Selection of Less Biased Threshold Angles for SAM Classification Using the Real Value–Area Fractal Technique

The accuracy of classification of the Spectral Angle Mapping (SAM) is warranted by choosing the appropriate threshold angles, which are normally defined by the user. Trial‐and‐error and statistical methods are commonly applied to determine threshold angles. In this paper, we discuss a real value–area (RV–A) technique based on the established concentration–area (C–A) fractal model to determine less biased threshold angles for SAM classification of multispectral images. Short wave infrared (SWIR) bands of the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) images were used over and around the Sar Cheshmeh porphyry Cu deposit and Seridune porphyry Cu prospect. Reference spectra from the known hydrothermal alteration zones in each study area were chosen for producing respective rule images. Segmentation of each rule image resulted in a RV–A curve. Hydrothermal alteration mapping based on threshold values of each RV–A curve showed that the first break in each curve is practical for selection of optimum threshold angles. The hydrothermal alteration maps of the study areas were evaluated by field and laboratory studies including X–ray diffraction analysis, spectral analysis, and thin section study of rock samples. The accuracy of the SAM classification was evaluated by using an error matrix. Overall accuracies of 80.62% and 75.45% were acquired in the Sar Cheshmeh and Seridune areas, respectively. We also used different threshold angles obtained by some statistical techniques to evaluate the efficiency of the proposed RV–A technique. Threshold angles provided by statistical techniques could not enhance the hydrothermal alteration zones around the known deposits, as good as threshold angles obtained by the RV–A technique. Since no arbitrary parameter is defined by the user in the application of the RV‐A technique, its application prevents introduction of human bias to the selection of optimum threshold angle for SAM classification.     

Integrative propositions for adapting conservation policy to the impacts of climate change

Conservation policies have changed over time in response to changes in human and ecological drivers. The impacts of climate (and other) concurrent changes prompt consideration of further iterations for both conservation means and objectives. In this paper we bring together previous disparate literatures and apply them to the question of how to adapt conservation polices to suit an era of climate change impacts. Our approach is based on two assertions: (i) that the integration of specific natural and social science insights is essential for understanding and effectively responding to this challenge, and (ii) that in addition to adaptive conservation means (strategies), attention needs to be given to considering adaptive conservation objectives. Specifically, we convert a core set of natural and social science insights into analytical tools known as heuristics or rules of thumb. We then use the heuristics as a basis to offer a list of preliminary propositions that can help inform the development of new means and objectives. The propositions address key considerations including recalibrating management objectives, the role of disturbance in facilitating ecological transitions, and overarching topics relating to governance. The propositions are speculative, and so intended only to outline potential avenues for further empirical research and subsequent refinement. In the spirit of adaptation, we expect and welcome their revision.     

Effect of Drain Pipes on Uplift Force and Exit Hydraulic Gradient and the Design of Gravity Dams Using the Finite Element Method

Geotechnical and Geological Engineering - The effects of diameter and location of drain pipes on the uplift force and exit hydraulic gradient for a gravity dam are investigated. A numerical model...     

Beating words to life: subtitles,assemblage(s)capes,expression

Ostensibly, subtitles in films serve as linguistic approximations of meaning. Expectedly then, much of the debate surrounding subtitling has been concerned with representational accuracy, fidelity and authenticity. In this article I argue that by encountering subtitles as affective bodily expressions, as opposed to approximate representations of pre-existent meanings or intentions, filmic experiences may be(come) transformed and differently transformational. As a result, meaning and accuracy in subtitles as superimposed signifiers or static representations become secondary to subtitles as spatially affective- and expressive-movements intimately part of filmic scapes. The creative use of subtitling in Bekmambetov’s Russian language film Night Watch (Nochnoy dozor; 2006 [2004]) is discussed.

Prediction of Rock Abrasivity Index (RAI) and Uniaxial Compressive Strength (UCS) of Granite Building Stones Using Nondestructive Tests

Geotechnical and Geological Engineering - Rock abrasivity index (RAI) and uniaxial compressive strength (UCS) are two key parameters for assessing abrasivity and durability of building stones,...     

Experimental study on the effect of bottomless structure in front of a bottom outlet on a sediment flushing cone

One of the main problems in reservoirs is sedimentation which reduces the operating life of dams if a proper plan and analysis method are not in place.The techniques to manage sediment in reservoirs include several sustainable management techniques that route sediment through or around the reservoir.One of the main economical methods in arid and semi-arid regions is pressurized flushing using moderate drawdown of the water level of the reservoir to evacuate sediment deposited behind dams.In the current study,the effect of a new structure called a dendritic bottomless extended(DBE)outlet structure at three angles of 30°,45°,and 60°
on pressurized flushing efficiency was investigated.Consequently,45 experiments were designed for three discharge rates (Qo),three sediment levels(Hs),four types of structure,and a no-structure condition(reference test).The results indicated that the DBE structure with a 30°angle between the branches,a sedimentary dimensionless index of Hs/Do=4.59,and a flow dimensionless index of Qo=/√gD05=1:43(where g is the acceleration of gravity and Do is the diameter of the bottom outlet)lead to 10-fold increase in the sediment flushing cone dimensions and sediment removal efficiency compared to the results of the reference test.Finally,according to a statistical analysis of the results,a dimensionless equation for calculating the sediment flushing cone dimensions was developed for the tested sediment characteristics.     

A near-fault probabilistic seismic hazard assessment for Yasouj,located in the Kazerun fault system,southwest Iran

Natural Hazards - The Kazerun fault system (KFS) is located in the central part of the Zagros, the most seismically active orogenic belt in the Iranian plateau. The city of Yasouj is located in the...     

Subduction-related mafic to felsic magmatism in the Malayer–Boroujerd plutonic complex,western Iran

The Malayer–Boroujerd plutonic complex (MBPC) in western Iran, consists of a portion of a magmatic arc built by the northeast verging subduction of the Neo-Tethys plate beneath the Central Iranian Microcontinent (CIMC). Middle Jurassic-aged felsic magmatic activity in MBPC is manifested by I-type and S-type granites. The mafic rocks include gabbroic intrusions and dykes and intermediate rocks are dioritic dykes and minor intrusions, as well as mafic microgranular enclaves (MMEs). MBPC Jurassic-aged rocks exhibit arc-like geochemical signatures, as they are LILE- and LREE-enriched and HFSE- and HREE-depleted and display negative Nb–Ta anomalies. The gabbro dykes and intrusions originated from metasomatically enriched garnet-spinel lherzolite [Degree of melting (f_mel) ~ 15%] and exhibit negative Nd and positive to slightly negative ε_Hf(T) (+ 3.0 to ? 1.6). The data reveal that evolution of Middle Jurassic magmatism occurred in two stages: (1) deep mantle-crust interplay zone and (2) the shallow level upper crustal magma chamber. The geochemical and isotopic data, as well as trace element modeling, indicate the parent magma for the MBPC S-type granites are products of upper crustal greywacke (f_mel: 0.2), while I-type granites formed by partial melting of amphibolitic lower crust (f_mel: 0.25) and mixing with upper crustal greywacke melt in a shallow level magma chamber [Degree of mixing (f_mix): 0.3]. Mixing between andesitic melt leaving behind a refractory dense cumulates during partial crystallization of mantle-derived magma and lower crustal partial melt most likely produced MMEs (f_mix: 0.2). However, enriched and moderately variable ε_Nd(T) (? 3.21 to ? 4.33) and high (⁸⁷Sr/⁸⁶Sr)_i (0.7085–0.7092) in dioritic intrusions indicate that these magmas are likely experienced assimilation of upper crustal materials. The interpretations of magmatic activity in the MBPC is consistent with the role considered for mantle-derived magma as heat and mass supplier for initiation and evolution of magmatism in continental arc setting, elsewhere.     

Mineral chemical composition and geodynamic significance of peridotites from Nain ophiolite,central Iran

The peridotites from north of the town of Nain in central Iran consist of clinopyroxene-bearing harzburgite and lherzolite with small lenses of dunite and chromitite pods. The lherzolite contains aluminous spinel with a Cr number (Cr^# = Cr/[Cr + Al]) of 0.17. The Cr number of spinels in harzburgite and chromitite is 0.38–0.42 and 0.62, respectively. This shows that the lherzolite and harzburgite resulted from <18% of partial melting of the source materials. The estimated temperature is 1100 ± 200 °C for peridotites, the estimated pressure is <15 ± 2.3 kbar for harzburgites and >16 ± 2.3 kbar for lherzolites and estimated fo₂ is 10^?1±0.5 for peridotites. Discriminant geochemical diagrams based on mineral chemistry of harzburgites indicate a supra-subduction zone (SSZ) to mid-oceanic ridge (MOR) setting for these rocks. On the basis of their Cr^#, the harzburgite and lherzolite spinels are analogous to those from abyssal peridotites and oceanic ophiolites, whereas the chromites in the chromitite (on the basis of Cr^# and boninitic nature of parental melts) resemble those from SSZ ophiolitic sequences. Therefore, the Nain ophiolite complex most likely originated in an oceanic crust related to supra-subduction zone, i.e. back arc basin. Field observations and mineral chemistry of the Nain peridotites, indicating the suture between the central Iran micro-continent (CIM) block and the Sanandaj–Sirjan zone, show that these peridotites mark the site of the Nain–Baft seaway, which opened with a slow rate of ocean-floor spreading behind the Mesozoic arc of the Sanandaj–Sirjan zone as a result of change of Neo Tethyan subduction régime during middle Cretaceous.