A shipborne- type wave-height meter for oceangoing vessels, using microwave Doppler radar

A wave-height meter using a simple microwave Doppler radar,simeq10mW in power and 10.525 GHz in frequency, is proposed so that we can measure oceanic waves effectively while the ship is steaming. It was first applied to the measurement of the variation of water level generated in a wave tank, which suggested that it is adequately applicable to the measurement of oceanic waves. A field test was carried out off the cape of Nojimazaki by installing the Doppler radar 5 m above the sea level at the bow of the ship. The result agreed reasonably well with that measured simultaneously by the ultrasonic wave-height meter installed at the same position. Another test is running successfully on a larger ship with the wave-height meter installed at 9 m above the sea level. The significant wave height measured by the present meter is being compared with that observed visually by the navigation officers.     

华北地台东部石炭系—二叠系优质煤储层形成分布控制因素

优质煤储层在此指厚度大、分布广、储集物性好的煤层。沉积相对优质煤储层的形成和分布有重要控制作用。通过浅海和泻湖淤积填平发育起来的潮坪环境和三角洲环境是最有利的优质煤储层形成环境,煤储层厚度大、分布广。沉积环境对煤储层中的灰分含量和镜质组含量有重要影响,而灰分含量和镜质组含量又直接影响煤储层的储集物性。灰分充填了煤储层中的孔隙,其含量越高,储集物性越差;镜质组有利于割理的形成,其含量越高,储集物性越好。由于在灰分含量、煤岩显微组分等方面的差异,潮坪环境沉积的煤储层的储集物性优于三角洲的煤储层,下三角洲平原沉积的煤储层优于上三角洲平原沉积的煤储层。海平面变化对优质煤储层的形成和分布也有重要控制作用。高位体系煤储层富集,单层厚度大,横向分布相当稳定,尤其是高位体系域晚期,是形成优质煤储层最有利的层位。而水进体系域煤储层稀少,单层厚度小,横向分布不稳定,不利于优质煤储层形成。     

Impact of mercury emissions from incineration of automobile shredder residue in Japan

Mercury emissions from the incineration of automobile shredder residues (ASRs) were investigated. Continuous monitoring of elemental and reactive gaseous Hg in flue gas was performed in lab-scale and plant-scale ASR incineration. Results of continuous monitoring agreed with those obtained using the JIS K0222 method and Ontario-Hydro method. Before cleaning by air pollutant control devices (APCDs), reactive Hg was the dominant form of that element in both lab-scale and plant-scale results. Emission factors of reactive Hg before APCDs estimated from monitoring results showed large differences between plant-scale and lab-scale emissions. The emission factor in the plant scale was more than 10 times larger than that in the lab-scale, which is explainable by the different Hg contents of ASR. Based on plant-scale monitoring at the stack, emission factors after APCDs were estimated as 0.79 mg-Hg/Mg-ASR for elemental Hg and 6.8 mg-Hg/Mg-ASR for reactive Hg. Using these emission factors, total Hg emissions from ASR incineration were estimated as 2.2 kg/a. An ASR incineration plant investigated in this study used highly effective APCDs. Consequently, these emission factors might result in underestimation of national Hg emissions from ASR incineration. Emission factors estimated from lab-scale monitoring at a fabric filter outlet side might be more appropriate. However, even if emission factors calculated from plant-scale or the lab-scale monitoring are used, estimated emissions are still less than 1.0% of total Hg emissions in Japan. Therefore, Hg emissions from ASR incineration can be evaluated as insignificant. Unless Hg contents of ASR increase extremely, ASR incineration would be a minor source of Hg atmospheric emission in Japan, even if all ASRs were incinerated.     

Tide-induced residual currents with Stokes and Ekman layers over an undulatory sea floor

Residual currents induced by the tidal current flowing over a rotating ridge, which is infinitely elongated in they-direction and the width of which is so large that the nonlinear effect is weak enough, have been analysed theoretically. The currents are restrained by Stokes and Ekman layers which are given through a constant viscosity. This study shows that the direction of the cross-isobath residual current just above the sea floor varies with the value off ^*(=Coriolis parameter/tide frequency), that the along-isobath residual current forms a clockwise circulation around the rotating ridge and that it is stronger asf ^* grows larger.     

Tide-induced vertical circulation in a bay with homogeneous water: Theory and experiment

The structure of the tidal residual current due to vertical viscosity is investigated both theoretically and experimentally. It is found that the interaction between the vertical component of the oscillatory current and vorticity,wT ₁ T ₁, induces a strong residual constituent outside the boundary layer and forms a circulation which is quite similar to gravitational circulation and that the vertical profile of the oscillatory current not only affects the magnitude of the residual constituent but also decides the direction of the circulation. In the hydraulic experiment, the residual constituent is larger than the theoretical prediction and a phase difference in the oscillatory constituent between the upper and lower layer is observed. The amplitude difference is caused by the strong nonlinear effect of the residual constituent and the phase difference is caused by the interaction between the residual current and the basic oscillatory current. The principal generating force of the residual constituent outside the boundary layer,wT ₁ T ₁, is observed in a bay where the tide is nearly a standing wave.     

Vertical structure of the tidal current ellipse in a rotating basin

Tidal current ellipses formed by the Coriolis effect are investigated theoretically, taking account of the effect of horizontal boundaries. This study reveals that even in a narrow bay, the tidal current ellipse appears in the inside of the bottom boundary layer, although the ellipticity cannot be recognized in the outside of the boundary layer. In a wide bay, the ellipticity is observed even in the outside and it is larger in the inside. The rotation direction of these ellipses is counterclockwise in the northern hemisphere. And also, the Coriolis force has an effect to deflect the major axis of the ellipse in the inside of the boundary layer. These nature of the tidal current ellipse is well explained by the consideration of the formation mechanism of the ellipse.     

Size distribution of colloidal trace metals and organic carbon during a coastal bloom in the Baltic Sea

The physico-chemical speciation of organic carbon and selected metals was measured during a coastal bloom in Ekhagen Bay, Baltic Sea, using ultrafiltration.One important objective with the study was to see if any depletion of trace metals could be measured in the directly bioavailable fraction (<1000 Da, the soluble low molecular weight fraction, LMW) during a plankton bloom. Filters with five different cut-offs were used (1 kD (1000 Da), 5 kD, 10 kD, 100 kD and 0.22 μm) in order to delineate the size distribution of colloidal organic carbon (COC) and trace metals.During the bloom in May, LMW Al, Co, Cu, Mn and Ni concentrations decreased although the colloidal and particulate concentrations were relatively high. Data show that desorption of colloidal and particulate bound trace metals to the LMW fraction was slower than the process depleting the LMW fraction.Estimates of the maximum active uptake of Cu, Ni and Mn by the phytoplankton, and the loss of non-bioactive Al from the LMW fraction, indicate that processes other than active uptake by phytoplankton must contribute to the observed depletion of trace metals in the LMW fraction. Hence, in order to estimate the bioavailable pool of trace metals for plankton during bloom conditions, these other processes must be understood and quantified.Transparent Exopolymeric Particles (TEP, reflecting sugar-rich phytoplankton exudates) increased around eight times during the plankton bloom. We hypothesize that the formation of TEP is a process that might be important for the transfer of trace metals from the LMW to the particulate fraction during the phytoplankton bloom, but the significance of TEP for this depletion in Baltic Sea surface water remains to be shown.     

Multi-proxy evidence of long-term changes in ecosystem structure in a Danish marine estuary, linked to increased nutrient loading

This paper presents a study of changes in eutrophication over the past 100 years in a fertile estuary. The Danish estuary Mariager Fjord is a long, narrow sill-fjord with a permanently anoxic basin. In 1997 anoxia spread from the basin to the entire inner estuary, killing almost all eukaryotes and prompting debate on the causes. This paper reports a multi-proxy survey of ²¹⁰Pb-dated sediment cores from the anoxic basin. Analyses of diatoms, dinoflagellates, pigments and geochemical proxies were used to determine changes in ecosystem structure over the past 100 years. The aim was to establish ‘base-line conditions’, for management purposes, of the biological structure prior to 1900, and to examine possible causes of changes observed. Geochemical proxies total nitrogen (TN), total carbon (TC) and biogenic silica (BSi) were consistently high throughout the sediment record. Increased concentrations of pigments and natural isotopes (δ¹³C, δ¹⁵N) suggested increasing production and nutrient loading. The main changes in the biological proxies occurred between 1915 and the 1940s, and indicated that the estuary has been somewhat eutrophic since 1900, but that the eutrophication process increased over the past 100 years. A reconstruction of TN concentration by a diatom-based transfer function supports this interpretation, with inferred TN ca. 1900 around 60 μmol l⁻¹, and an increase in TN concentration over the past century to ca. 130 μmol l⁻¹ by 1995. Inferred TN decreased to ca. 100 μmol l⁻¹ by 2001, similar to present day monitoring data.     

Effects of high-order nonlinear interactions on unidirectional wave trains

Numerical simulations of gravity waves with high-order nonlinearities in two-dimensional domain are performed by using the pseudo spectral method. High-order nonlinearities more than third order excite apparently chaotic evolutions of the Fourier energy in deep water random waves. The high-order nonlinearities increase kurtosis, wave height distribution and H_max/H_1/3 in deep water and decrease these wave statistics in shallow water. Moreover, they can generate a single extreme high wave with an outstanding crest height in deep water. High-order nonlinearities (more than third order) can be regarded as one cause of freak waves in deep water.     

Structure of Subsurface Intrusion of the Oyashio Water into the Kuroshio Extension and Formation Process of the North Pacific Intermediate Water

In order to understand the actual formation process of the North Pacific Intermediate Water (NPIW), structure of subsurface intrusions of the Oyashio water and the mixing of the Oyashio and the Kuroshio waters in and around the Kuroshio Extension (KE) were examined on the basis of a synoptic CTD observation carried out in May-June 1992. The fresh Oyashio water in the south of Hokkaido was transported into KE region through the Mixed Water Region (MWR) in the form of subsurface intrusions along two main paths. The one was along the east coast of northern Japan through the First Branch of the Oyashio (FBO) and the other along the eastern face of a warm streamer which connected KE with a warm core ring through the Second Branch of the Oyashio (SBO). The fresh Oyashio water extended southward through FBO strongly mixed with the saline NPIW transported by the Kuroshio in the south of Japan (old NPIW) in and around the warm streamer. On the other hand, the one through SBO well preserved its original properties and extended eastward beyond 150°E along KE with a form of rather narrow band. The intrusion ejected Oyashio water lens with a diameter of 50–60 km southward across KE axis and split northward into the MWR involved in the interaction of KE and a warm core ring, which were supposed to be primary processes of new NPIW formation.