Rare earth, major and trace elements in Jurassic manganese shales of the Northern Calcareous Alps: hydrothermal versus hydrogenous origin of stratiform manganese deposits

Summary ?The rare earth, major and trace element geochemistry of Jurassic deep marine manganese shales allow insight into their environment of deposition. We present data of 24 samples from the Northern Calcareous Alps (Eastern Alps), collected from Late Jurassic strata of the Tennengebirge and from Early Jurassic strata of the Karwendel Mts. Whereas major and trace element geochemistry is controlled by the detrital input, rare earth element data and the relationship between total organic carbon and (pyritic) sulfur can be used to constrain the origin of the manganese accumulation. The data of this study are compatible with a hydrogenous precipitation of manganese by strongly varying redox-conditions at the sediment–water interface of a slope basin. Received December 21, 2001; revised version accepted February 18, 2002     

Superdense CO2 inclusions in Cretaceous quartz–stibnite veins hosted in low-grade Variscan basement of the Western Carpathians, Slovakia

CO₂ inclusions with density up to 1,197 kg m⁻³ occur in quartz–stibnite veins hosted in the low-grade Palaeozoic basement of the Gemericum tectonic unit in the Western Carpathians. Raman microanalysis corroborated CO₂ as dominant gas species accompanied by small amounts of nitrogen (<7.3 mol%) and methane (<2.5 mol%). The superdense CO₂ phase exsolved from an aqueous bulk fluid at temperatures of 183–237°C and pressures between 1.6 and 3.5 kbar, possibly up to 4.5 kbar. Low thermal gradients (∼12–13°C km⁻¹) and the CO₂–CH₄–N₂ fluid composition rule out a genetic link with the subjacent Permian granites and indicate an external, either metamorphogenic (oxidation of siderite, dedolomitization) or lower crustal/mantle, source of the ore-forming fluids.According to microprobe U–Pb–Th dating of monazite, the stibnite-bearing veins formed during early Cretaceous thrusting of the Gemeric basement over the adjacent Veporic unit. The 15- to 18-km depth of burial estimated from the fluid inclusion trapping PT parameters indicates a 8- to 11-km-thick Upper Palaeozoic–Jurassic accretionary complex overlying the Gemeric basement and its Permo-Triassic autochthonous cover.     

Argon isotope fractionation induced by stepwise heating

Noble gas isotopes are widely used to elucidate the history of the rocks in which they have been trapped, either from distinct reservoirs or by accumulation following radioactive decay. To extract noble gases from their host rocks, stepwise heating is the most commonly used technique to deconvolve isotopically different components, e.g., atmospheric, in situ radiogenic, or excess radiogenic from mantle or crustal reservoirs. The accurate determination of the isotopic composition of these different components is of crucial importance, e.g., for ages obtained by ⁴⁰Ar-³⁹Ar stepheating plateaus. However, diffusion theory-based model calculations predict that the stepwise thermal extraction process from mineral phases induces isotope fractionation and, hence, adulterates the original composition. Such effects are largely unconsidered, as they are small and a compelling experimental observation is lacking. We report the first unequivocal evidence for significant mass fractionation of argon isotopes during thermal extraction, observed on shungite, a carbon-rich Precambrian sedimentary rock. The degree of fractionation, as monitored by ³⁸Ar/³⁶Ar and ⁴⁰Ar/³⁶Ar ratios, very well agrees with theoretical predictions assuming an inverse square root dependence of diffusion coefficient and atomic mass, resulting in easier extraction of lighter isotopes. Hence, subatmospheric ⁴⁰Ar/³⁶Ar ratios obtained for argon extracted at low temperatures may not represent paleoatmospheric argon. Shungite argon resembles modern atmospheric composition, but constraints on the timing of trapping appear difficult to obtain, as shungites are multicomponent systems.In ⁴⁰Ar-³⁹Ar stepwise heating, the isotope fractionation effect could cause systematic underestimations of plateau ages, between 0.15 and 0.4% depending on age, or considerably higher if samples contain appreciable atmospheric Ar. The magnitude of this effect is similar to the presently achieved uncertainties of this increasingly precise dating technique. Our results also indicate the importance of thermally activated diffusion as a possible fractionation mechanism, e.g., for hydrothermal gas exhalations, or for carbonaceous carrier phases such as “Q” in meteorites that have been suggested as carriers of highly fractionated noble gas residues from the early solar nebula.     

Noble gas composition of the solar wind as collected by the Genesis mission

We present the elemental and isotopic composition of noble gases in the bulk solar wind collected by the NASA Genesis sample return mission. He, Ne, and Ar were analyzed in diamond-like carbon on a silicon substrate (DOS) and ^84,86Kr and ^129,132Xe in silicon targets by UV laser ablation noble gas mass spectrometry. Solar wind noble gases are quantitatively retained in DOS and with exception of He also in Si as shown by a stepwise heating experiment on a flown DOS target and analyses on other bulk solar wind collector materials. Solar wind data presented here are absolutely calibrated and the error of the standard gas composition is included in stated uncertainties. The isotopic composition of the light noble gases in the bulk solar wind is as follows: ³He/⁴He: (4.64 ± 0.09) × 10⁻⁴, ²⁰Ne/²²Ne: 13.78 ± 0.03, ²¹Ne/²²Ne: 0.0329 ± 0.0001, ³⁶Ar/³⁸Ar 5.47 ± 0.01. The elemental composition is: ⁴He/²⁰Ne: 656 ± 5, and ²⁰Ne/³⁶Ar 42.1 ± 0.3. Genesis provided the first Kr and Xe data on the contemporary bulk solar wind. The preliminary isotope and elemental composition is: ⁸⁶Kr/⁸⁴Kr: 0.302 ± 0.003, ¹²⁹Xe/¹³²Xe: 1.05 ± 0.02, ³⁶Ar/⁸⁴Kr 2390 ± 150, and ⁸⁴Kr/¹³²Xe 9.5 ± 1.0. The ³He/⁴He and the ⁴He/²⁰Ne ratios in the Genesis DOS target are the highest solar wind values measured in exposed natural and artificial targets. The isotopic composition of the other noble gases and the Kr/Xe ratio obtained in this work agree with data from lunar samples containing “young” (∼100 Ma) solar wind, indicating that solar wind composition has not changed within at least the last 100 Ma. Genesis could provide in many cases more precise data on solar wind composition than any previous experiment. Because of the controlled exposure conditions, Genesis data are also less prone to unrecognized systematic errors than, e.g., lunar sample analyses. The solar wind is the most authentic sample of the solar composition of noble gases, however, the derivation of solar noble gas abundances and isotopic composition using solar wind data requires a better understanding of fractionation processes acting upon solar wind formation.     

Redistribution of HFSE elements during rutile replacement by titanite

Titanite growth at the expense of rutile during retrograde hydration of eclogite into amphibolite is a common phenomenon. We investigated an amphibolite sample from the Tromsø eclogite facies terrain in Northern Norway to gain insight into the trace element distribution between rutile and titanite during incomplete resorption of the rutile by titanite. Patchy compositional zoning of Al, Ti, and F in titanite relates to the presence of a fluid with variable Ti/Al and/or F during its growth. Laser ablation ICP–MS and electron microprobe data for high field strength elements (HFSE: Nb, Zr, Ta, and Hf) of rutile resorbed by titanite indicate a pronounced enrichment of these elements in the rim of a large single rutile crystal (~8 mm) and a systematic decrease towards uniform HFSE contents in the large core. HFSE contents of smaller rutile grains (~0.5 mm) and rutile inclusions (<100 μm) in the titanite overgrowth are similar or higher than in the rims of large rutile crystals. Element profiles from the rim inward demonstrate that HFSE enrichment in rutile is controlled by diffusion. HFSE ratios in diffusion-altered rutile show systematic variations compared with the uniform core composition of the large rutile. Modelling of Zr and Nb diffusion in rutile indicates that diffusion coefficients in rutile in fluid-dominated natural systems must be considerably higher than those determined experimentally at 1 bar in dry systems. Variations of HFSE contents in the newly formed titanite show no systematic spatial distribution. HFSE ratios in titanite and the rims of rutile are different, indicating different solid/fluid distribution coefficients in these minerals. Element fractionation by diffusion into the relict rutile and during fluid-mediated growth of new titanite could substantially change the HFSE budget of these minerals and could affect their use for geochemical tracing and other applications, such as Zr-based geothermobarometry.     

Climatology of Ozone, PAN, CO, and NMHC in the Free Troposphere Over the Southern North Atlantic

Free tropospheric measurements of ozone, peroxyacetylnitrate andprecursors (CO, NMHC) that were made within the framework of the EUROTRACsub-project TOR (Tropospheric Ozone Research) between 1990 and 1995 at theGAW station Izana, Tenerife (28°18N, 16°30W) arediscussed. The average annual cycles reveal the importance of transport fromnorthern mid-latitudes and the role of photo-chemistry. According toair-mass trajectories, which were supplied to us from AEROCE(Atmosphere/Ocean Chemistry Experiment), transport from northernmid-latitudes is associated with high precursor concentrations in winter,whereas ozone concentrations in winter are not much influenced by transportpatterns, suggesting a rather uniform distribution over the northern part ofthe Northern Hemisphere around mean value of 43 ± 5 ppb. In summer,high ozone concentrations of up to 90 ppb are often encountered duringtransport from north, while the levels of precursors are much lower than inwinter, because of photochemical destruction. Trajectories from southerlylatitudes and the Sahara usually have the lowest ozone concentrationsassociated with them.     

A new extended Gibbs thermodynamic potential of seawater

A new and extended Gibbs thermodynamic potential function of seawater is proposed to overcome generally known weaknesses of the International Equation of State of Seawater 1980 and its associated formulas (EOS80). It is valid for applied pressures up to 100 MPa (10,000 dbar), temperatures from −2-40°C, and practical salinities up to 42. At ambient pressure, it is applicable in heat capacity and density up to salinity 50. It includes the triple point of water for reference and is, over its range of validity, fully consistent with the current 1995 international scientific pure water standard, IAPWS95. In conjunction with an improved Gibbs potential of ice, it provides freezing temperatures of seawater for pressures up to 50 MPa (5000 dbar). It is compiled from an extensive set of experimental seawater data, rather than being derived from EOS80 equations. Older seawater data were specifically recalibrated for compatibility with the recent pure water standard. By this procedure, experimental high-pressure densities proved consistent with sound speeds confirmed by deep-sea travel time measurements. Temperatures of maximum density are described within their experimental uncertainty. For very low salinities, Debye-Hückel limiting laws are recompiled using latest physical and chemical constants. The potential function is expressed in the 1990 International Temperature Scale ITS-90.     

The competing models for the origin and internal evolution of granitic pegmatites in the light of melt and fluid inclusion research

In this paper we discuss the main petrogenetic models for granitic pegmatites and how these models have evolved over time. We suggest that the present state of knowledge requires that some aspects of these models to be modified, or absorbed into newer ones. Pegmatite formation and internal evolution have long supposed the need for highly water- and flux-enriched magmas to explain the differences between pegmatites and other intrusives of similar major element composition. Compositions and textural characteristics of fluid and melt inclusions in pegmatite minerals provide strong evidence for such magmas. Furthermore, we show that melt inclusion research has increased the number of potential flux components, which may include H₂O, OH^?, CO₂, HCO ₃ ^? , CO ₃ ^2? , SO ₄ ^2? , PO ₄ ^3? , H₃BO₃, F , and Cl, as well as the elements Li, Na, K, Rb, Cs, and Be, herein described as melt structure modifiers. In this paper we emphasize that the combined effect which these components have on the properties of pegmatite melts is difficult to deduce from experimental studies using only a limited number of these components. The combination and the amount of the different magmatic species, together with differences in the source region, and variations in pressure and temperature cause the great diversity of the pegmatites observed. Some volatile species, such as CO ₃ ^2? and alkalis, have the capacity to increase the solubility of H₂O in silicate melt to an extraordinary degree, to the extent that melt-melt-fluid immiscibility becomes inevitable. It is our view that the formation of pegmatites is connected with the complex interplay of many factors.     

Spectrometric analyses in comparison to the physiological condition of heavy metal stressed floodplain vegetation in a standardised experiment

Floodplain ecosystems are affected by flood dynamics, nutrient supply as well as anthropogenic activities. Heavy metal pollution poses a serious environmental challenge. Pollution transfer from the soil to vegetation is still present at the central location of Elbe River, Germany. The goal of this study was to assess and separate the current heavy metal contamination of the floodplain ecosystem, using spectrometric field and laboratory measurements. A standardized pot experiment with floodplain vegetation in differently contaminated soils provided the basis for the measurements. The dominant plant types of the floodplains are: Urtica dioica, Phalaris arundinacea and Alopecurus pratensis, these were also chemically analysed. Various vegetation indices and methods were used to estimate the red edge position, to normalise the spectral curve of the vegetation and to investigate the potential of different methods for separating plant stress in floodplain vegetation. The main task was to compare spectral bands during phenological phases to find a method to detect heavy metal stress in plants. A multi-level algorithm for the curve parameterisation was developed. Chemo-analytical and ecophysiological parameters of plants were considered in the results and correlated with spectral data. The results of this study show the influence of heavy metals on the spectral characteristics of the focal plants. The developed method (depth CR1730) showed significant relationship between the plants and the contamination.