Spatial Distribution of Fractures in the Asmari Formation of Iran in Subsurface Environment: Effect of Lithology and Petrophysical Properties

The distribution of fractures and its dependence on lithology and petrophysical properties of rock in the Asmari Formation were examined using three wells data of one of the largest oil fields of southwestern Iran. Fractures were measured on cut cores. Mineral content and petrophysical data were obtained through thin section study and core plug measurement respectively. Influence of mineral composition and petrophysical property of rocks on fracture density was explored statistically. Increasing quartz (sand) and anhydrite content of rocks decrease and dolomite increases the threshold of fracture densities, however no significant relation was observed between calcite content of rock and fracture density. Increasing porosity and permeability of rock decrease the threshold of fracture density in some of the defined lithology groups. There are significant differences between the lithology groups in terms of fracture density, although the results in the three wells are not the same. In whole data, the highest fracture density can be observed in dolostone. Limestone and impure carbonates hold broader spaced fractures and sandstones display the least fracture density. The average fracture densities in the wells are strictly different. These differences are the result of the structural position of the wells and also the trend of the well and fractures. The distribution of fractures in most lithology groups can be explained by the function: , where F is relative frequency, D is fracture density and a, b, and c are constants.     

Sequence signal processing of 2012 Ahar–Varzaghan earthquake (<Emphasis Type="Italic">M</Emphasis><Subscript>W</Subscript> 6.4) of NW Iran

Before starting seismic cycle of Ahar–Varzaghan 2012 event, a partial gap in the form of a pre-seismic calm sequence (seismicity rate, r = 0.46 event/year, b = 1.4) with duration of 303 days spatially has dominated over the entire seismogenic area. From April 17, 2012, to May 31, 2012, r significantly increased to 2.16, indicating strong foreshock sequence, and b value changed to 1.9, remarkably. In the last two months before the mainshock, foreshocks have partially migrated toward the earthquake fault (with a decrease in size, b = 2.0). Significantly, high rate of seismicity and low V _P /V _S (1.64) in the foreshocks sequence and also very high seismicity rate (17.3) and high V _P /V _S (1.76) in the aftershocks sequence make substantial differences between the seismic cycle and the background seismicity. Moreover, a significant E–W migration of the microseismicity was confirmed in the study area.     

Biodegradation of phenol from a synthetic aqueous system using acclimatized activated sludge

Phenol is one of the aromatic hydrocarbons. Phenol and its derivatives are highly toxic. These pollutants can be observed in the effluents of many industries. This research investigates the removal of phenol by the use of activated sludge in a batch system. The effects of influencing factors on biodegradation efficiency have been evaluated. The main factors considered in this study were the volume of acclimatized activated sludge inoculation, pH, temperature, and initial concentration of phenol. The inoculation volumes of 1, 3, and 5 mL of acclimatized activated sludge were taken into account. Different pH values of 3, 5, 7, 9, and 11 were examined. The experiments were conducted for temperatures of 25, 30, 35, and 40 °C and initial phenol concentrations of 400, 800, 1,000, and 1,500 ppm. The results show that the acclimatized activated sludge has a high capacity for the removal of phenol. From a 100-mL aqueous solution was removed 1,500 ppm of phenol after 80 h. Furthermore, maximum phenol removal was observed for an inoculation volume of 5 mL for three different phenol concentrations of 100, 400, and 800 ppm. The best pH was 7 for the biodegradation process, and the optimum temperature was 30 °C. It was further found that an increase in the phenol concentration increased its removal time. Moreover, the activated sludge could effectively remove about 99.9 % of phenol from a synthetic aqueous solution in a batch system.     

Biological assessment of the Zayandeh Rud River, Iran, using benthic macroinvertebrates

Benthic macroinvertebrate communities from the middle of Zayandeh Rud River were analyzed monthly during 1 year at 8 stations, in order to assess changes in their diversity and richness in relation to water quality. Two major groups of sites based on similarity between macroinvertebrate communities were identified by cluster analysis. The performances of the original and revised BMWP score systems were assessed by comparing the community structure indices of benthic macroinvertebrates along with physico-chemical parameters of the water. The biotic indices (BMWP, ASPT, revised BMWP and ASPT) showed better correlation with water quality parameters than that of the richness and diversity indices. The revised ASPT had the highest correlation with water quality parameters. It seems that the application of the revised BMWP score system could be useful for assessment of the water quality in Zayandeh Rud River.     

Tornadic Time-Series Detection Using Eigen Analysis and a Machine Intelligence-Based Approach

The research Weather Surveillance Radar-1988 Doppler locally operated by the National Severe Storms Laboratory in Norman, OK, has the unique capability of collecting massive volumes of Level I time-series data over many hours, which provides a rich environment for evaluating our new postprocessing algorithms. In this letter, an approach of identifying tornado vortices in Doppler spectra is proposed and investigated using eigen analysis, cluster estimation, and fuzzy logic technique.     

Production of perovskite catalysts on ceramic monoliths with nanoparticles for dual fuel system automobiles

(Lanthanum, Cerium)(Iron, Manganese, Cobalt, Palladium)(Oxygen)3-Perovskite catalyst was prepared by the citrate route and deposited on ceramic monoliths via dip coating procedure. The catalyst was applied on a car with XU7 motors and the amount of emission was monitored with vehicle emission test systems in Sapco company. The results were compared with the imported catalyst with noble metals such as palladium, platinum and rhodium by Iran Khodro company based on the Euro III standards. The catalysts were characterized by specific surface area measurements, scanning electron microscopy, X-ray diffraction, line scan and map. In the results, obtained in the home made sample, the amount of carbon monoxide, nitrogen oxides and hydrocarbons were lower than imported catalyst with Iran Khodro company with nobel metals. The illustration shows nano particles size on coat. The microstructure evaluation showed that the improved properties can be related to the existence of nano particles on coating.     

Characterization and photocatalytic activities of nanosized titanium dioxide thin films

Thin films of titanium dioxide with high surface area are prepared by sol-gel dip-coating technique. In this regards, Titania nano sols with high photocatalytic activity were prepared by dissolving titanium alkoxide in alcohol and water under acidic conditions. Photocatalytic activities of titanium dioxide thin films were measured in the presence of methylene blue. Microstructure and photocatalytic activity of the films, nanopowders and titanium dioxide sols were investigated using X-ray diffraction, scanning electron microscopy, specific surface area, zeta sizer and ultraviolet-visible spectrometry techniques. Particle size analysis of sols showed that the mean particle sizes were 15 to 128 nm. X-ray diffraction analyses revealed that anatase crystal structure was produced with crystallite size below 11 nm. Increasing mass percent of anatase phase and specific surface area, enhance the photocatalytic activity. Scanning electron microscopy images showed that the addition of methylcellulose as a dispersant, not only produced rough texture in the thin film, but also enhanced photocatalytic activity. The thin films prepared by using nitric acid as a stabilizer, revealed higher photocatalytic activity, surface area and sol stability and these data were more than those prepared with acetic acid.     

Does beach seine fishery permanently alter macroinvertebrate communities and sediment characteristics in the Southern Caspian Sea?

The impacts of a beach seine fishery on macroinvertebrate communities and sediment characteristics were investigated in the Southwest Caspian Sea. Samples from a single impacted site that was regularly seined were compared with two control sites outside the fishing area. Benthic macroinvertebrates were sampled on four occasions: 6 months prior to the opening of the beach seine fishery (Time 1), 1 day immediately after the closing of beach seining (Time 2), 1 week after closing (Time 3), and 1 month after closing (Time 4). No significant differences were detected in total density, Shannon diversity, or evenness of the macroinvertebrate assemblages between impact and control sites. Unlike density, species richness increased significantly immediately after fishery closure at all sites. A significant difference was detected in the number of species between Time 2 and Time 3 at all sites and the number of species was reduced at Time 4 in all sites. Pontogammarids increased by twofold in the impact site 1 day immediately after closing beach seine fishery and leveled off toward the end of the closed season. The amplified density of pontogammarids 1 day after fishery closing at the impact site might be driven in part by an increase in sediment oxygen content resulting from disturbance of the sea floor. An alternative explanation is that the effect of fish predation on pontogammarids has largely been minimized at the impact site after 6 months of continuous fishing activity. No significant changes in the sedimentary organic content and chlorophyll‐a between the impact and control sites were observed during the courses of sampling; however, a significant change occurred between the average sedimentary pheopigment content of the control sites and that of the impact site. The conclusion from the present study is that beach seine fishery does not harm to benthic communities. The closed season also seemed to allow recovery to pre‐season levels of macroinvertebrate richness and sedimentary chlorophyll‐a.