Excitation mechanism of atmospheric pressure waves from the 1980 Mount St Helens eruption

Summary. Atmospheric pressure waves from the Mount St Helens eruption 1980 May 18 have been clearly recorded by a sensitive microbarograph at Berkeley, California. The record shows three types of waves with different group velocities. The pressure waves can be interpreted in terms of direct waves A1, antipodean travelling waves A2 and circumnavigating waves A3, all of which are composed of several acoustic-gravity modes propagated in the lower atmosphere. Synthetic barograms appropriate to the Berkeley station have been calculated on the basis of the dynamic response of the lower atmospheric structure, together with various assumptions of source properties. Comparisons between synthetic and observed barograms provide estimates for ranges of the time history of upward particle velocity at the source, source dimensions and the velocity of the source spreading over the blast zone, as well as for the average dissipation effects over the circumferential path. The results suggest that two major compression pulses on the A1 record correlate with the arrival of pressure waves from the first (lateral) blast and second (vertical) blast, although the inferred interblast time interval is not consistent with that estimated from seismic observations.     

Ecologic and taxonomic diversification in the Mesozoic brackish-water bivalve faunas in Japan, with emphasis on infaunalization of heterodonts

Mesozoic brackish-water bivalve faunas in Japan diversified in three steps: at the beginning of the Early Jurassic, Early and Late Cretaceous. The Hettangian Niranohama Fauna in northeastern Honshu represents the establishment of a heterodont-dominated brackish-water fauna that persisted until the early Late Cretaceous. No similar composition is known from the Triassic. The infauna consists mostly of non-siphonate and some short-siphonate heterodonts, while the epifauna is represented by diverse pteriomorphian families. In the Early Cretaceous Tetori Group in central Honshu, the long-siphonate heterodonts Tetoria (Corbiculidae) and the semi-infaunal soft-bottom oyster Crassostrea appeared. The evolutionary diversification of the latter, known as the most important element of modern brackish-water faunas, may thus originate at that time. In the early Late Cretaceous (Cenomanian) of the Goshoura and Mifune Groups in west Kyushu, several euryhaline deep-burrowing heterodont families, such as Veneridae and Tellinidae, further diversified in the brackish and marine environments. The Late Cretaceous is characterized by massive shell biolithic beds in which large Crassostrea species are common, a feature common for Cenozoic brackish-water faunas. The long-term changes in the composition of the brackish-water faunas in Japan represents thus an evolutionary record, irrespective of the severe physiological and environmental conditions imposed on the highly conservative nature of the fauna.     

Measuring the k–S–p relations on DNAPLs migration

Migration characteristics of dense non-aqueous phase liquids (DNAPLs) in the subsurface can be expressed as a water–DNAPL two-phase system based on mainly the k–S–p relations, which describe the relations among relative permeability (k), degree of water saturation (S), and capillary pressure head (p). The aims of this research are to develop an experimental system with new type of probes, such as the electrical conductivity probe for measuring the degree of water saturation and the hydrophilic and hydrophobic tensiometer for measuring the pore water and DNAPL pressures, and also to estimate the results obtained from the developed experimental system. From these tests, the excellent k–S–p relations were obtained and the efficiency and validity of this developed experimental system have been confirmed in terms of the concept of the scaling coefficient calculated by interfacial tensions.     

Dynamical rupture process on a three-dimensional fault with non-uniform frictions and near-field seismic waves

Summary. Dynamical rupture process on the fault is investigated in a quasi-three-dimensional faulting model with non-uniform distributions of static frictions or the fracture strength under a finite shearing pre-stress. The displacement and stress time functions on the fault are obtained by solving numerically the equations of motion with a finite stress—fracture criterion, using the finite difference method.
If static frictions are homogeneous or weakly non-uniform, the rupture propagates nearly elliptically with a velocity close to that of P waves along the direction of pre-stress and with a nearly S wave velocity in the direction perpendicular to it. The rise time of the source function and the final displacements are larger around the centre of the fault. In the case when the static frictions are heavily non-uniform and depend on the location, the rupture propagation becomes quite irregular with appreciably decreased velocities, indicating remarkable stick-slip phenomena. In some cases, there remain unruptured regions where fault slip does not take place, and high stresses remain concentrated up to the final stage. These regions could be the source of aftershocks at a next stage.
The stick—slip faulting and irregular rupture propagation radiate high-frequency seismic waves, and the near-field spectral amplitudes tend to show an inversely linear frequency dependence over high frequencies for heavily non-uniform frictional faults.     

中国沿海及内陆地区长周期脉动特征分析

地脉动台阵观测作为一种低成本的剪切波速度构造探测方法,预计将在中国地震灾害预防中起到重要作用。为了研究地脉动台阵观测中长周期信号的特征以及中国长周期地脉动的特点和适用性,开展了中国从沿海到内陆地区地脉动信号的观测和分析,探查由沿海到内陆地区地脉动的变化规律以及内陆地区广域的地脉动特征,发展适合于我国内陆地区的基于地脉动的地下构造勘探方法,在中国大陆上海市、西安市、天水市及兰州市进行了长周期地脉动观测。现场试验结果表明,上海地脉动特征与日本关东平原地区的观测结果类似,可以认为在海岸地区深部结构调查的地脉动台阵观测有良好的适用性。然而,西安、兰州、天水长周期地脉动能量只有上海的千分之一,因此需要进一步研究更加灵敏的仪器性能和更加稳定的观测方法。     

Impact-induced phyllosilicate formation from olivine and water

Shock-recovery experiments on mixtures of olivine and water with gas (air) were performed in a previous study to demonstrate water-mineral interactions during impact events (Furukawa et al., 2007). The products of these former experiments were investigated in the present study using transmission electron microscopy, scanning electron microscopy, and X-ray powder diffraction with the aim of finding evidence of aqueous alteration. Serpentine formed on the surface of shocked olivine with well-developed mosaicism. The yield of serpentine depended on the water/olivine ratio in the starting material, indicating progressive serpentinization under water-rich conditions. Comminution and mosaicism were developed in shocked olivine grains. The temperature and pressure changes of the samples during the experiments were estimated by constructing Hugoniots for mixtures of olivine and water, combined with the results of an additional fracturing experiment on a shocked container. Pressures and temperatures reached 4.6-7.2 GPa and at least 230-390 °C, respectively, for 0.7 μs during in-shock compression. Post-shock temperatures reached a maximum of ∼1300 °C, when the shock wave reached the gas in the sample cavity. The serpentine formed after the post-shock temperature maximum, most likely when temperatures dropped to between 200 and 400 °C. This is the first experiment to demonstrate the formation of phyllosilicates using heat supplied by an impact. The present results and estimations suggest that phyllosilicates could form as a result of impacts into oceans as well as by impacts on terrestrial and Martian crustal rocks, and on some asteroidal surfaces, where liquid or solid H₂O is available. A significant amount of phyllosilicates would have formed during the late heavy bombardment of meteorites on the Hadean Earth, and such phyllosilicates might have affected the prebiotic carbon cycle.     

Reducing global GHG emissions by replicating successful sector examples: the ‘good practice policies’ scenario

This article shows the potential impact on global GHG emissions in 2030, if all countries were to implement sectoral climate policies similar to successful examples already implemented elsewhere. This assessment was represented in the IMAGE and GLOBIOM/G4M models by replicating the impact of successful national policies at the sector level in all world regions. The first step was to select successful policies in nine policy areas. In the second step, the impact on the energy and land-use systems or GHG emissions was identified and translated into model parameters, assuming that it would be possible to translate the impacts of the policies to other countries. As a result, projected annual GHG emission levels would be about 50 GtCO₂e by 2030 (2% above 2010 levels), compared to the 60 GtCO₂e in the ‘current policies’ scenario. Most reductions are achieved in the electricity sector through expanding renewable energy, followed by the reduction of fluorinated gases, reducing venting and flaring in oil and gas production, and improving industry efficiency. Materializing the calculated mitigation potential might not be as straightforward given different country priorities, policy preferences and circumstances.

Key policy insights

• Considerable emissions reductions globally would be possible, if a selection of successful policies were replicated and implemented in all countries worldwide.

• This would significantly reduce, but not close, the emissions gap with a 2°C pathway.

• From the selection of successful policies evaluated in this study, those implemented in the sector ‘electricity supply’ have the highest impact on global emissions compared to the ‘current policies’ scenario.

• Replicating the impact of these policies worldwide could lead to emission and energy trends in the renewable electricity, passenger transport, industry (including fluorinated gases) and buildings sector, that are close to those in a 2°C scenario.

• Using successful policies and translating these to policy impact per sector is a more reality-based alternative to most mitigation pathways, which need to make theoretical assumptions on policy cost-effectiveness.