The spatial distribution of volatiles in the Martian hydrolithosphere

In order to quantify the spatial distribution of volatiles on Mars, 2600 fluidized ejecta craters have been systematically measured, classified and mapped over the planet Mars, using 1 : 2 M scale USGS photomosaics. The latitudinal distribution of ejecta craters reveals that flower ejecta deposits (Type 1), together with low mobility ejecta, are frequently observed in the equatorial region and on ridged plains. Rampart craters (Type 2), with high mobility ejecta, occur at mid latitudes and exhibit a spatial relationship with polygonal patterns and pseudocrater areas. The increase of ejecta mobility with latitude attests for a concentration of volatiles at high latitudes. Statistical analysis shows that cratered uplands and ridged plains contain less volatile material near the surface than the underlying materials. In Chryse Planitia and Utopia Planitia the statistical study and the spatial relationships between polygonally fractured patterns, pseudocraters and the great number of high mobility ejecta deposits suggest the presence of a water-rich alluvial deposit close to the surface near the mouth of Chryse and Elysium channels. This result explains, on a more quantitative basis, the idea that fractured patterns were preferentially developed in a volatile-rich sedimentary deposits. The behaviour of volatiles, at 41 S, 257 W near Reull Vallis, exhibits a strong anomaly, with the presence of an abnormally volatile rich layer close to the surface.     

Chromium speciation in oxide-type compounds: application to minerals,gems, aqueous solutions and silicate glasses

Cr K-edge XANES spectra were obtained for a variety of Cr-bearing model compounds containing Cr(II), Cr(III), Cr(IV), Cr(V) and Cr(VI), in which the Cr-site symmetry is D4h, Oh and Td. The centroid position of the pre-edge feature is a better indicator of the Cr valence than the edge position. In Cr-rich oxides, higher-energy transitions must be excluded in order to refine a robust valence for Cr. The pre-edge for chromates is not unique and varies as a function of the CrO₄ ^2? moiety distortion, which is often related to Cr-polymerization (monochromate vs. dichromate). Both the analogy with the Mn K-pre-edge information and ab initio FEFF calculations of the pre-edge feature for Cr(III) and Cr(VI) confirm the experimental trends. This methodology is applied to the Cr K-edge pre-edge feature collected in gems (emerald, spinel and ruby), the layered minerals fuchsite and kämmererite, two Cr-bearing aqueous solutions and a set of sodo-calcic silicate glasses used for bottling sparkling white wine. In emerald and fuchsite, the Cr-site is differently distorted than its ruby or spinel counterpart. In a Cr(III)-bearing aqueous solution and sodo-calcic glass, no evidence for Cr(III) with Td and C3v symmetry is detected. However, minor amounts of chromate moieties (most likely monomeric) are detected in a glass synthesized in air. Preliminary spectra for the wine bottle glass suggest that only trace amounts of chromates might possibly be present in these glasses.     

Groundwater metering: revisiting a ubiquitous ‘best practice’

Hydrogeology Journal - It is often taken for granted that metering is an unarguable ‘best practice’ when it comes to the quantitative management of groundwater resources. This paper...     

Rječina River sediments (Croatia): from captured spring to polluted prodelta

Surface sediments (fraction <63 μm) from the source to the mouth of the Rječina, short (18.3 km) karst allogenic river in Croatia, which is an important source of drinking water, were studied to investigate their mineral (by XRD) and chemical (by ICP-MS) composition to check possible anthropogenic influence at the lower course due to paper industry and mills, and in the prodelta area from untreated municipal sewage and the large harbor of Rijeka town. In all analyzed sediment samples and in the sandstone source, rock quartz is a major mineral, while feldspar and mica group minerals are less abundant. Chlorite is a minor or trace mineral in all samples. Calcite and dolomite are abundant in the river prodelta, reflecting changes in bedrock lithology from flysch to carbonates. In river sediments, Fe is the most abundantly analyzed element, while Ca is the most abundant in prodelta sediments. Concentrations of Al, Mn, Ni, Cr, Co, La and Nd decrease downstream, while Mg, S, Na, B, Pb, Zn, As, Sn, U, Mo, Hg and Ag have relatively higher concentration in prodelta sediments. The results are compared with sediments of other rivers in the area: Raša, Rižana and Dragonja, as well as with those of the Rosandra Creek (Italy). Sediments in the Raša River showed similar behavior as those in the Rječina, as the highest concentration of metals was found in the restricted upper part of the estuary, characterized by rapid deposition of clay particles and terrestrial sedimentary organic matter. The comparison also showed that the most contaminated were the sediments from the Rižana, followed by those from the Rječina and Rosandra Creek, which had similar results. Among the studied elements, As was present in all sediment samples at concentrations >6 ppm that might have the lowest toxic effects. At the lower Rječina and in prodelta sediments, Pb was also present at slightly elevated concentrations (>31 ppm) that could cause such effects. Concentrations of Zn in the prodelta correspond to those occurring in moderately polluted sediments (90–200 ppm). In the prodelta sediments, Hg is slightly below toxicity threshold (1 ppm), while Ag is present at toxicity threshold (0.5 ppm) or close to it. Rječina River could act as a good illustrative example for behavior of toxic metals in allogenic karstic rivers, in which accumulation of anthropogenically introduced pollutants usually occurs in their estuaries, as a result of transport and deposition of fine particles.     

Hydrogeochemical characteristics of central Jianghan Plain, China

The central Jianghan Plain is the semi-closed basin in the middle reaches of Yangtze River. A total of 78 water samples targeting groundwater were collected from 75 sites in this study site, the area between Yangtze River and Han River, including rivers and lakes for temperature, pH, electrical conductivity (EC), total dissolved solids (TDS) and ion composition measurements. Correlation matrix was used to assess the geochemical and anthropogenic processes. The most confined groundwater was grouped into HCO₃–Ca–Mg, while phreatic groundwater and surface water had a more diversified hydrochemistry. The spatial variation in overall water quality as well as comparison with WHO (World Health Organization) standards for drinking water is illustrated. Mn, As and NO₃ ^? concentrations were found to exceed the allowable limits for drinking water of WHO guidelines, and they also show remarkable spatial variations. Abnormally high nitrate concentration, up to 150–190 mg/l, was found only in phreatic groundwater, which suggested that the nitrate pollution might be caused by agricultural activities. The present study may be helpful in further studies concerning water quality issues in this area where groundwater is a vital source for drinking and other activities.     

Tectonic and seismic conditions for changes in spring discharge along the Garni right lateral strike slip fault (Armenian Upland)

Abstract

This study presents the relationship between local seismicity and springs discharge, in which the microseismicity modifies the state of stress of the aquifer matrix and these modifications of the local stress control the aquifer behaviour from an example of a basaltic reservoir crossed by a seismic fault.

Along the right-lateral Garni seismic wrench fault, the distribution in space and time of more than 500 micro-earthquakes has been studied providing a pattern of stress distribution. Together with this tectonic survey, the hydrographs of springs issuing from an aquifer located in basaltic lava flows and crossed by the fault have been gauged for 4 years. According to its tectonic, geologic and hydrodynamic properties, the reservoir has been divided in to several parts. The hydrological behaviour of the reservoir and of each of its parts has been modelled, based on the rainfall and hydrodynamic properties of the basaltic reservoir and of nearby reservoirs.

The model allows us to define the ‘normal behaviour’ of the springs, when their discharge is not affected by an earthquake. Anomalies to the normal hydrometric curves are defined, and correlated to small (M < 3.5) earthquakes along the Garni fault. We propose that the circulation of underground water in the area around the fault depends largely on the fracture pattern of the basalts and the aquifer basement, as pointed out from field observations. Changes in spring discharges are explained by variations in the state of stress around the Garni fault, induced by the alternation of elastic strain and stick-slip movement on the fault, and by creep far from the fault. A model of stress distribution is proposed which explains changes in fracture charateristics before and after earthquakes. © Elsevier, Paris     

Intercrystalline cation partitioning between minerals of the triplite-zwieselite-magniotriplite and the triphylite-lithiophilite series in granitic pegmatites

Minerals of the triphylite-lithiophilite, Li(Fe, Mn)PO₄, and the triplite-zwieselite-magniotriplite series, (Mn, Fe, Mg)₂PO₄F, occur in the late stage period of pegmatite evolution. Unfortunately, neither are the genetic relationships between these phosphates fully understood nor are thermodynamic data known. Consequently, phosphate associations and assemblages from 8 granitic pegmatites — Clementine II, Rubicon II and III, and Tsaobismund (Namibia); Hagendorf-Süd and Rabenstein (Germany); Valmy (France); Viitaniemi (Finland) — have been tested for compositional zoning and intercrystalline partitioning of main elements by electron microprobe techniques. Although the selected pegmatites display varying degrees of fractionation, and the intergrowth textures indicate different genetic relationships between the phosphates, the plots of mole fractions X _Fe=Fe/(Fe+Mn+Mg+Ca), X _Mn=Mn/(Fe+Mn+Mg+Ca), and X _Mg=Mg/(Fe+Mn+Mg+Ca) can be fitted relatively well with smooth curves in Roozeboom diagrams. Their deviations from symmetrical distribution curves are mainly dependent upon X _Mg or X _Ca, and upon non-ideal solutions. Surprisingly small differences between the partition coefficients were detected for intergrowths of different origin. However, the partitioning of shared components among coexisting phases is clearly dependent upon the conditions of formation. Compositional zoning is observed only when both Fe–Mn phosphates are intergrown mutually or with other Fe–Mn–Mg mineral solid-solutios. Thus, the zoning does not seem to be due to continuous crystallization, but to later diffusion processes. The triplite structure has preference for Mn, Mg, and Ca, while Fe prefers minerals of the triphylite series. A quantification of main element fractionation between minerals of the triphylite and the triplite series is possible in the cases where diffusion can be excluded. For the Fe/(Fe+Mn) ratios of core compositions an equation with a high correlation coefficient (R=0.988) was determined: Fe/(Fe+Mn)_Tr=[Fe/(Fe+Mn)_Li]/{2.737-(1.737)[Fe/(Fe+Mn)_Li]} (Tr=triplite series, Li=triphylite series). Consequently, the Fe/(Fe+Mn) ratio of the triplite series can now also be used in the interpretation of pegmatite evolution, just like that of the triphylite series which has been successfully applied in the past.     

Experimental constraints on ultrapotassic magmatism from the Bohemian Massif (durbachite series, Czech Republic)

The equilibrium phase relations of a mafic durbachite (53 wt.% SiO₂) from the Třebíč pluton, representative of the Variscan ultrapotassic magmatism of the Bohemian Massif (338–335 Ma), have been determined as a function of temperature (900–1,100°C), pressure (100–200 MPa), and H₂O activity (1.1–6.1 wt.% H₂O in the melt). Two oxygen fugacity ranges were investigated: close to the Ni–NiO (NNO) buffer and 2.6 log unit above NNO buffer (∆NNO + 2.6). At 1,100°C, olivine is the liquidus phase and co-crystallized with phlogopite and augite at 1,000°C for the whole range of investigated pressure and water content in the melt. At 900°C, the mineral assemblage consists of augite and phlogopite, whereas olivine is not stable. The stability field of both alkali feldspar and plagioclase is restricted to low pressure (100 MPa) at nearly water-saturated conditions (<3–4 wt.% H₂O) and T < 900°C. A comparison between experimental products and natural minerals indicates that mafic durbachites have a near-liquidus assemblage of olivine, augite, Ti-rich phlogopite, apatite and zircon, followed by alkali feldspar and plagioclase, similar to the mineral assemblage of minette magma. Natural amphibole, diopside and orthopyroxene were not reproduced experimentally and probably result from sub-solidus reactions, whereas biotite re-equilibrated at low temperature. The crystallization sequence olivine followed by phlogopite and augite reproduces the sequence inferred in many mica-lamprophyre rocks. The similar fractionation trends observed for durbachites and minettes indicate that mafic durbachites are probably the plutonic equivalents of minettes and that K- and Mg-rich magmas in the Bohemian Massif may have been generated from partial melting of a phlogopite–clinopyroxene-bearing metasomatized peridotite. Experimental melt compositions also suggest that felsic durbachites can be generated by simple fractionation of a more mafic parent and mixing with mantle-derived components at mid crustal pressures.     

Apports de la méthode sismique réflexion haute résolution à l'identification des structures profondes des formations tertiaires en Médoc (Gironde,France) : implications hydrogéologiques

Near Bordeaux (France), the Oligocene aquifer is a potential target for drinking water supply. A high-resolution seismic campaign and several exploration wells helped to clarify the geometry of this formation and, as a consequence, the Medoc Tertiary aquifers. The major information extracted from these new data is the existence of a soft deformation inducing two different deposit areas, showing different hydrogeological characteristics (thickness, type, hydraulic properties, etc.). The presence of an erosional gap area affecting the Oligocene formations lead us to propose a new image of groundwater flow in the area, in the context of a predicted intensive exploitation of this resource. To cite this article: F. Larroque, A. Dupuy, C. R. Geoscience 336 (2004).