Effects of changes in canopy interception on stream runoff response and recovery following clear-cutting of a Japanese coniferous forest in Fukuroyamasawa Experimental Watershed in Japan

Understanding changes in evapotranspiration during forest regrowth is essential to predict changes of stream runoff and recovery after forest cutting. Canopy interception (Ic) is an important component of evapotranspiration, however Ic changes and the impact on stream runoff during regrowth after cutting remains unclear due to limited observations. The objective of this study was to examine the effects of Ic changes on long-term stream runoff in a regrowth Japanese cedar and Japanese cypress forest following clear-cutting. This study was conducted in two 1-ha paired headwater catchments at Fukuroyamasawa Experimental Watershed in Japan. The catchments were 100% covered by Japanese coniferous plantation forest, one of which was 100% clear-cut in 1999 when the forest was 70 years old. In the treated catchment, annual runoff increased by 301 mm/year (14% of precipitation) the year following clear-cutting, and remained 185 mm/year (7.9% of precipitation) higher in the young regrowth forest for 12–14 years compared to the estimated runoff assuming no clear-cutting. The Ic change was −358 mm/year (17% of precipitation) after cutting and was −168 mm/year (6.7% of precipitation) in the 12–14 years old regrowth forest compared to the observed Ic during the pre-cutting period. Stream runoff increased in all seasons, and the Ic change was the main fraction of evapotranspiration change in all seasons throughout the observation period. These results suggest that the change in Ic accounted for most of the runoff response following forest cutting and the subsequent runoff recovery in this coniferous forest.     

Stress Sharing Behavior and Its Mechanism during Consolidation Process in Composite Ground Improved by Sand Compaction Piles with Low Replacement Area Ratio

In order to accurately design a sand compaction pile (SCP) with low replacement area ratio, it is important to understand the mechanical interaction between the sand pile and clay ground and its mechanism during consolidation process in composite ground. In this article, therefore, a series of numerical analyses on composite ground improved by SCP with low replacement area ratio were carried out. The applicability of numerical analyses, in which an elasto-viscoplastic consolidation finite element method was applied, were confirmed by comparing the results obtained from a series of laboratory model tests with the composite ground improved by SCP. Through the results of the numerical analyses, mechanical behavior of the sand pile and clay in composite ground during consolidation is elucidated, together with a stress sharing mechanism between sand pile and clay.     

Particulate peptidoglycan in seawater determined by the silkworm larvae plasma (SLP) assay

Peptidoglycan (PG) is a biopolymer found exclusively in the cell wall of bacteria. Recent chemical analysis of particulate organic matter suggests that a major amount of the muramic acid, an amino sugar present only in PG, could not be accounted for in terms of bacterial cells (Benner and Kaiser, 2003); however, data on particulate PG is quite sparse. In the present study, conducted in 1996, the PG was examined at 5 sampling sites in the northwestern Pacific Ocean, and in natural seawater cultures. Particulate PG, which was concentrated using a 96-well filtration plate equipped with Durapore filters (pore size, 0.22 μm), was measured by the silkworm larvae plasma (SLP) assay. The PG concentration generally decreased with depth and correlated significantly with bacterial abundance throughout the entire water column. However, the ratio of particulate PG to bacterial abundance varied with depth. The average ratio was 0.61 ± 0.53 (average ± SD, n = 40) between 50 and 2000 m, which agreed with the bacterial cellular PG content from 0.63 to 1.1 fg cell⁻¹ obtained in seawater cultures. On the other hand, the ratios of PG to bacteria from the surface to 50 m (3.7 ± 2.6, n = 29) and below 2,000 m (2.1 ± 1.7, n = 7) were significantly higher than that between 50 and 2,000 m. These results may suggest that, in the surface and deep layers, a significant fraction of particulate PG was present in bacterial detritus, whereas this fraction was reduced in the middle layer.     

Numerical study of the summer temperature decrease induced by the enhancement of estuarine circulation in Fukuoka Bay

The Princeton Ocean Model with realistic bottom topography has been used to investigate the summer temperature decrease in the past 25 years in Fukuoka Bay. The vertical mixing of the model is expressed by a scheme that effectively includes the influences of interannual variations of tidal currents and wind. The results show that the historical temperature decrease in summer has been caused by tidal currents and wind weakening in the past 25 years in Fukuoka Bay. The weakening of tidal currents and wind gives rise to weakening of the vertical mixing, and to enhancement of the estuarine circulation in the bay. The enhancement of the estuarine circulation activates the inflow of open-ocean water toward Fukuoka Bay. Coastal water in summer has therefore tended to be colder and more saline in the past 25 years. This interannual variation in coastal waters is called “open-oceanization” in this study. On the basis of the numerical model, it is anticipated that the temperature will decrease by 0.2°C in the next 25 years in Fukuoka Bay if the tide and wind weaken persistently as in the present bay.     

Application of Atomic Force Microscopy to Observation of Marine Bacteria

The atomic force microscopy (AFM) is a recently developed, bench-top instrument that can image the surface structures of biological specimens at high resolution with simultaneous measurement of their size. This paper describes the application of AFM to marine bacteria. Both natural and cultured bacteria were retained on a filter or placed on glass, washed, air-dried and observed by AFM. The instrumental condition, the choice of suitable filter, effect of fixation and filtration, comparison with epifluorescent microscopic (EFM) count, and the size and shape of bacterial cells were investigated. An Isopore filter was best for concentration and subsequent observation because of its surface flatness. Cross section images showed that both rod and coccoid cells were flattened, the former usually having a two-humped shape. Bacterial cells were differentiated from non-living particles based on their cross section shape and size. Bacterial counts by AFM and EFM showed good agreement. Although size measurement is easily done by the instrument, AFM tends to overestimate the size of microspheres. More work is thus needed on the size measurement of living organisms. Because AFM easily provides images of natural bacterial cells at high magnification, it can be used as a new tool to study the fine structures of marine bacteria. This revised version was published online in July 2006 with corrections to the Cover Date.     

Use of an optical oxygen sensor to measure dissolved oxygen in seawater

The use of an optical oxygen sensor to measure dissolved oxygen in seawater was investigated. The sensor is based on the dynamic quenching of an oxygen-sensitive fluorochrome embedded in the tip. Dissolved oxygen in seawater samples collected from eight stations at depths ranging from 3000 to 6000 m was analyzed both with the optical sensor and by the Winkler titration method. The two sets of data did not differ significantly. The stability and simplicity of the method and the good agreement of the results with those of the titration method indicate that the sensor would be useful for fieldwork.     

Aspherical correction for free vibration of elastically anisotropic solid by means of theXYZ algorithm

By applying the perturbation theory to theXYZ algorithm (a kind of variational method), the difference f in free vibration frequencies between sphere and ellipsoid was approximated as , where i and _i (i = x,y andz) (i=x, y andz) are aspherical coefficients and asphericities of the ellipsoid, respectively. We developed an analytic method to compute the aspherical coefficients719-4 by using theXYZ algorithm. A numerical example was given for an ellipsoidal olivine, and an attempt was made to estimate the asphericities of the specimen by a least-squares method, based on the relationship between frequency shift and asphericity.     

Ecologic and taxonomic diversification in the Mesozoic brackish-water bivalve faunas in Japan, with emphasis on infaunalization of heterodonts

Mesozoic brackish-water bivalve faunas in Japan diversified in three steps: at the beginning of the Early Jurassic, Early and Late Cretaceous. The Hettangian Niranohama Fauna in northeastern Honshu represents the establishment of a heterodont-dominated brackish-water fauna that persisted until the early Late Cretaceous. No similar composition is known from the Triassic. The infauna consists mostly of non-siphonate and some short-siphonate heterodonts, while the epifauna is represented by diverse pteriomorphian families. In the Early Cretaceous Tetori Group in central Honshu, the long-siphonate heterodonts Tetoria (Corbiculidae) and the semi-infaunal soft-bottom oyster Crassostrea appeared. The evolutionary diversification of the latter, known as the most important element of modern brackish-water faunas, may thus originate at that time. In the early Late Cretaceous (Cenomanian) of the Goshoura and Mifune Groups in west Kyushu, several euryhaline deep-burrowing heterodont families, such as Veneridae and Tellinidae, further diversified in the brackish and marine environments. The Late Cretaceous is characterized by massive shell biolithic beds in which large Crassostrea species are common, a feature common for Cenozoic brackish-water faunas. The long-term changes in the composition of the brackish-water faunas in Japan represents thus an evolutionary record, irrespective of the severe physiological and environmental conditions imposed on the highly conservative nature of the fauna.     

Jurassic Dextral and Cretaceous Sinistral Movements Along the Hida Marginal Belt

The Hida marginal belt (HMB), which consists of various kinds of fault-bound blocks, is located between the continental massif of the Hida belt and the Mesozoic accretionary complex of the Mino belt in Central Japan. Detailed field investigation reveals that the HMB had grown through the two different movements, i.e., Jurassic dextral and Cretaceous sinistral movements. The Jurassic dextral ductile shear zones run in the southern marginal part of the Hida belt and the northern part of the HMB, whereas the Cretaceous sinistral cataclastic shear zones occur in the southern part of the HMB and the northern marginal part of the Mino belt. Geologic map and field evidence seem to suggest that the Jurassic dextral movement form the fault-bound blocks of the HMB to form the basic structure of the Hida marginal belt, i.e., formation of the ‘proto-HMB.’ Following the dextral movement, the sinistral one restructured the ‘proto-HMB’ to complete the present feature of the Hida marginal belt. The Cretaceous sinistral movement might result in the sinistral collision between the proto-HMB and the Mino belt.