Some stability properties of large-scale baroclinic flows with nonlinear zonal current profile

The stability properties of a baroclinic zonal current with nonlinear velocity profile are investigated. The integral method is applied to the governing eigenvalue equation having the vertical velocity as the dependent variable. Expressed in terms of the Rossby number and the Richardson number, stability criteria, unstable regions in the complexc plane, and the upper bound of the unstable wave growth rate are found. Some differences in the results are noted between the present model and the quasi-geostrophic streamfunction model, particularly in connection with the effect of the velocity profile curvature termU _zz . It is conjectured in the present model that, depending on extreme behaviors ofU _zz , the propagation speed of unstable waves can be greater thanU _max or smaller thanU _min .     

Bacterioplankton growth and production at the Louisiana hydrocarbon seeps

The growth rate and potential production of bacterioplankton in cold hydrocarbon seeps located along the Louisiana coast were determined using a pulse-labeling technique. Surprisingly, community doubling times are on the order of 1.1 h, which compares to laboratory-grown cultures. We also found that there are differences in growth rates on relatively small geographic scales, suggesting the influence of site-specific geological features (e.g., gas hydrate mounds). Proceeding downslope to deeper waters, methane-oxidizing bacteria appeared to play a more significant role in community productivity. These preliminary experiments indicated, quite unexpectedly, that water column microbes are growing at a more rapid rate than in any other marine system so far studied and that methane may serve as a primary nutrient (carbon) source in these seep-associated microbial assemblages.     

Application of 2D numerical model to unsteady performance evaluation of vertical-axis tidal current turbine

Tidal current energy is renewable and sustainable, which is a promising alternative energy resource for the future electricity supply. The straight-bladed vertical-axis turbine is regarded as a useful tool to capture the tidal current energy especially under low-speed conditions. A 2D unsteady numerical model based on Ansys-Fluent 12.0 is established to conduct the numerical simulation, which is validated by the corresponding experimental data. For the unsteady calculations, the SST model, 2×10~5 and 0.01 s are selected as the proper turbulence model, mesh number, and time step, respectively. Detailed contours of the velocity distributions around the rotor blade foils have been provided for a flow field analysis. The tip speed ratio(TSR) determines the azimuth angle of the appearance of the torque peak, which occurs once for a blade in a single revolution. It is also found that simply increasing the incident flow velocity could not improve the turbine performance accordingly. The peaks of the averaged power and torque coefficients appear at TSRs of 2.1 and 1.8, respectively. Furthermore, several shapes of the duct augmentation are proposed to improve the turbine performance by contracting the flow path gradually from the open mouth of the duct to the rotor. The duct augmentation can significantly enhance the power and torque output. Furthermore, the elliptic shape enables the best performance of the turbine. The numerical results prove the capability of the present 2D model for the unsteady hydrodynamics and an operating performance analysis of the vertical tidal stream turbine.     

Simultaneous stabilization of arsenic, lead, and copper in contaminated soil using mixed waste resources

In the present study, stabilization treatment using waste resource stabilizers was performed for soil contaminated with As and heavy metals (Pb and Cu). Calcined oyster shell (COS) and coal mine drainage sludge (CMDS) were used as a mixed stabilizing agent for a wet-curing duration of 28 days. After the stabilization treatment, the treatment process efficiency was evaluated by the results of various batch- and column-leaching tests. Neutral and weak acid extraction methods, such as water-soluble extraction and SPLP, did not exhibit satisfactory results for heavy metal stabilization, even if they showed very low leachability. On the other hand, TCLP and 0.1 M HCl extraction showed that the stabilizers significantly reduced the amount of heavy metals leached from the soil, which strongly supports the thesis that the stabilization treatment is efficient in the acidic leaching conditions that were explored. Specifically, in the 0.1 M HCl extraction, the reduction efficiencies of As, Pb, and Cu leachings were more than 90 %, compared with control experiments. This study demonstrates that the application of waste resources for the stabilization of As and heavy metals is feasible. However, some limitations observed in the experiments should be considered in future studies, such as the mobilization of alkali-soluble elements, and in particular, exchangeable fractions of Cu. In addition, the treatment efficiency can be evaluated by different leaching methods, which suggests that multidirectional approaches are required for the proper evaluation of stabilization treatment.     

Effects of natural and calcined oyster shells on Cd and Pb immobilization in contaminated soils

In Korea, soils adjacent to abandoned mines are commonly contaminated by heavy metals present in mine tailings. Further, the disposal of oyster shell waste by oyster farm industries has been associated with serious environmental problems. In this study, we attempted to remediate cadmium (Cd)- and lead (Pb)-contaminated soils typical of those commonly found adjacent to abandoned mines using oyster shell waste as a soil stabilizer. Natural oyster shell powder (NOSP) and calcined oyster shell powder (COSP) were applied as soil amendments to immobilize Cd and Pb. The primary components of NOSP and COSP are calcium carbonate (CaCO₃) and calcium oxide (CaO), respectively. X-ray diffraction, X-ray fluorescence and scanning electron microscope analyses conducted in this study revealed that the calcination of NOSP at 770°C converted the less reactive CaCO₃ to the more reactive CaO. The calcination process also decreased the sodium content in COSP, indicating that it was advantageous to use COSP as a liming material in agricultural soil. After 30 days of incubation, we found that the 0.1 N HCl-extractable Cd and Pb contents in soil decreased significantly as a result of an increase in the soil pH and the formation of metal hydroxides. COSP was more effective in immobilizing Cd and Pb in the contaminated soil than NOSP. Overall, the results of this study suggest that oyster shell waste can be recycled into an effective soil ameliorant.     

Geostatistical integration using 2-D electrical resistivity and 3-D gravity methods for detecting cavities in a karst area

Two-dimensional (2-D) electrical resistivity and three-dimensional (3-D) gravity explorations were undertaken to estimate the 3-D distribution of karst cavities at the area of Yongweol-ri in Korea where ground subsidence has occurred. Although the gravity method is a low-cost way of analyzing a 3-D continuous structure, its vertical resolving power is poor. In contrast, the electrical resistivity method can provide a 2-D and/or 3-D subsurface structure with a much higher lateral and vertical resolution than the gravity method. Accordingly, geostatistical methods and density information were used to enhance the 2-D resistivity structure revealed by the electrical resistivity method into a 3-D structure. The assumptions are, first, that each data set senses the same underlying geological structure in terms of different material properties and, secondly, that two different material properties are correlated locally or globally throughout the entire target area. As a result, the distribution of limestone cavities can be estimated under the assumption that they are mostly filled with groundwater and clayey soils and have abnormally low levels of resistivity and density. The estimated distribution corresponds with the grouting, borehole imaging and monitoring data. In this example, it can be seen that the integration analysis of 2-D electrical resistivity and 3-D gravity methods is a very powerful tool for 3-D subsurface imaging and that the method can provide enhanced imaging capabilities for 3-D cavities.     

Structural changes in macrozoobenthic communities due to summer hypoxia in Gamak Bay,Korea

The purpose of this study was to examine the structural changes that macrozoobenthic communities underwent as a result of the annual summer hypoxia at the northern part of Gamak Bay, Korea. During this study period, summer hypoxia occurred at the northern part of Gamak Bay in July. Under hypoxic conditions, both the number of species and population density decreased rapidly. Species diversity also manifested lower values during this hypoxic period. Faunal composition changed seasonally with Capitella capitata dominant at the hypoxic sites in spring but disappearing in summer. The health condition of the benthic faunal community assessed by the composition of functional groups within community also changed due to the summer hypoxia from a slightly polluted condition to a highly polluted condition. From these results it has been shown that the recent macrozoobenthic community structure in Gamak Bay has returned to a state similar to what it was before dredging works commenced.     

Evaluation of bending moments and shear forces at unit connections of very large floating structures using hydroelastic and rigid body analyses

This paper investigates the characteristics of bending moments, shear forces and stresses at unit connections of very large floating structures (VLFS) under wave loads. The responses of VLFS are calculated by solving multi-body motion equation considering hydroelasticity and connection stiffness. Hydroelastic responses are calculated by the direct method. Higher-order boundary element method (HOBEM) is used for fluid analysis and finite element method (FEM) is introduced for structural analysis. The equation of motion is modified to describe the unit connections by employing spring elements. Bending moments and shear forces at the connections are obtained from the dynamic equilibrium condition for pressures and inertia forces. Two types of VLFS units such as tandem arranged units and side-by-side arranged units are considered in the numerical examples. The influences of connection stiffness, wave frequency and heading angle on responses of VLFS are investigated through the numerical examples. Rigid body analysis along with hydroelastic analysis is also carried out in the numerical analysis and comparison of those two approaches is discussed.     

硫酸皮肤素寡糖的分离与制备

利用软骨素酶 ABC (Chondroitinase ABC,EC4 .2 .2 .4 )对硫酸皮肤素 (Dermatan Sul-fate,DS)进行控制降解。对得到的混合寡糖首先采用低压凝胶渗透色谱 (L PGPC)进行分级 ,然后对每一组分再利用强阴离子交换高压液相色谱 (SAX- HPL C)进行分离 ,最终制备出聚合度为 2 ,4 ,6 ,8,10 ,12的寡糖纯品。寡糖纯度采用 SAX- HPL C,毛细管电泳 (CE)以及聚丙烯酰胺凝胶电泳(PAGE)进行检验 ,结构采用电喷雾离子化质谱 (ESI- MS)以及核磁共振波谱 (NMR)技术确定     

Massive sedimentation of fine sediment with organic matter and enhanced benthic-pelagic coupling by an artificial dyke in semi-enclosed Chonsu Bay, Korea

To assess the impact of an artificial dyke in Chonsu Bay (CBD) on the organic carbon (C(org)) cycle, we measured excess (210)Pb activities, C(org) and nitrogen content in sediment cores. The C(org) oxidation rates (C(ox)) on the surface sediment and benthic nutrient fluxes were also quantified with an in situ benthic chamber. The higher excess (210)Pb inventory, C(org) and nitrogen in cores near the CBD indicated lateral transport and local, massive deposition of particulate matter due to tidal circulation altered by artificial dyke construction. The C(ox) in sediment near the CBD was about twice as high as that out of the bay, suggesting the importance of benthic remineralization of organic matter. The benthic fluxes of dissolved inorganic nitrogen and phosphate were four to six times higher than those outside the bay, corresponding to 141% and 131% respectively, of the requirements for primary production.