Identification of Pb sources in Yellow Sea sediments using stable Pb isotope ratios

Rapid economic developments in East Asian countries have inevitably resulted in environmental degradation in the surrounding seas, and concern for both the environment and protection from pollutants is increasing. Identification of sources of contaminants is essential to environmental pollution management. In this study, the provenance of anthropogenic lead (Pb), a major pollutant of Yellow Sea sediments, was determined for river mouth sediments, including those of the Changjiang, Huanghe, Han, and Geum Rivers, and for age-determined shelf core sediments through the measurement of Pb isotope ratios in the HCl-leached fraction using multi-collector inductively coupled plasma-mass spectrometry (MC ICP/MS). Anthropogenic Pb has accumulated in shelf core sediments since 1910, and its isotope ratios were estimated as 0.863–0.866 and 2.119–2.125 for ²⁰⁷Pb/²⁰⁶Pb and ²⁰⁸Pb/²⁰⁶Pb, respectively, from the mixing relationships of the two endmembers. River mouth sediments exhibited enough distinction in anthropogenic Pb isotope ratios to be discriminated: 0.874 (2.144) in the Huanghe, 0.856 (2.129) in the Han, 0.857 (2.122) in the Geum, and 0.854 (2.101) in the Changjiang for ²⁰⁷Pb/²⁰⁶Pb (²⁰⁸Pb/²⁰⁶Pb), respectively. Although isotope ratios of geogenic Pb in sediments dating before 1910 showed narrow ranges (0.842–0.845 and 2.088–2.100 for ²⁰⁷Pb/²⁰⁶Pb and ²⁰⁸Pb/²⁰⁶Pb, respectively), distinct isotope ratios in each core permitted source identification of sediments in the Yellow Sea based on geographic locations and the geogenic Pb of each river. By comparing the isotope ratios of the estimated anthropogenic Pb to source-related materials, the provenances of anthropogenic Pb in Chinese river sediments were presumed to be Chinese coal or ore, which is also a major source of atmospheric particulate Pb. The anthropogenic Pb in the shelf core sediments in the northern Yellow Sea originated from northern Chinese cities such as Beijing and Tianjin through atmospheric pathways. Pb isotope ratios indicated that Pb in Korean river sediments was characteristic of local Korean ores.     

Development of statistical seasonal prediction models of Arctic Sea Ice concentration using CERES absorbed solar radiation

Statistical seasonal prediction models for the Arctic sea ice concentration (SIC) were developed for the late summer (August-October) when the downward trend is dramatic. The absorbed solar radiation (ASR) at the top of the atmosphere in June has a significant seasonal leading role on the SIC. Based on the lagged ASR-SIC relationship, two simple statistical models were established: the Markovian stochastic and the linear regression models. Crossvalidated hindcasts of SIC from 1979 to 2014 by the two models were compared with each other and observation. The hindcasts showed general agreement between the models as they share a common predictor, ASR in June and the observed SIC was well reproduced, especially over the relatively thin-ice regions (of one- or multi-year sea ice). The robust predictability confirms the functional role of ASR in the prediction of SIC. In particular, the SIC prediction in October was quite promising probably due to the pronounced icealbedo feedback. The temporal correlation coefficients between the predicted SIC and the observed SIC were 0.79 and 0.82 by the Markovian and regression models, respectively. Small differences were observed between the two models; the regression model performed slightly better in August and September in terms of temporal correlation coefficients. Meanwhile, the prediction skills of the Markovian model in October were higher in the north of Chukchi, the East Siberian, and the Laptev Seas. A strong non-linear relationship between ASR in June and SIC in October in these areas would have increased the predictability of the Markovian model.     

Effects of particle shape on the cushioning mechanics of rock-filled gabions

Acta Geotechnica - Rock-filled gabions are commonly installed in front of reinforced concrete structures to reduce concentrated impact loads induced by rock fall and boulders entrained in debris...     

The Kyonggi Shear Zone of the Central Korean Peninsula: Late Orogenic Imprint of the North and South China Collision

The crustal-scale Kyonggi shear zone of central Korea has been identified as a major boundary between the Precambrian Kyonggi massif in the south and the Imjingang belt in the north. The latter is an eastward extension of the Qinling-Dabie-Sulu collisional belt of China. Field observations and microstructural analysis indicate that the extensional shear zone evolved from a deep crustal ductile regime to a shallow crustal brittle regime, associated with a rapid uplift of the Kyonggi massif following the Late Permian-Early Triassic collision between the Sino-Korean and Yangtze cratons. A Rb-Sr muscovite age (226+/-1.2 Ma) of the mylonite suggests that the extensional ductile shearing occurred during the Late Triassic.     

A review of coal properties pertinent to carbon dioxide sequestration in coal seams: with special reference to Victorian brown coals

This paper presents reviews of studies on properties of coal pertinent to carbon dioxide (CO₂) sequestration in coal with specific reference to Victorian brown coals. The coal basins in Victoria, Australia have been identified as one of the largest brown coal resources in the world and so far few studies have been conducted on CO₂ sequestration in this particular type of coals. The feasibility of CO₂ sequestration depends on three main factors: (1) coal mass properties (chemical, physical and microscopic properties), (2) seam permeability, and (3) gas sorption properties of the coal. Firstly, the coal mass properties of Victorian brown coal are presented, and then the general variations of the coal mass properties with rank, for all types of coal, are discussed. Subsequently, coal gas permeability and gas sorption are considered, and the physical factors which affect them are examined. In addition, existing models for coal gas permeability and gas sorption in coal are reviewed and the possibilities of further development of these models are discussed. According to the previous studies, coal mass properties and permeability and gas sorption characteristics of coals are different for different ranks: lignite to medium volatile bituminous coals and medium volatile bituminous to anthracite coals. This is important for the development of mathematical models for gas permeability and sorption behavior. Furthermore, the models have to take into account volume effect which can be significant under high pressure and temperature conditions. Also, the viscosity and density of supercritical CO₂ close to the critical point can undergo large and rapid changes. To date, few studies have been conducted on CO₂ sequestration in Victorian brown coal, and for all types of coal, very few studies have been conducted on CO₂ sequestration under high pressure and temperature conditions.     

Slope inclinometers for landslides

Slope inclinometers/indicators are used to determine the magnitude, rate, direction, depth, and type of landslide movement. This information is usually vitally important for understanding the cause, behavior, and remediation of a landslide. However, many inclinometer measurements fail to achieve these intended aims because of lack of appreciation of the many factors that need to be correctly implemented during installation, monitoring, and data reduction to yield useful data. This paper presents some guidelines for understanding, installing, and interpreting slope inclinometers and presents three case histories that illustrate some of the pitfalls that can develop if these guidelines are not followed.     

Increased As load to the Uchen stream due to mine drainage and soils in the abandoned Kangwon mining district of Korea

To determine the appropriate allocation of resources for the future restoration of the abandoned mining district of Kangwon in Korea, identification of the main pollutants and the main sources discharging these pollutants is crucial. Therefore, a 2-year study was undertaken to quantify the amount of pollutants in the Uchen stream (a potential sink for contamination), which runs through the district, and to determine the potential sources of these pollutants, including mine drainage and soil. Arsenic (As) was the main pollutant in mine drainage and soils showing concentrations above the Korean regulated standard levels of 50 μg L⁻¹ and 50 mg kg⁻¹ for water and soil, respectively. In addition, the pollution index (PI) showed that mine drainages were polluted by As to a moderate (2 ≤ PI < 3) or strong (4 ≤ PI < 5) degree. Consequently, As load in mine drainage and soil contributed to increased amounts of As in the stream. The As loads in mine drainages (11 and 587 g month⁻¹ for mine adit 1 and 2, respectively) accounted for only 9% of the total As load to the stream (6,378 g month⁻¹); and the influence of mine drainages on As contents in the stream was more reliant on the total volume of mine drainage generated rather than the As concentration in the mine drainage. Approximately 91% of the As in the stream was derived from the soils within the study area.     

Sequential extraction and leaching characteristics of heavy metals in abandoned tungsten mine tailings sediments

The chemical speciation of potentially toxic elements (As, Cd, Cu, Pb, and Zn) in the contaminated soils and sulfides-rich tailings sediments of an abandoned tungsten mine in Korea was evaluated by conducting modified BCR sequential extraction tests. Kinetic and static batch leaching tests were also conducted to evaluate the potential release of As and other heavy metals by acidic rain water and the leaching behaviors of these heavy metals. The major sources of the elements were As-, Zn- and Pb-bearing sulfides, Pb carbonates (i.e., cerussite), and Pb sulfates (i.e., anglesite). The biggest pollutant fraction in these soil and tailing samples consists of metals bound to the oxidizable host phase, which can be released into the environment if conditions become oxidative, and/or to residual fractions. No significant difference in total element concentrations was observed between the tailings sediments and contaminated soils. For both sample types, almost no changes occurred in the mobility of As and the other heavy metals at 7 days, but the mobility increased afterwards until the end of the tests at 30 days, regardless of the initial pH. However, the mobility was approximately 5–10 times higher at initial pH 1.0 than at initial pHs of 3.0 and 5.0. The leached amounts of all the heavy metal contents were higher from tailings sediments than from contaminated soils at pH > 3.0, but were lower at pH < 3.0 except for As. Results of this study suggest that further dissolution of heavy metals from soil and tailing samples may occur during extended rainfall, resulting in a serious threat to surface and groundwater in the mine area.     

Geological and geotechnical aspects of underground coal mining methods within Australia

About one quarter of the coal produced in Australia is by underground mining methods. The most commonly used underground coal mining methods in Australia are longwall, and room and pillar. This paper provides a detailed review of the two methods, including their advantages and disadvantages, the major geotechnical and operational issues, and the factors that need to be considered regarding their choice, including the varying geological and geotechnical conditions suited to a particular method. Factors and issues such as capital cost, productivity, recovery, versatility and mine safety associated with the two methods are discussed and compared. The major advantages of the longwall mining method include its suitability for mining at greater depth, higher recovery, and higher production rate compared to room and pillar. The main disadvantages of the room and pillar method are the higher risks of roof and pillar collapse, higher capital costs incurred as well as lower recovery rate.