Origin and evolution of the Steamboat Springs siliceous sinter deposit, Nevada, U.S.A.

Siliceous hot spring deposits from Steamboat Springs, Nevada, U.S.A., record a complex interplay of multiple, changing, primary environmental conditions, fluid overprinting and diagenesis. Consequently these deposits reflect dynamic geologic and geothermal processes. Two surface sinters were examined—the high terrace, and the distal apron-slope, as well as 13.11 m (43 ft) of core material from drill hole SNLG 87-29. The high terrace sinter consists of vitreous and massive-mottled silica horizons, while the distal deposit and core comprise dominantly porous, indurated fragmental sinters. Collectively, the three sinter deposits archive a complete sequence of silica phase diagenetic minerals from opal-A to quartz. X-ray powder diffraction analyses and infrared spectroscopy of the sinters indicate that the distal apron-slope consists of opal-A and opal-A/CT mineralogy; the core yielded opal-A/CT and opal-CT with minor opal-A; and the high terrace constitutes opal-C, moganite, and quartz. Mineralogical maturation of the deposit produced alternating nano–micro–nano-sized silica particle changes. Based on filament diameters of microbial fossils preserved within the sinter, discharging thermal outflows fluctuated between low-temperatures (< 35 °C, coarse filaments) and mid-temperatures ( 35–60 °C, fine filaments). Despite transformation to quartz, primary coarse and fine filaments were preserved in the high terrace sinter. AMS ¹⁴C dating of pollen from three horizons within core SNLG 87-29, from depths of 8.13 to 8.21 m (26′8″ to 26′11″), 10.13 to 10.21 m (33′3″ to 33′6″), and 14.81 to 14.88 m (48′7″ to 48′10″), yielded dates of 8684 ± 64 years, 11,493 ± 70 years and 6283 ±60 years, respectively. In the upper section of the core, the stratigraphically out-of-sequence age likely reflects physical mixing of younger sinter with quartzose sinter fragments derived from the high terrace. Within single horizons, mineralogical and morphological components of the sinter matrix were spatially patchy. Overall, the deposit was modified by sub-surface flow of alkali-chloride thermal fluids depositing a second generation of silica, and periodically, by acidic steam condensate formed during periods when the water table was low. Local faulting produced considerable fracturing of the sinter. Hence, the Steamboat Springs sinter experienced a complex history of primary and secondary hydrothermal, geologic and diagenetic events, and their inter-relationships and effects are locked within the physical, chemical and biological signatures of the deposit.     

Diatom-inferred depth models in 8 Canadian boreal lakes: inferred changes in the benthic:planktonic depth boundary and implications for assessment of past droughts

Assessment of past drought in boreal regions, a region predicted to be strongly affected by climate warming, can provide insights into future availability of water. However, limited instrumental data and paleoclimatic data are available for this assessment. To address this lack of data in the boreal region of northwest Ontario, a regional study of lakes in the Winnipeg River Drainage Basin was initiated. Diatom-inferred (D-I) depth models were developed based on surface samples collected along a depth gradient within 8 small boreal lakes. Weighted-averaging and modern analog approaches provided robust within-lake depth models for each of the study lakes, with bootstrapped r² values ranging from 0.90 to 0.98, and root-mean-squared-errors of prediction (RMSEP) between 1.1 and 2.5 m. Large differences in the estimated depth optima for three representative, but common diatom species across our 8 study lakes suggested that within-lake calibration datasets are more appropriate for inferring past drought based in depth models than a regional multi-lake calibration dataset, and that light and related variables are controlling factors governing the maximum depth of benthic taxa. A down-core application of the D-I depth models on a near-shore core from Meekin Lake, retrieved near the present-day ecotone between the benthic and planktonic diatom assemblages indicated highly similar trends in inferred depth (r = 0.96). The models have significant correlations with other metrics of changes in depth including diatom species richness (r = 0.74–0.78) and evenness (r = 0.76–0.8), thereby allowing a check on the strength and direction of the depth inferences down-core. Near-shore cores located near the benthic:planktonic transition is a sensitive region that can provide estimates of past droughts in lakes where such inferences have been difficult to estimate.     

Use of cartographic images by expert and novice field geologists in planning fieldwork routes

Topographic maps and aerial photographs are particularly useful when geoscientists are faced with fieldwork tasks such as selecting paths for observation, establishing sampling schemes, or defining field regions. These types of images are crucial in bedrock geologic mapping, a cognitively complex field-based problem-solving task. Geologic mapping requires the geologist to correctly identify rock types and three-dimensional bedrock structures from often partial or poor-quality outcrop data while navigating through unfamiliar terrain. This paper compares the walked routes of novice to expert geologists working in the field (n = 66) with the results of a route planning and navigation survey of a similar population of geologists (n = 77). Results show clearly that those geologists with previous mapping experience make quick and decisive determinations about field areas from available imagery and maps, regardless of whether they are or not physically present in the field area. Recognition of geologic features enabled experts to form and verbalize a specific plan for travel through a landscape based on those features. Novices were less likely to develop specific travel route plans and were less likely to identify critical landscape cues from aerial photographs.     

Sr-Isotope record of Quaternary marine terraces on the California coast and off Hawaii

Strontium-isotopic ratios of dated corals have been obtained from submerged reefs formed during Quaternary glacial periods off the Hawaiian islands. These data, combined with data from deep-sea sediments, tightly constrain the secular variation of marine ⁸⁷Sr/⁸⁶Sr for the past 800,000 yr. Although long-term trends are apparent, no significant (>0.02‰), rapid (<100,000 yr) excursions in ⁸⁷Sr/⁸⁶Sr were resolved nor did we observe any samples with ⁸⁷Sr/⁸⁶Sr greater than that of modern seawater. Strontium in mollusks from elevated marine terraces formed during interglacial periods on the southern California coast show resolvable and consistent variations in ⁸⁷Sr/⁸⁶Sr which, when compared to the trend of Quaternary marine ⁸⁷Sr/⁸⁶Sr, can be used to infer uplift rates and define approximate ages for the higher terraces. The Sr-isotope age estimates indicate that uplift rates vary among crustal blocks and were not necessarily constant with time. No contrast in Sr-isotopic ratios between similar-age Hawaiian and California fossils was observed, confirming that any change in marine ⁸⁷Sr/⁸⁶Sr from glacial to interglacial periods must be small. A realistic appraisal of the potential of Sr-isotope stratigraphy for chronometric applications in the Quaternary suggests that the technique will be limited to relatively coarse distinctions in age.     

Quantitative evaluation of the biostratigraphic distribution of acanthomorphic acritarchs in the Ediacaran Doushantuo Formation in the Yangtze Gorges area, South China

Doushantuo acanthomorphic acritarchs are large morphologically complex organic-walled microfossils broadly constrained between the 635 Ma Nantuo glaciation and the 551 Ma Miaohe Biota. They are potential biostratigraphic tools for subdivision and correlation of the Ediacaran System in South China. However, major variations in sedimentary facies and stratigraphic thickness present challenges in understanding the spatial and temporal distribution of these acritarchs. Further, the distribution of acritarchs in the Doushantuo Formation is associated with the presence of early diagenetic chert and phosphate, implying a certain degree of preservational bias and/or environmental control. The purpose of this paper is to document the stratigraphic distribution of Doushantuo acritarchs and to quantitatively evaluate their biostratigraphic significance and possible taphonomic–environmental biases, based on high-resolution paleontological data from six sections over 100 km in the Yangtze Gorges area, South China.A total of 1082 acritarch fossils were recorded from 84 chert horizons in the six sections of the study area. These chert horizons are not uniformly distributed throughout the Doushantuo Formation, thus the presence/absence of early diagenetic chert does play a role in controlling the distribution of acritarchs. The sampled chert horizons can be grouped into two stratigraphic intervals in the lower and upper Doushantuo Formation, respectively, based on regional stratigraphic correlation. Quantitative analysis shows that the two intervals are distinct taxonomically and largely independent of taphonomic or facies controls. Thus, the two intervals can be regarded as assemblage biozones. The lower biozone (biozone 1) is numerically dominated by Tianzhushania spinosa (n = 587; 68.3%) and Meghystrichosphaeridium magnificum (n = 74; 8.6%), whereas the upper biozone (biozone 2) is dominated by Ericiasphaera rigida (n = 104; 47.1%) and Tianzhushania spinosa (n = 34; 14.1%). The three most common genera, Meghystrichosphaeridium, Tianzhushania, and Ericiasphaera, have been identified in all sections. Correspondence analysis (CA), detrended correspondence analysis (DCA), discriminant analysis (DA), and pairwise comparisons of samples (Spearman rank coefficient and Jaccard–Chao index), all consistently support biostratigraphic zonations. Thus, the distribution of the Doushantuo acanthomorphs is primarily controlled by biostratigraphic position of samples, with facies and taphonomic differences playing a secondary role. Our case study suggests that acanthomorphic acritarchs can offer a viable tool for regional correlation of the Ediacaran System.     

Genetic differentiation of three key anadromous fish populations of the Hudson River

Large, recreationally or commercially important populations of Atlantic sturgeon (Acipenser oxyrinchus), American shad (Alosa sapidissima), and striped bass (Morone saxatilis) occur in the Hudson River. Members of the Hudson River populations of these fishes also occur over a broad range along the Atlantic coast where they mix with conspecifics from other anadromous populations. For management purposes, it is imperative to be able to discriminate among individual stocks so that weak stocks may be protected and harvest may be allocated equitably. Because of their sensitivity and resistance to environmentally-induced temporal variation, molecular approaches have been increasingly employed in stock identification studies. However, post-Pleistocene recolonization of the Hudson River must have occurred less than 10,000 years ago—a relatively brief period for genetic divergence among populations. We tested whether various measures of DNA variation between Hudson River populations and adjacent populations of Atlantic sturgeon, American shad, and striped bass were sufficient to discriminate among their conspecific populations. American shad populations surveyed for mtDNA variation were highly diverse genotypically, but genotypic frequencies among the populations of the Connecticut, Hudson, and Delaware rivers were statistically homogenous (p>0.05). In contrast, Atlantic sturgeon (surveyed for mtDNA variation) and striped bass (surveyed for mtDNA and nuclear DNA variation) populations of the Hudson River were not genotypically diverse, but they were differentiated from northern and southern populations. Our results suggest higher gene flow (and lesser homing fidelity) among American shad populations in comparison with the two other species.     

Photonic dating of prehistoric irrigation canals at Phoenix,Arizona, U.S.A.*

A number of archeological features, including in‐filled irrigation canals of uncertain prehistoric age, occur within the Holocene floodplain of the Salt River at Phoenix, Arizona. In the first attempt to date irrigation‐canal sediments using luminescence methods, we obtained age estimates of 1640 ± 190 yr B.P. (1σ) (multi‐aliquot or MA) and 1621 ± 95 yr B.P. (post‐IR single‐aliquot‐regenerative‐dose or SAR) for a single sample from the base of the oldest canal‐infilling deposits (all IR‐PSL ages reported in this article are in calendar years before A.D. 2001). For the remaining canal samples, weighted mean luminescence ages of 819 ± 45 yr (MA) and 826 ± 32 yr (post‐IR SAR) were obtained. Thus from photonic dating we can resolve the first and last phases of canal use at this Phoenix site: initiation at ca. 1600 years ago and final use at ca. 800 years ago. These results demonstrate the power of SAR luminescence sediment dating to enhance our understanding of prehistoric irrigation‐canal development and usage here and elsewhere in the world. © 2004 Wiley Periodicals, Inc.     

Analytic Element Modeling of Steady Interface Flow in Multilayer Aquifers Using AnAqSim

This paper presents the analytic element modeling approach implemented in the software AnAqSim for simulating steady groundwater flow with a sharp fresh‐salt interface in multilayer (three‐dimensional) aquifer systems. Compared with numerical methods for variable‐density interface modeling, this approach allows quick model construction and can yield useful guidance about the three‐dimensional configuration of an interface even at a large scale. The approach employs subdomains and multiple layers as outlined by Fitts (2010) with the addition of discharge potentials for shallow interface flow (Strack 1989). The following simplifying assumptions are made: steady flow, a sharp interface between fresh‐ and salt water, static salt water, and no resistance to vertical flow and hydrostatic heads within each fresh water layer. A key component of this approach is a transition to a thin fixed minimum fresh water thickness mode when the fresh water thickness approaches zero. This allows the solution to converge and determine the steady interface position without a long transient simulation. The approach is checked against the widely used numerical codes SEAWAT and SWI/MODFLOW and a hypothetical application of the method to a coastal wellfield is presented.