In situ strength measurements on natural upper-mantle minerals

Using in situ strength measurements at pressures up to 10 GPa and at room temperature, 400, 600, and 700°C, we examined rheological properties of olivine, orthopyroxene, and chromian-spinel contained in a mantle-derived xenolith. Mineral strengths were estimated using widths of X-ray diffraction peaks as a function of pressure, temperature, and time. Differential stresses of all minerals increase with increasing pressure, but they decrease with increasing temperature because of elastic strain on compression and stress relaxation during heating. During compression at room temperature, all minerals deform plastically at differential stress of 4–6 GPa. During subsequent heating, thermally induced yielding is observed in olivine at 600°C. Neither orthopyroxene nor spinel shows complete stress relaxation, but both retain some stress even at 700°C. The strength of the minerals decreases in the order of chromian-spinel ≈ orthopyroxene > olivine for these conditions. This order of strength is consistent with the residual pressure of fluid inclusions in mantle xenoliths.     

Detection of systematic errors in XBT data and their correction

Comparison experiment between XBT of T-7 probe and CTD was conducted at 15 stations in the sea area centered on 29°N, 135°E in December 1985. There were systematic errors in XBT temperature profiles in comparison with CTD temperature profiles. The main cause of errors was attributed to an error in the free-fall speed of the XBT probes which was provided by the XBT maker. A previous equation for depth correction proposed by Heinmilleret al. (1983) could not give effective correction for our data. A new equation between the probe depth and the elapsed time from landing of the probe on the water was obtained by the method of adjusting temperature gradients of XBT profiles to those of CTD profiles. This equation agreed with the theoretical result given by Seaver and Kuleshov (1982) much better than that of Heinmilleret al. (1983). Systematic errors due to a scatter of values of the reference resistance and variation of B-constant of thermistors used in XBT also seemed to exist. After an adjustment using the temperature difference between XBT and CTD in the mixed layer with depths of about 100 m, the standard deviation of temperature difference between XBT and CTD from the surface to the depth of 750 m was 0.14°C.     

Detecting fluctuations of the Kuroshio axis south of Japan using TOPEX/POSEIDON altimeter data

Sea surface dynamic topography (SSDT) can be divided into temporal mean SSDT and fluctuation SSDT. The former is approximated with a climatological mean SSDT and the latter is derived from satellite altimetry data, to give an approximated total SSDT (called a composite SSDT). The method is applied to detecting fluctuations of the Kuroshio axis south of Japan using TOPEX/POSEIDON altimeter data from the first year mission in 1992–1993. The fluctuation SSDT averaged over a wide area south of Japan clearly shows an annual cycle with an amplitude of about 15 cm. Temporal changes of SSDT along a subsatellite track crossing the Kuroshio compare moderately well with those estimated from repeated hydrographic observations, although there is a discrepancy of unknown origin. The composite SSDT also compares well with SSDT estimated from the same hydrographic data. Horizontal distribution of the surface geostrophic velocity component normal to subsatellite tracks is derived every ten days from the composite SSDT. Most locations of estimated strong eastward geostrophic velocities coincide well with locations of the Kuroshio axis determined every 15 days fromin situ surface velocity measurements on various vessels; for example, a fairly large meander of the Kuroshio south of Honshu is clearly detected. It is concluded that the composite SSDT can be used reliably to detect fluctuations of the Kuroshio axis south of Japan.     

Finite-element Simulation of Seismic Ground Motion with a Voxel Mesh

— Accurate simulation of seismic ground motion for three-dimensionally complex topography and structures is one of the most important goals of strong motion seismology. The finite-element method (FEM) is well suited for this kind of simulation, since traction-free conditions are already included in the formulation, and the Courant condition is less strict than for the finite-difference method (FDM). However, the FEM usually requires both large memory and computation time. These limitations can be overcome by using a mesh consisting of voxels (rectangular prisms) with isotropy built into the explicit formulation of the dynamic matrix equation. Since operators in the voxel FEM are the combinations of ordinary FDM operators and additional terms, the method keeps accuracy of the same order as FDM and the terms relax the Courant condition. The voxel FEM requires a similar amount of memory and only takes 1.2～1.4 times longer computation time. The voxel mesh can be generated considerably faster than the popular tetrahedral mesh. Both ground motions and static displacements due to a point or line source can be calculated using the voxel FEM approach. Comparisons with the reflectivity method and theoretical solutions demonstrate the successful implementation of the method, which is then applied to more complex problems.     

A Simple Single-Layer Urban Canopy Model For Atmospheric Models: Comparison With Multi-Layer And Slab Models

We developed a simple, single-layer urban canopy model, and comparedit to both multi-layer and slab models. Our single-layer model has thefollowing features: (a) It is a column model of energy and momentumexchange between an urban surface and the atmosphere, (b) it includesthe influence of street canyons, which are parameterized to representthe urban geometry, (c) it includes shadowing from buildings andreflection of radiation, and (d) it estimates both the surfacetemperatures of, and heat fluxes from, three surface types: roof, wall,and road. In the simulation of the single-layer model, the roof washottest during the daytime, but coolest from midnight to early morning.This is consistent with output from the multi-layer model and fieldobservations at a residential area on a clear, summer day. The diurnalvariation of the energy budget from the single-layer model agrees wellwith that from the multi-layer model. Our single-layer model'sperformance is nearly that of a multi-layer model for studyingmesoscale heat islands. Nevertheless, it is simply parameterized,and thus easily included in larger-scale atmospheric models. The slabmodel has the largest nighttime cooling rate of the three models. Toovercome this, it needs more adjustments than for the canopy models.     

Correction to: El Niño-related sea surface elevation and ocean bottom pressure enhancement associated with the retreat of the Oyashio southeast of Hokkaido,Japan

Marine Geophysical Research - In the original publication, the Fig. 2 was published incorrectly. The correct version (Fig. 2) is given in this correction. The original article has been...     

The characteristic distribution of silica over the East China Sea shelf slope

The localized near-bottom water with silica content higher than that in the adjacent shelf water was observed to exist at the eastern margins of the East China Sea continental shelf. The core of the high silica water possessed the silica content corresponding to that in the Kuroshio at depths greater than on the shelf. The mixing analysis of water masses using temperature (T) and silica (Si) showed that the core water can be produced through the vertical mixing of intermediate water of the Kuroshio deeper than 100 m. This study provides us a conclusion that the intermediate water of the Kuroshio is strongly mixed on the shelf slope and then upwelled to form the ridge-like distribution of water masses with low temperature and high silica content at the shelf edge.     

Improved Estimates of Wide-Ranging Sea Surface Temperature from GMS S-VISSR Data

We have developed an algorithm to estimate the wide-ranging Sea Surface Temperature (SST) data from the GMS-5 (Geostationary Meteorological Satellite) S-VISSR (Stretched-Visible Infrared Spin Scan Radiometer). Better SST estimates are realized by averaging the temporal variation of the VISSR calibration table and decreasing noise of the split-window terms using a spatial filter. The effects of the satellite zenith angle were examined in detail for better estimates, and VISSR-derived SSTs with root-mean-square (rms) error of 0.8 K were achieved using a new algorithm. The accuracy of SST estimates has been improved by using the temporal-spatial average of the split-window terms. Using the new techniques, we demonstrate that the hourly wide-ranging SST image data can be used to study the daily variations of SSTs in the Northern and Southern Pacific Oceans.     

A note on internal wavetrains and the associated undulation of the sea surface observed upstream of seamounts

An internal wavetrain, generated by a tidal current in superposition with the Tsushima Warm Current, has been observed by use of an acoustic echo-sounder upstream of the Shichiri-Ga-Sone Seamounts in the East Tsushima Strait of the Japan Sea. The sea surface above the internal wavetrain was simultaneously observed and was found to be undulated at the wavelength of the internal wave.     

The instability of viscous two-layer oscillatory flows

The instability of oscillatory flows in a two-layer fluid where the two layers differ in density and viscosity has been analysed using a perturbation method for long waves with special interest on effects of viscosity, time scale, density and depth of the fluid. The flow of a fluid with homogeneous density can be unstable, when the kinematic viscosity of the upper fluid layer is different from that of the lower one. Viscosity stratification results in unstable oscillatory flows. Two limiting cases of single-layer flow are also considered.