The occurrence and geochemistry of arsenic in groundwaters of the Newark basin of Pennsylvania

Elevated As concentrations in groundwater in the eastern United States have been recognized predominantly in the accretionary geologic terranes of northern New England. A retrospective examination of more than 18,000 existing groundwater samples from the Pennsylvania Department of Environmental Protection (PA DEP) Drinking Water and Sampling Information System database indicates that elevated groundwater As concentrations occur throughout the northern half of the Piedmont Province of Pennsylvania. Chemical analyses of 53 samples collected in 2005 from drinking water wells in this area all had detectable As, and 23% of these samples contained elevated (>133 nmol/L or >10 μg/L) concentrations of As. Elevated concentrations of As in the groundwater samples were most common in the Mesozoic sedimentary strata composed of sandstone and red mudstone with interbedded gray shale, and gray to black siltstone and shale. Arsenic was typically not elevated in groundwater of diabase intrusions of the Newark Basin or in crystalline and calcareous aquifers to the north of the Newark Basin. Geochemical parameters such as pH and oxidation–reduction potential can indicate mobility mechanisms of As in some regions. In this area, measured groundwater conditions were predominantly oxidizing (Eh > +50 mV), and more than 85% of samples contained arsenate as the dominant As species. Variations in pH were strongly correlated to the As concentration, with highest As concentrations observed at pH values greater than 6.4. The original source of As is most likely the black and gray shales that contain some arsenian pyrite with groundwater concentrations likely to be controlled by adsorption/desorption reactions with Fe oxides in the red mudstone aquifer materials.     

Cloning of a chub metallothionein cDNA and development of competitive RT-PCR of chub metallothionein mRNA as a potential biomarker of heavy metal exposure

Metallothionein has been assayed in a range of aquatic animal tissues as an indicator of metal exposure. We sequenced chub (Leuciscus cephalus) metallothionein cDNA which showed over 90% homology to common carp, goldfish and stone loach and 77% homology to rainbow trout sequences for metallothionein. We then used the extended primer method to develop an accurate quantitative competitive RT-PCR assay for metallothionein mRNA. RT-PCR was used to measure metallothionein mRNA in feral chub from a range of field sites, with different levels of heavy metal pollution, in the West Midlands, UK. Measurements were complemented by analysis of liver and gill metallothionein protein by capillary electrophoresis. There was no significant difference in the metallothionein protein levels between fish of different rivers and there was no evidence of elevation of mRNA at the sites of highest metal exposure. The level of metal exposure (e.g. zinc, nickel and cadmium each ranging between 15 and 28 microg/l ) at the pH (7.5-8.5) of these rivers appears insufficient to elevate hepatic or gill metallothionein in chub. A lack of elevation of hepatic metallothionein mRNA in chub exposed to zinc, copper and manganese for 24 h and 10 days in the laboratory also suggests a non-responsiveness of this species.     

A Block-Based Theoretical Model Suited to Gravitational Sliding

An original theoretical model has been devised to simulate mass flow over hill slopes due to gravitational sliding. The sliding mass is discretized into a sequence of contiguous blocks which are subjected to gravitational forces, to bottom friction and to surface resistance stresses that are generally negligible for subaerial flows, but are relevant for submarine slides. The blocks interact with each other while sliding down the hill flanks because of internal forces that dissipate mechanical energy and produce a momentum exchange between the individual blocks, yet conserving the total momentum of the mass. Internal forces are expressed in terms of interaction coefficients depending on the instantaneous distance between the block centers of mass, which is a measure of the deformation experienced by the blocks: the functional dependence includes three parameters, namely the interaction intensity ¯, the deformability parameter and the shape parameter , by means of which a wide range of interaction types can be fully accounted for. The time integration is performed numerically by solving the equations for the block velocities and positions at any time ti by means of the block accelerations at the previous time t_i-1, and by subsequently updating the block accelerations, which allows to proceed iteratively to the following times. The model has been tested against laboratory results available from literature and by means of several numerical experiments involving a simplified geometry both for the sliding body and the basal surface, with the purpose of clarifying the influence of the model parameters on the slide dynamics. The model improves the performance of the existing kinematic models for slides, moreover preserving an equivalent numerical simplicity. Future applications and possible improvements of this model are suggested.     

Responses of resident marsh fishes to stages ofPhragmites australis invasion in three mid Atlantic estuaries

Modification of brackish marshes by nonindigenousPhragmites australis has occurred across a broad geographical area in eastern North America. Among its effects on marsh processes,Phragmites may be increasingly unfavorable to marsh surface fishes as its invasion progresses within an estuary. We assessed the effect of thePhragmites invasion on resident marsh surface fishes by examining the population response ofFundulus heteroclitus (mummichog, 5–48 mm TL) andF. luciae (spotfin killifish, 5–41 mm TL) to four distinct invasion stages in three estuaries of the U.S. mid Atlantic region (New Jersey, Delaware, and Maryland). We documented precipitous declines in mean catch per unit effort ofF. heteroclitus in pit traps from natural marsh (51.6), through initial (33.8), early (12.3), and late invasion stages (2.4) across all sites. A similar pattern was documented forF. luciae, with mean catch per unit effort in pit traps declining from natural marsh (48.9), through initial (39.1), early (9.3), and late invasion stages (2.7). Population structure of both species also changed somewhat across invasion stages such that we collected a narrower size range of individuals of both species from late invasion stages. Patterns suggest that as thePhragmites invasion progresses, there is a decline in habitat function for larval and juvenileF. heteroclitus and an increased risk of extirpation ofF. luciae from brackish marshes along the east coast of the U.S.     

Atmospheric nitrogen inputs into the North Sea: effect on productivity

The ANICE (Atmospheric Nitrogen Inputs into the Coastal Ecosystem) project addressed the atmospheric deposition of nitrogen to the North Sea, with emphasis on coastal effects. ANICE focused on quantifying the deposition of inorganic nitrogen compounds to the North Sea and the governing processes. An overview of the results from modelling and experimental efforts is presented. They serve to identify the role of the atmosphere as a source of biologically essential chemical species to the marine biota. Data from the Weybourne Atmospheric Observatory (UK) are used to evaluate the effect of short episodes with very high atmospheric nitrogen concentrations. One such episode resulted in an average deposition of 0.8 mmol N m⁻² day⁻¹, which has the potential to promote primary productivity of 5.3 mmol C m⁻² day⁻¹. This value is compared to long-term effects determined from model results. The total calculated atmospheric deposition to the North Sea in 1999 is 948 kg N km⁻¹, i.e. 0.19 mmol N m⁻² day⁻¹ which has the potential to promote primary productivity of 1.2 mmol C m⁻² day⁻¹. Detailed results for August 1999 show strong gradients across the North Sea due to adjacent areas where emissions of NO_x and NH₃ are among the highest in Europe. The average atmospheric deposition to the southern part of the North Sea in August 1999 could potentially promote primary production of 2.0 mmol C m⁻² day⁻¹, i.e. 5.5% of the total production at this time of the year in this area of the North Sea. For the entire study area the atmospheric contribution to the primary production per m² is about two-third of this value. Most of the deposition occurs during short periods with high atmospheric concentrations. This atmospheric nitrogen is almost entirely anthropogenic in origin and thus represents a human-induced perturbation of the ecosystem.     

A rain on snow climatology and temporal analysis for the eastern United States

ABSTRACT

Rain-on-snow (ROS) has the potential to produce devastating floods by enhancing runoff from snowmelt. Although a common phenomenon across the eastern United States, little research has focused on ROS in this region. This study used a gridded observational snow dataset from 1960–2009 to establish a comprehensive seasonal climatology of ROS for this region. Additionally, different rain and snow thresholds were compared while considering temporal trends in ROS occurrence at four grid cells representing individual locations. Results show most ROS events occur in MAM (March-April-May). ROS events identified with rainfall >1 cm are more frequent near the east coast and events identified with >1 cm snow loss are more common in higher latitudes and/or elevations. Decreasing trends in DJF (December-January-February) ROS events were identified near the coastal areas, with increasing trends in the northern portion of the domain. Significant decreasing trends in MAM ROS are likewise present on a regional scale. Factors playing a role in snowpack depth and rainfall, such as movement of storm tracks in this region, should be considered with future work to discern mechanisms causing the changes in ROS frequency.     

Large wood transport modelling by a coupled Eulerian–Lagrangian approach

The paper discusses a model which predicts the trajectory of floating rigid bodies and may be applied to compute the motion of woody “debris” mobilized during floods. The model couples a Discrete Element (DE) Lagrangian approach for the calculation of motion of rigid bodies with the Eulerian solution of the shallow water equations (SWE), in order to simulate the transport of a cylinder in a two-dimensional stream. It differs from existing models since it is based on a dynamic approach, adapting the Basset–Boussinesq–Oseen equation. In a first step, forces are computed from flow and log velocities; then, the equations of dynamics are solved to model the planar roto-translation of the body. Model results and physical reliability are clearly affected by the values of the drag and side coefficients, especially since logs, modelled as cylinders, are able to change their orientation towards the flow. Experimental studies to evaluate drag and side coefficients can be found in the literature for a submerged cylinder, with various orientations. To extend such results to the case of a floating log, the authors performed a series of laboratory tests on partially submerged cylinders, implementing the outcomes in the proposed DE-SWE model. The coupled model is validated against existing laboratory data concerning spheres and wooden cylinder transport.     

Petrographic constraints on models of intergranular pressure solution in quartzose sandstones

Petrographic and SEM observations on 478 samples of six quartzose sandstones provide a data base that can be used to evaluate the role of intergranular pressure solution (IPS) in sandstone diagenesis and to constrain predictive models of the pressure solution process. SEM examination of grain contacts that have experienced pressure solution suggests that IPS occurs at the interior portions of contacts where the greatest stress is concentrated and that granulation of quartz grains at points of contact may contribute to the process. The chemical compaction fabrics that result from IPS suggest that the process is most commonly induced by effective lithostatic stress and that the resulting strain is uniaxial.Numerous geological variables influence IPS. Grain size exerts a fundamental influence, with finer grained samples experiencing more IPS than coarser grained samples. On both local and regional scales, IPS is inhibited by poor sorting, an abundance of ductile grains, the presence of “shallow” cement, slow rates of shallow burial, and overpressured conditions. In contrast, IPS is enhanced by the presence of illite grain coatings, increased maximum burial depth, rapid rates of shallow burial, longer times spent at great depths, higher temperatures, and high volumes and rates of fluid flow.Silica budgets indicate that some of the analyzed sandstones approximate mass balance whereas others have exported silica. Calculations of fluid flow requirements indicate that advanced stages of IPS are favored by high volume, high velocity fluid flow. Such flow can occur as a result of uplift of basin margins, which is typical of foreland and intractonic basins.     

Late Quaternary sedimentation on the Leidy Creek fan, Nevada–California: geomorphic responses to climate change

Well-dated surface and subsurface deposits in semiarid Fish Lake Valley, Nevada and California, demonstrate that alluvial-fan deposition is strongly associated with the warm dry climate of the last two interglacial intervals, and that fans were stable and (or) incised during the last glaciation. Fan deposition was probably triggered by a change from relatively moist to arid conditions causing a decrease in vegetation cover and increases in flash floods and sediment yield. We think that this scenario applies to most of the other valleys in the southern Basin and Range. Radiocarbon, tephra, and a few thermoluminescence and cosmogenic ages from outcrops throughout Fish Lake Valley and from cores on the Leidy Creek fan yield ages of >100–50 ka and 11–0 ka for the last two periods of alluvial-fan deposition. Mapping, coring and shallow seismic profiling indicate that these periods were synchronous throughout the valley and on the proximal and distal parts of the fans. From 50 to 11 ka, fan deposition ceased, a soil formed on the older alluvium and the axial drainage became active as runoff and stream competence increased. Slow deposition due to sheet flow or aeolian processes locally continued during this interval, producing cumulic soil profiles. The soil was buried by debris-flow sediment beginning at about 11 ka, coincident with the onset of relatively dry and warm conditions in the region. However, ground-water discharge maintained a large freshwater marsh on the valley floor throughout the Holocene. Pulses of deposition during the Holocene are recorded in the marsh and fan deposits; some pulses coincided with periods of or transitions to warm, dry climate indicated by proxy climate records, whereas others may reflect local disturbances associated with volcanism and fires. Within the marsh deposits, much of the clastic material is probably desert loess. In addition, the deposition of coppice dunes within the fan deposits coincides with two dry periods during the late Holocene.