep convection: A case study from COPS

During the ‘Convective and Orographically-induced Precipitation Study’ (COPS) performed in summer 2007, deep convection developed on July 15, although convective available potential energy was only moderate and convective inhibition was high. Convection was restricted to an area east of the Black Forest crest. Data analysis revealed that the convection was triggered by different mechanisms. Due to a surface high which was situated east of the Black Forest and a surface low which approached the investigation area from the west, a mesoscale convergence zone was established between the two regions and moved eastwards. Secondly, high insolation favoured the development of slope and valley winds and high evapotranspiration resulted in an increase of moisture in the planetary boundary layer (PBL). The thermally driven circulation systems formed a convergence zone along the mountain crest. When the synoptically induced mesoscale convergence zone reached the Black Forest, the different convergence zones superimposed optimally, such that strong updraughts were observed above the mountain. These updraughts penetrated the PBL-capping inversion and nearly reached the level of free convection. About 15 min after the convergence zone had passed the Black Forest crest, first clouds developed east of it. While moving further eastwards, the convergence zone intensified and became visible as a north-south oriented cloud line in the satellite images. Some deep convective cells with precipitation formed within the cloud line. The dense COPS network allowed the capture of the position and characteristics of the convergence zone and explains why convection developed in some restricted areas only.     

On the impact of rockfall catch fences on ground-based radar interferometry

Rockfalls are major natural hazards in mountainous regions and as such monitored if they pose a high risk to people or infrastructure. Ground-based radar interferometry is a relatively new technique suitable for such monitoring. It offers the potential for determining sub-mm- to mm-level displacements by remote measurements under various weather conditions. To avoid damage from smaller rocks and debris, critical surfaces are often protected by rockfall catch fences. We present an experimental investigation proving that the radar measurements are indeed significantly affected by a catch fence made of steel even if its mesh size is larger compared to that of the wavelength of the radar. A stable rock wall in a quarry was monitored by means of a ground-based synthetic aperture radar for 2 days. Different fences varying in shape, size, and density of mesh and in various geometrical configurations were erected at different locations for short periods of time during the experiment. We show that for surfaces observed through the fence, the reflected power can be reduced by 20 dB and thus the signal-to-noise ratio is significantly deteriorated. We also observed spurious interferometric phase shifts. Even parts of the rock wall not covered by the fences are affected. Side lobes and mixed pixels result, e.g., in severe loss of coherence and thus potentially mask actual displacements.     

An Impacting Descent Probe for Europa and the Other Galilean Moons of Jupiter

We present a study of an impacting descent probe that increases the science return of spacecraft orbiting or passing an atmosphere-less planetary bodies of the solar system, such as the Galilean moons of Jupiter. The descent probe is a carry-on small spacecraft (<100 kg), to be deployed by the mother spacecraft, that brings itself onto a collisional trajectory with the targeted planetary body in a simple manner. A possible science payload includes instruments for surface imaging, characterisation of the neutral exosphere, and magnetic field and plasma measurement near the target body down to very low-altitudes (~1 km), during the probe’s fast (~km/s) descent to the surface until impact. The science goals and the concept of operation are discussed with particular reference to Europa, including options for flying through water plumes and after-impact retrieval of very-low altitude science data. All in all, it is demonstrated how the descent probe has the potential to provide a high science return to a mission at a low extra level of complexity, engineering effort, and risk. This study builds upon earlier studies for a Callisto Descent Probe for the former Europa-Jupiter System Mission of ESA and NASA, and extends them with a detailed assessment of a descent probe designed to be an additional science payload for the NASA Europa Mission.