Earth rotation in the hipparcos reference frame

New determination of the Earth orientation parameters (EOP), based on optical astrometry observations since the beginning of the century, is now under preparation by the Working group established by Commission 19 of the IAU. The Hipparcos catalog is to define the celestial reference frame in which the new series of EOP are to be described, The novelties of the prepared solution are the higher resolution (5 days) and more parameters estimated from the solution (celestial pole offsets, rheological parameters of the Earth, certain instrumental constants). The mathematical model of the solution is described, and the results based on the observations made with 46 instruments at 29 observatories and a preliminary Hipparcos catalog are presented.     

Chemical abundances determined from meteor spectra: I. Ratios of the main chemical elements

Abstract— Relative chemical abundances of 13 meteoroids were determined by averaging the composition of the radiating gas along the fireball path that originated during their penetration into the Earth's atmosphere. Mg, Fe, Ni, Cr, Mn, and Co abundances, relative to Si, are similar to those reported for CI and CM carbonaceous chondrites and interplanetary dust particles. In contrast, relative abundances of Ca and Ti in meteor spectra indicate that these elements suffer incomplete evaporation processes. The chemical composition of all meteoroids studied in this work differs from that of 1P/Halley dust.     

The passivation of calcite by acid mine water. Column experiments with ferric sulfate and ferric chloride solutions at pH 2

Column experiments, simulating the behavior of passive treatment systems for acid mine drainage, have been performed. Acid solutions (HCl or H₂SO₄, pH 2), with initial concentrations of Fe(III) ranging from 250 to 1500 mg L⁻¹, were injected into column reactors packed with calcite grains at a constant flow rate. The composition of the solutions was monitored during the experiments. At the end of the experiments (passivation of the columns), the composition and structure of the solids were measured. The dissolution of calcite in the columns caused an increase in pH and the release of Ca into the solution, leading to the precipitation of gypsum and Fe–oxyhydroxysulfates (Fe(III)–SO₄–H⁺ solutions) or Fe–oxyhydroxychlorides (Fe(III)–Cl–H⁺ solutions). The columns worked as an efficient barrier for some time, increasing the pH of the circulating solutions from 2 to 6–7 and removing its metal content. However, after some time (several weeks, depending on the conditions), the columns became chemically inert. The results showed that passivation time increased with decreasing anion and metal content of the solutions. Gypsum was the phase responsible for the passivation of calcite in the experiments with Fe(III)–SO₄–H⁺ solutions. Schwertmannite and goethite appeared as the Fe(III) secondary phases in those experiments. Akaganeite was the phase responsible for the passivation of the system in the experiments with Fe(III)–Cl–H⁺ solutions.     

The spatial implications of the functional proximity deriving from air passenger flows between European metropolitan urban regions

Until recently the traditional spatial configuration of the European geography was based upon the core-periphery model. The ‘pentagon’, broadly defined as lying between London, Paris, Milan, Munich and Hamburg, was seen as the core area characterised by having the highest concentration of economic development in the European Union (EU), with the remainder of the European territory viewed as peripheral, albeit to varying degrees. In a number of cases such peripheral areas equated with clear regional disparities. The elaboration of the European Spatial Development Perspective (ESDP) (CEC, European spatial development perspective, towards balanced and sustainable development in the territory of the European Union, 1999) challenged this core-periphery model. European spatial planning policies, aimed at encouraging social and economic, and with ever increasing importance, territorial cohesion, seek amongst other aspects to encourage the development of a balanced and polycentric urban system. This paper adopts a network analysis approach to the analysis of air passenger flows between some 28 principal European metropolitan urban regions. The evaluation of these flows contributes to an enhanced comprehension of the spatial dynamics of the European metropolitan territory which goes beyond that deriving from the more standard analyses of the individual components of the urban system. Several indicators are used, deriving from gravitational modelling techniques, to analyse the complexity of the air passenger flows. A multidimensional scaling (MDS) technique is introduced in order to interpret and visualise the resulting spatial configuration and positioning of the different metropolitan centres within the conceptual European ‘space of air passenger flows’, thereby contrasting with the more traditional map-based geographical image of Europe, based upon Cartesian coordinates.

Biaxial test simulations using a packing of polygonal particles

The mechanical response of cohesionless granular materials under monotonic loading is studied by performing molecular dynamic simulations. The diversity of shapes of soil grains is modelled by using randomly generated convex polygons as granular particles. Results of the biaxial test obtained for dense and loose media show that samples achieve the same void ratio at large strains independent of their initial density state. This limit state resembles the so‐called critical state of soil mechanics, except for some stress fluctuations, which remain for large deformations. These fluctuations are studied at the micro‐mechanical level, by following the evolution of the co‐ordination number, force chains and the fraction of the sliding contacts of the sample. Copyright © 2007 John Wiley & Sons, Ltd.     

Transient biouptake flux and accumulation by microorganisms: The case of two types of sites with Langmuir adsorption

The uptake of a chemical species by an aquatic microorganism is modelled considering two kinds of sites where Langmuirian adsorption is followed by first order internalisation kinetics. Simpler models, such as only one internalisation route (while most of the adsorption takes place on non-internalising sites) or a linear isotherm for adsorption on one or both sites, become limiting cases of this double-Langmuirian model. The model considers the sites located on the spherical (or semi-spherical) surface of the organism, and takes diffusion from the medium into explicit account. The numerical solution for the internalisation flux shows a maximum. We provide an estimate for the time needed to reach a certain proximity to steady state. The transient solution confirms that the analytical expressions for the steady-state flux are usually valid and that the accumulated amounts reflect the impact of the short-time uptake. The Instantaneous Steady-State Approximation (ISSA), where an intercept of the linear regression of accumulated amount as a function of time is interpreted as an adsorbed amount, can be critically assessed with the transient numerical code for two cases: (i) when the total burden of metal on the cell is the input data and (ii) when an extraction procedure provides further information on the adsorbed and internalised amount.     

Regional Seas and Sustainable Development Results of an International Workshop

Reports

Regional Seas and Sustainable Development Results of an International Workshop     

Daily Meteorological Observations in Cádiz – San Fernando. Analysis of the Documentary Sources and the Instrumental Data Content (1786–1996)

Meteorological observations in the city of Cádiz are acknowledged as having been made from the middle of the 18th century onwards although they were only recorded and preserved in documentary form from 1789 onwards. Data readings were taken at the new Naval Observatory in San Fernando, ten kilometres from Cádiz, from 1797 onwards. Continuous series for temperature and atmospheric pressure at a daily resolution have been compiled and constructed from 1817 until 1996. The data series is composed of thrice daily observations made at Cádiz (1821–1880) by local observers and hourly data from Naval Observatory at San Fernando (1870–1996).     

Applicability of a Backprojection Algorithm to Reconstruct Images of Subsurface Horizontal Planes for Laboratory Experiments in Electrical Resistance Tomography

This paper describes the use of a backprojection algorithm to reconstruct subsurface images of the electrical resistivity in horizontal planes parallel to the surface. The algorithm can be applied to detect buried objects such as tanks or pipes and possible leakages from them. Two imaging strategies are compared: juxtaposition of vertical planes, and 3D reconstruction from the sensitivity matrix corresponding to the entire volume whose surface is explored. The electrode arrays used for voltage measurement are the dipole–dipole array and a modified Schlumberger array. A personal computer controls current injection, electrode switching, and voltage detection. The system injects 1 kHz, 20 V peak-to-peak square waveforms, thus avoiding electrode polarization effects. Experimental laboratory measurements show that the algorithm detects localized objects such as an insulating sphere and a conductive cylinder immersed in water. Furthermore, covering half of the cylinder by a rubber sleeve to simulate a nonconductive leak, yields a distinct image for the leak. The backprojection algorithm does not need any regularization parameter and it is very fast in inverting the sensitivity matrix because it approximates the inverse matrix by its transposed. The dipole–dipole array usually yields a lower overall pixel error than the modified Schlumberger array but both allow the detection of simulated underground leaks.