P–T–t paths and post-metamorphic exhumation of the Day Nui Con Voi shear zone in Vietnam

The Day Nui Con Voi belt in Vietnam is the southeasternmost part of the Red River shear zone in Asia. It is a narrow high-grade metamorphic core complex consisting of garnet–sillimanite–biotite gneisses, mylonite bands, amphibolite layers and migmatites. Geothermobarometric study of the complex revealed that the peak metamorphism took place under amphibolite-facies conditions of 690₋₆₀⁺³⁰°C and 0.65±0.15 GPa and the subsequent mylonitization occurred under greenschist-facies conditions of 480°C and under 0.3 GPa. Fifteen synkinematic hornblende and biotite separates from gneisses, amphibolites and mylonites were dated with the K/Ar method. Hornblende separates from the Day Nui Con Voi give K–Ar ages of 26.4–28.5 Ma, and the biotite separates do give 24.5–24.7 Ma. Combination of thermobarometric and geochronological data yields the cooling history of 500°C at 28 Ma and 300°C at 24 Ma with a cooling rate of 70–110°C Ma⁻¹, and 23 km post-metamorphic exhumation of the core complex. The first 16 km exhumation from the peak of metamorphism (at probably 31 Ma) to 28 Ma was triggered by the left-lateral strike-slip displacement of the Red River shear zone.     

Limitations of the Korean conventional fisheries management regime and expanding Korean TAC system toward output control systems

In this paper, we focus on the status and trends of the current Korean fisheries management regime. Specifically, this paper briefly introduces the Korean conventional fisheries management regime (KCFMR) and discusses its problems and limitations. In describing policy evolution, this paper finds reasons why the Korean government has chosen a TAC system, an output control approach, besides input control approaches in force for almost a century. This paper also describes the evolution of the Korean TAC system, which is carrying out a pivotal role in Korean fisheries development, and analyzes problems of the Korean TAC system. Finally, this paper gives a perspective on expanding the Korean TAC system toward Output Control Systems (OCSs) such as Individual Quotas (IQs), Individual Vessel Quotas (IVQs), Individual Transferable Traps (ITTs), Community Quotas (CQs), and Individual Transferable Quotas (ITQs).     

Graded-Density Reservoirs for Accessing High Stress Low Temperature Material States

In recently developed laser-driven shockless compression experiments an ablatively driven shock in a primary target is transformed into a ramp compression wave in a secondary target via unloading followed by stagnation across an intermediate vacuum gap. Current limitations on the achievable peak longitudinal stresses are limited by the ability of shaping the temporal profile of the ramp compression pulse. We report on new techniques using graded density reservoirs for shaping the loading profile and extending these techniques to high peak pressures.     

Three-dimensional topography corrections of magnetotelluric data

Topographic effects due to irregular surface terrain may prevent accurate interpretation of magnetotelluric (MT) data. Three-dimensional (3-D) topographic effects have been investigated for a trapezoidal hill model using an edge finite-element method. The 3-D topography generates significant MT anomalies, and has both galvanic and inductive effects in any polarization. This paper presents two different correction algorithms, which are applied to the impedance tensor and to both electric and magnetic fields, respectively, to reduce topographic effects on MT data. The correction procedures using a homogeneous background resistivity derived from a simple averaging method effectively decrease distortions caused by surface topography, and improve the quality of subsurface interpretation. Nonlinear least-squares inversion of topography-corrected data successfully recovers most of structures including a conductive or resistive dyke.     

Hydrometallurgical processing and recovery of molybdenum trioxide from spent catalyst

Hydrometallurgical processing of spent hydrodesulphurisation (HDS) catalyst for the recovery of molybdenum using sodium carbonate and hydrogen peroxide mixtures was investigated. The results indicated that the recovery of molybdenum was largely dependent on the concentrations of Na₂CO₃ and H₂O₂ in the reaction medium, which controls the acidity of the leach liquor and carry over of impurities such as Al, Ni, P, Si and V. Leaching process was exothermic and leaching efficiency of molybdenum decreased with increasing solid to liquid ratio. Large scale leaching of spent catalyst, under optimum conditions: 20% pulp density, 85 g/L Na₂CO₃, 10 vol.% H₂O₂ and 1 h reaction, resulted a leaching efficiency of 84% Mo. The obtained leach liquor contained (g/L): Mo — 22.0, Ni — 0.015 and Al — 0.82, P — 1.1, Si — 0.094 and minor quantities of V — 8 mg/L, As and Co — < 1 mg/L. Recovery of Mo from leach solution as MoO₃ of 97.30% purity was achieved by ammonium molybdate precipitation method.     

An experiment on reservoir representation schemes to improve hydrologic prediction: coupling the national water model with the HEC-ResSim

ABSTRACT

This study experiments with reservoir representation schemes to improve the ability to model active water management in the National Water Model (NWM). For this purpose, we developed an integrated water management model, NWM-ResSim, by coupling the NWM with HEC-ResSim, and two reservoir representation schemes are tested: simulation of reservoir operations and retrieval of scheduled operations. The experiments focus on a pilot reservoir domain in the Russian River basin – Lake Mendocino, California – and its contributing watershed. The evaluation results suggest that the NWM-ResSim improves the simulation performance of reservoir outflow from this managed reservoir over the NWM default level pool routing scheme. The degree of this improvement depends on the suitability of the operation guidance; the reservoir operations simulation scheme could have acceptable errors for the purposes of water resources management, but not for flood operations. Results of the retrieval scheme of scheduled operations demonstrated better performance for sub-daily flood operations.     

A nearly analytic symplectic partitioned Runge–Kutta method based on a locally one-dimensional technique for solving two-dimensional acoustic wave equations

In this paper, we develop a new nearly analytic symplectic partitioned Runge–Kutta method based on locally one-dimensional technique for numerically solving two-dimensional acoustic wave equations. We first split two-dimensional acoustic wave equation into the local one-dimensional equations and transform each of the split equations into a Hamiltonian system. Then, we use both a nearly analytic discrete operator and a central difference operator to approximate the high-order spatial differential operators, which implies the symmetry of the discretized spatial differential operators, and we employ the partitioned second-order symplectic Runge–Kutta method to numerically solve the resulted semi-discrete Hamiltonian ordinary differential equations, which results in fully discretized scheme is symplectic unlike conventional nearly analytic symplectic partitioned Runge–Kutta methods. Theoretical analyses show that the nearly analytic symplectic partitioned Runge–Kutta method based on locally one-dimensional technique exhibits great higher stability limits and less numerical dispersion than the nearly analytic symplectic partitioned Runge–Kutta method. Numerical experiments are conducted to verify advantages of the nearly analytic symplectic partitioned Runge–Kutta method based on locally one-dimensional technique, such as their computational efficiency, stability, numerical dispersion and long-term calculation capability.     

Wave velocities and attenuation of shaley sandstones as a function of pore pressure and partial saturation

We obtain the wave velocities and quality factors of clay‐bearing sandstones as a function of pore pressure, frequency and partial saturation. The model is based on a Biot‐type three‐phase theory that considers the coexistence of two solids (sand grains and clay particles) and a fluid mixture. Additional attenuation is described with the constant‐Q model and viscodynamic functions to model the high‐frequency behaviour. We apply a uniform gas/fluid mixing law that satisfies the Wood and Voigt averages at low and high frequencies, respectively. Pressure effects are accounted for by using an effective stress law. By fitting a permeability model of the Kozeny– Carman type to core data, the model is able to predict wave velocity and attenuation from seismic to ultrasonic frequencies, including the effects of partial saturation. Testing of the model with laboratory data shows good agreement between predictions and measurements.     

Availability of coastal groundwater discharge as an alternative water resource in a large-scale reclaimed land,Korea

This study was conducted to identify the availability of coastal groundwater discharge (CGD), subsurface fluids flowing from inland through the coastal area to sea, as an alternative water resource for a large-scale reclaimed land. The behaviors of stable isotopes indicated that groundwater originated from inland precipitation and traveled as CGD along the coast line. Most of the groundwater samples collected from domestic wells installed along the old coast line were considered to be relatively fresh from the correlation analysis among chemical constituents. The average electrical conductivity (EC) values of the samples were identified as averaging 1,125–1,297 μS cm^?1, corresponding to appropriate crop growth. A weathered-rock layer in a small catchment within the reclaimed land was proved to be a main CGD pathway, with electrical resistivity anomalies ranging from 7 to 14 Ω m. Five monitoring wells were placed in this catchment to delineate the occurrence of CGD. Long-term vertical EC profiling results for the monitoring wells indicated that CGD occurs within a depth of 30 m below the ground surface. Annual monitoring data for groundwater level and EC demonstrated that the water quality of CGD was improved by introducing fresh terrestrial groundwater. A remarkable improvement in water quality (EC decrease of 900–1,600 μS cm^?1) of CGD was observed during the saline water pumping test that explains how CGD could be an alternative water resource for the reclaimed land.