Morphometric analysis using remote sensing techniques in the chaka sub-basin, purulia district, West Bengal

Remote sensing techniques using satellite imagery have proved to be an indispensible tool in morphometric analysis and groundwater studies. In the present area, morphometric analysis using temote sensing techniques have been carried out in Chaka river sub-basin of Manbazar Block, Purulia district, West-Bengal, which is one of the most drought affected area in West-Bengal. The parameters worked out include Bifurcation ratio (R_b), Stream length (L_u). Form factor (R_f), Circulatory ratio (R_c), and Drainage density. The morphometric analysis suggests that the area is covered by fractured, resistant, permeable rocks, the drainage network not so affected by tectonic disturbances. Using satellite imageries of LANDSAT and IRS, different hydrogeomorphological units have been delineated. The study shows that moderately weathered pediplains and valley fills are good prospective zones for groundwater exploration.     

The effects of suspended sediment on brown trout (Salmo trutta) feeding and respiration after macrophyte control

Sediment resuspension during and after mechanical excavation of macrophytes may have a significant impact on resident fish populations. Unfortunately, little is known about the influence of this sediment on the respiratory performance and feeding abilities of fishes in New Zealand waterways. We examined the effects of suspended sediment (SS) concentrations previously observed after a large-scale macrophyte removal operation on oxygen consumption (MO₂) and feeding rates of brown trout (Salmo trutta). MO₂ at 0 mg L^?1, 150 mg L^?1, 300 mg L^?1, 450 mg L^?1 and 600 mg L^?1 of SS was measured using semi-closed respirometry. Feeding rates at the same SS concentrations were also measured using laboratory tank experiments. Results suggest that SS concentrations up to 600 mg L^?1 have no effect on MO₂. Conversely, feeding rates were significantly reduced at 450 mg L^?1 (22% reduction) and 600 mg L^?1 (31% reduction), indicating that sediment concentrations above 450 mg L^?1 may negatively affect brown trout populations.     

Encapsulated Cell Bioremediation: Evaluation on the Basis of Particle Tracer Tests

Microencapsulation of degradative organisms enhances microorganism survivability (Stormo and Crawford 1994). The use of encapsulated cell microbeads for in situ biodegradation depends not only on microorganism survival but also on microbead transport characteristics. Two forced-gradient, recirculating-loop tracer experiments were conducted to evaluate the feasibility of encapsulated cell transport and bioremediation on the basis of polystyrene microsphere transport results. The tracer tests were conducted in a shallow, confined, unconsolidated, heterogeneous, sedimentary aquifer using bromide ion and 2 μm, 5 μn, and 15 μm microsphere tracers. Significant differences were observed in the transport of bromide solute and polystyrene microspheres. Microspheres reached peak concentrations in monitoring wells before bromide, which was thought to reflect the influence of aquifer heterogeneity. Greater decreases in microsphere C/C_o ratios were observed with distance from the injection wells than in bromide C/C_o ratios, which was attributed to particle filtration and/or settling. Several methods might be considered for introducing encapsulated cell microbeads into a subsurface environment, including direct injection into a contaminated aquifer zone, injection through a recirculating ground water flow system, or emplacement in a subsurface microbial curtain in advance of a plume. However, the in situ use of encapsulated cells in an aquifer is probably limited to aquifers containing sufficiently large pore spaces, allowing passage of at least some encapsulated cells. The use of encapsulated cells may also be limited by differences in solute and microbead transport patterns and flowpath clogging by larger encapsulated cell microbeads.     

Bioaugmentation and Propane Biosparging for In Situ Biodegradation of 1,4‐Dioxane

Propane biosparging and bioaugmentation were applied to promote in situ biodegradation of 1,4‐dioxane at Site 24, Vandenberg Air Force Base (VAFB), CA. Laboratory microcosm and enrichment culture testing demonstrated that although native propanotrophs appeared abundant in the shallow water‐bearing unit of the aquifer (8 to 23 ft below ground surface [bgs]), they were difficult to be enriched from a deeper water‐bearing unit (82 to 90 feet bgs). Bioaugmentation with the propanotroph Rhodococcus ruber ENV425, however, supported 1,4‐dioxane biodegradation in microcosms constructed with samples from the deep aquifer. For field testing, a propane‐biosparging system consisting of a single sparging well and four performance monitoring wells was constructed in the deep aquifer. 1,4‐dioxane biodegradation began immediately after bioaugmentation with R. ruber ENV425 (36 L; 4 × 10⁹ cells/mL), and apparent first‐order decay rates for 1,4‐dioxane ranged from 0.021 day^?1 to 0.036 day^?1. First‐order propane consumption rates increased from 0.01 to 0.05 min^?1 during treatment. 1,4‐dioxane concentrations in the sparging well and two of the performance monitoring wells were reduced from as high as 1090 µg/L to <2 µg/L, while 1,4‐dioxane concentration was reduced from 135 µg/L to 7.3 µg/L in a more distal third monitoring well. No 1,4‐dioxane degradation was observed in the intermediate aquifer control well even though propane and oxygen were present. The demonstration showed that propane biosparging and bioaugmentation can be used for in situ treatment of 1,4‐dioxane to regulatory levels.     

Urban land use mapping: A case study of ahmedabad city and its environs

Proper urban planning and effective implementation requires reliable urban land use statistics. In this context, satellite remote sensing data has been studied using both visual and digital techniques. A portable eight-band radiometer has been used to collect spectral signatures of surface features present in Ahmedabad city and its environs. Using these signatures a suitable approach employing visual and digital techniques has been developed for urban land use/sprawl mapping. Urban land-use maps of Ahmedabad city and its environs were prepared on 1:25,000 scale and for Ahmedabad Urban Development Authority Area on 1:50,000 scale using this methodology. It has been found that edge-enhancement techniques are useful to enhance the contrast among different urban land uses. Classification techniques such as MXL and Bayes classifiers are not successful in discriminating urban land uses. Tonal characteristics alongwith other elements of interpretation are required to classify urban land uses such as residential, industrial etc. Spatial distribution of various urban and uses and the space devoted to each urban land use has been brought out.     

A TEST OF SIGNIFICANCE FOR PARTIAL LEAST SQUARES REGRESSION

Partial least squares (PLS) regression is a commonly used statistical technique for performingmultivariate calibration, especially in situations where there are more variables than samples. Choosingthe number of factors to include in a model is a decision that all users of PLS must make, but iscomplicated by the large number of empirical tests available. In most instances predictive ability is themost desired property of a PLS model and so interest has centred on making this choice based on aninternal validation process. A popular approach is the calculation of a cross-validated r~2 to gauge howmuch variance in the dependent variable can be explained from leave-one-out predictions. Using MonteCarlo simulations for different sizes of data set, the influence of chance effects on the cross-validationprocess is investigated. The results are presented as tables of critical values which are compared againstthe values of cross-validated r~2 obtained from the user's own data set. This gives a formal test forpredictive ability of a PLS model with a given number of dimensions.     

Does one size fit all? An evaluation of length–weight relationships for New Zealand's freshwater fish species

Length–weight relationships are a fundamental tool for assessing populations and communities in fisheries science. Many researchers have collected length–weight data throughout New Zealand, yet parameters describing these relationships remain unpublished for many species of freshwater fish. We compiled 285,124 fish records from researchers and institutions across New Zealand to parameterise length–weight equations, using both power and quadratic models, for 53 freshwater species belonging to 13 families. The influence of location and sex on length–weight relationships was also assessed. Location, in particular, generated different length–weight relationships for 65% of the species examined. Length–weight equations were validated by comparing predicted weights against independently measured weights from 25 electrofished sites across New Zealand and the equations were highly accurate (R²>0.99). Recommendations are made about how to robustly apply this new resource which should assist freshwater fisheries researchers throughout New Zealand.     

A review of volatile compounds in tektites,and carbon content and isotopic composition of moldavite glass

Abstract– Tektites, natural silica‐rich glasses produced during impact events, commonly contain bubbles. The paper reviews published data on pressure and composition of a gas phase contained in the tektite bubbles and data on other volatile compounds which can be released from tektites by either high‐temperature melting or by crushing or milling under vacuum. Gas extraction from tektites using high‐temperature melting generally produced higher gas yield and different gas composition than the low‐temperature extraction using crushing or milling under vacuum. The high‐temperature extraction obviously releases volatiles not only from the bubbles, but also volatile compounds contained directly in the glass. Moreover, the gas composition can be modified by reactions between the released gases and the glass melt. Published data indicate that besides CO₂ and/or CO in the bubbles, another carbon reservoir is present directly in the tektite glass. To clarify the problem of carbon content and carbon isotopic composition of the tektite glass, three samples from the Central European tektite strewn field—moldavites—were analyzed. The samples contained only 35–41 ppm C with δ¹³C values in the range from ?28.5 to ?29.9‰ VPDB. This indicates that terrestrial organic matter was a dominant carbon source during moldavite formation.     

Persistence and biodegradation of kerosene in high-arctic intertidal sediment

A kerosene type hydrocarbon fraction (equivalent to 7 L m(-2)) was added to enclosures in the surface layer of high-arctic intertidal beach sediment. The experimental spill was repeated in two consecutive years in the period July-September. The rate and extent of hydrocarbon removal and the accompanying bacterial response were monitored for 79 days (2002) and 78 days (2003). The bulk of added kerosene, i.e. 94-98%, was lost from the upper 5 cm layer by putatively abiotic processes within 2 days and a residual fraction in the range 0.6-1.2mg per g dry sediment was stably retained. Concomitant addition of oleophilic fertilizer led to higher initial retention, as 24% of the kerosene remained after 2 days in the presence of a modified, cold-climate adapted version of the well-known Inipol EAP 22 bioremediation agent. In these enclosures, which showed an increase in hydrocarbon-degrader counts from 6.5 x 10(3) to 4.1 x 10(7) per g dry sediment within 8 days, a 17% contribution by biodegradation to subsequent hydrocarbon removal was estimated. Stimulation in hydrocarbon-degrader counts in fertilizer-alone control enclosures was indistinguishable from the stimulation observed with both kerosene and fertilizer present, suggesting that the dynamics in numbers of hydrocarbon-degrading bacteria was primarily impacted by the bioremediation agent.     

Soil erosion assessment and mapping of the algar river watershed (uttar pradesh) using remote sensing technique

This study was undertaken to prepare an inventory on soil erosion of a hilly river watershed — the Aglar watershed, part of Tehri Garhwal and Dehradun districts (U.P.), using terrain physiography and soil survey data obtained from interpretation and analysis of Landsat TM FCC (1:62,500 scale) and limited ground investigations. The watershed is divided into four broad physiographic units viz. higher Himalayas (> 2000m elevation); lower Himalayas (< 2000m elevation); river terraces and flood plains. Each physiographic unit has been further divided into subunits on the basis of aspects and landuse. Three major orders of soils viz. Inceptisols, Mollisols and Entisols were found in different physiographic units. Soil, and land properties of soilscape units viz. soil depth, texture, structure, slope, landuse and soil temperature regime were evaluated for soil-erosion hazard. The results indicate that in the whole watershed 19.13%, 45.68%, 26.51% and 7.92% areas have been found to be under none to slight, moderate, severe and very severe soil erosion hazard categories, respectively.