Mapping of suspended sediments using site specific seasonal algorithms

This article reports a preliminary work in which two site specific seasonal algorithms have been proposed for estimating the suspended sediments concentration (SSC) from the digital numbers recorded on Indian Remote sensing Satellite, IRS-P4 Ocean Colour Monitor (OCM) sensor. For estimation of SSC, the proposed algorithms utilize dark pixel deduction atmospheric correction technique. The computations are performed with respect to north east monsoon phase situations of Palk Strait coastal stretch. The algorithms performance was satisfactory during the north east monsoon period. Although the results obtained cannot be generalized, we suggest that the authority of proposed algorithms can be extended to other seasons with the addition of more temporal experimental validation data sets and with numeric constants adjusted to present existing conditions. (As this area was severely affected by Tsunami, it may have dissimilar conditions at present).     

New insights on petrography and geochemistry of impactites from the Lonar crater,India

The Lonar impact crater, India, is one of the few known terrestrial impact craters excavated in continental basaltic target rocks (Deccan Traps, ~65 Ma). The impactites reported from the crater to date mainly include centimeter‐ to decimeter‐sized impact‐melt bombs, and aerodynamically shaped millimeter‐ and submillimeter‐sized impact spherules. They occur in situ within the ejecta around the crater rim and show schlieren structure. In contrast, non–in situ glassy objects, loosely strewn around the crater lake and in the ejecta around the crater rim do not show any schlieren structure. These non–in situ fragments appear to be similar to ancient bricks from the Daityasudan temple in the Lonar village. Synthesis of existing and new major and trace element data on the Lonar impact spherules show that (1) the target Lonar basalts incorporated into the spherules had undergone minimal preimpact alteration. Also, the paleosol layer as preserved between the top‐most target basalt flow and the ejecta blanket, even after the impact, was not a source component for the Lonar impactites, (2) the Archean basement below the Deccan traps were unlikely to have contributed material to the impactite parental melts, and (3) the impactor asteroid components (Cr, Co, Ni) were concentrated only within the submillimeter‐sized spherules. Two component mixing calculations using major oxides and Cr, Co, and Ni suggest that the Lonar impactor was a EH‐type chondrite with the submillimeter‐sized spherules containing ~6 wt% impactor components.     

Petrography and major element geochemistry of the Permo-Triassic sandstones, central India: Implications for provenance in an intracratonic pull-apart basin

Detrital mode, composition of feldspars and heavy minerals, and major element chemistry of sandstones from the Permo-Triassic succession in the intracratonic Satpura Gondwana basin, central India have been used to investigate provenance. The Talchir Formation, the lowermost unit of the succession, comprises glacio-marine and glacio-fluvial deposits. The rest of the succession (base to top) comprising the Barakar, Motur, Bijori, Pachmarhi and Denwa formations, largely represent variety of fluvial depositional systems with minor fluvio-deltaic and fluvio-lacustrine sedimentation under a variety of climatic conditions including cold, warm, arid, sub-humid and semi-arid. QFL compositions of the sandstones indicate a predominantly continental block provenance and stable cratonic to fault-bounded basement uplift tectonic setting. Compositional maturity of sandstones gradually increases upwards from the Early Permian Talchir to the Middle Triassic Denwa but is punctuated by a sharp peak of increased maturity in the Barakar sandstones. This temporal change in maturity was primarily controlled by temporal variation in fault-induced basement uplift in the craton and was also influenced by climatic factors. Plots of different quartz types suggest plutonic source rocks for the Talchir sandstones and medium-to high-rank metamorphic plus plutonic source rocks for the younger sandstones. Composition of alkali feldspars in the Permo-Triassic sandstones and in different Precambrian rocks suggests sediment derivation from felsic igneous and metasedimentary rocks. Compositions of plagioclase in the Talchir and Bijori sandstones are comparable with those of granite, acid volcanic and metasedimentary rocks of the Precambrian basement suggesting the latter as possible source. Rare presence of high-K plagioclase in the Talchir sandstones, however, indicates minor contribution from volcanic source rock. Exclusively plagioclase-bearing metasedimentary rock, tonalite gneiss and mafic rocks are the probable sources of plagioclase in the Upper Denwa sandstones. Quartz-rich nature of the sandstones, predominance of K-feldspar over plagioclase and albite rich character of plagioclase in the sandstones is consistent with deposition in an intracratonic, pull-apart basin like the Satpura Gondwana basin. Composition of garnet and its comparison with that from the Precambrian basement rocks suggests mica-schist and amphibolite as possible sources. Predominance of dravite variety of tourmaline in the Permian sandstones suggests sediment supply from metasedimentary rocks. Presence of both dravite and schorl variety of tourmaline in subequal amount in the Triassic sandstones indicates sediment derivation from granitic and metasedimentary rocks. However, schorl-bearing rocks are absent in the basement complex of the study area. A-CN-K plot suggests granites, acid volcanic rock and meta-sediments of the basement as possible sources of the Talchir sandstones and metasedimentary rocks for the Barakar to Pachmarhi sandstones. The Denwa sandstones were possibly derived from K-feldspar-free, plagioclase-bearing metasediments, mafic rocks and tonalite gneiss. Chemical Index of Alteration (CIA) values suggest low intensity source rock weathering for the Talchir sandstones and higher intensity source rock weathering for the others. Various bivariate plots of major oxides composition of the sandstones suggest passive to active continental margin setting and even arc tectonic setting for a few samples.     

Deformation Modulus of Fly Ash Modified with Lime and Gypsum

Deformation modulus of fly ash is one of the most important mechanical properties generally used in different design problems and also as an input parameter to sophisticated numerical techniques employed to assess the response of different structures resting on fly ash fill or embankment made of fly ash. Deformation modulus is usually expressed in terms of compressive strength. This paper presents the deformation modulus of fly ash modified with lime alone or in combination with gypsum at different strain levels. The values of deformation modulus obtained from both unconfined compression test and unconsolidated undrained triaxial test results are presented herein. The specimens for unconfined compression test and for undrained triaxial tests were cured up to 90 and 28 days, respectively. The effects of addition of lime (4–10%) and gypsum (0.5 and 1.0%) on the deformation modulus of class F fly ash are highlighted. With addition of lime and gypsum, the class F fly ash achieved the deformation modulus in the range of 190 MPa in UCS test and up to 300 MPa in triaxial test specimens tested under all round pressure of 0.4 MPa. Based on the present test results empirical relationships are developed to estimate deformation modulus of modified fly ash from unconfined compressive strength and relationships between initial tangent modulus and secant modulus at different strain levels are also developed.     

Seismic interference of two nearby horizontal strip anchors in layered soil

In the present analysis, an attempt is made to explore the seismic response of two nearby horizontal strip anchors embedded in non-homogenous c-? soil deposit at different depths. The analysis is performed by using two-dimensional finite-element software PLAXIS 2D. Each anchor carries equal static safe-working load without violating the ultimate uplift capacity under static condition. The soil is assumed to obey the Mohr?CCoulomb failure criterion. The behavior of single isolated anchor subjected to an earthquake loading is determined first to study the interference effect between two anchors. The horizontal acceleration response obtained from the Loma Prieta Gilroy Earthquake (1989) is considered as the input excitation in the analysis. A parametric study is performed by varying the clear spacing (S) between the anchors at different embedment ratios (??). The magnitude of vertical displacement, shear stress, and shear strain developed at different locations of the failure domain is determined for different clear spacings between the anchors.     

Variation in groundwater levels and water quality in Chhatna Block, Bankura district, West Bengal — a GIS approach

Ground water levels and quality in Chhatna Block of West Bengal were studied based on different indices for irrigation and drinking purposes. A detailed hydrogeological investigation was carried out to have an overall idea of the aquifer system of the area. The ground water occurs under shallow to moderately deep water table condition. The groundwater is stored mostly in the weathered residuum and fractured — hard rock. Sodium absorption ratio (SAR), soluble sodium percentage (SSP), residual sodium bi-carbonate (RSBC), electrical conductance (EC), magnesium adsorption ratio (MAR) Kelly’s ratio (KR), total hardness (TH), permeability index (PI) were calculated as derived parameters, to investigate the ionic toxicity. From the results of chemical analysis, it was revealed that the values of Sodium Adsorption Ratio indicate that, ground water of the area falls under the category of low sodium hazard. So, there was neither salinity nor toxicity problem of irrigation water, and hence the ground water can safely be used for long-term irrigation. Plotting of analytical results of the groundwater collected from different areas in Piper’s trilinear diagram (1944) indicate that, the waters of the study area fall under fresh and sulphate rich region of the rhombus.     

Kinematics of the Gondwana basins of peninsular India

The Gondwana successions (1–4 km thick) of peninsular India accumulated in a number of discrete basins during Permo-Triassic period. The basins are typically bounded by faults that developed along Precambrian lineaments during deposition, as well as affected by intrabasinal faults indicating fault-controlled synsedimentary subsidence. The patterns of the intrabasinal faults and their relationships with the respective basin-bounding faults represent both extensional and strike-slip regimes. Field evidence suggests that preferential subsidence in locales of differently oriented discontinuities in the Precambrian basement led to development of Gondwana basins with varying, but mutually compatible, kinematics during a bulk motion, grossly along the present-day E–W direction. The kinematic disparity of the individual basins resulted due to different relative orientations of the basement discontinuities and is illustrated with the help of a simple sandbox model. The regional E–W motion was accommodated by strike-slip motion on the transcontinental fault in the north.     

Dinosaur coprolites from the Late Cretaceous (Maastrichtian) Lameta Formation of India: isotopic and other markers suggesting a C3plant diet

A single locality of the Late Cretaceous (Maastrichtian) Lameta Formation at Pisdura in Central India has yielded a large number of coprolites attributed to titanosaurian dinosaurs. Internally the coprolites are dark grey and contain abundant plant tissues and other organic materials. The plant tissues are mostly of gymnospermous origin. In addition, remains of bacterial colonies, fungal spores and algae are seen in the macerated fraction under scanning electron microscope. The dark grey appearance is probably attributable to fine-grained organic matter within voids in tracheids or xylem. The average ¹³C/¹²C ratio of the organic matter in the coprolites is -24‰ (relative to PDB) suggesting that plants of C₃type were the main diet of their producers. A comparison of δ¹⁵N value (about 4‰ w.r.t. air) of the coprolites with that of faecal matter of modern herbivores and carnivores suggests that gut fermentation may not have been an active mechanism in the digestion process of titanosaurs.     

Felsic tuff from Rutland Island — A pyroclastic flow deposit in Miocene-sediments of Andaman-Java subduction complex

The bedded felsic tuff exposed in Rutland Island, Andaman, consists of two facies:

Some regional indicators of the Tertiary–Quaternary geodynamics in the paleocoastal part of the Bengal basin (India)

Sedimentary processes in the paleocoastal part of the Bengal basin that occured in the Tertiary and Quaternary have been addressed. Three indicators were used: sedimentary bedding forms, microstructure of the sediment, and trace fossils. Various forms of sedimentary structures developed under the influence of dynamic geomorphic processes in the study area in the Quaternary. The microstructure analysis of the sedimentary materials was made by two methods: microphotography and Digital Color Analysis (DCA). The microstructure analysis shows that the geomorphic process remained very dynamic in the Quaternary, influencing the form, thickness, and mineral composition of the sediment strata. The enrichment of the sediments in heavy minerals evidences either oscillating or combined flow sedimentation, while under stable conditions light-mineral deposition took place. The digital data of microfabric study by the DCA method also show that larger particles deposited in the oscillating or high-flow environment and evidence a greater amount of heavy minerals like ferruginous materials. Trace fossils found in the sediments of this area also strongly support the concept that the environment remained dynamic during the Tertiary and Quaternary. The Late Tertiary deposition shows that, during these periods, the sediments were transported from tide-dominated marine coast with low flow energy, which is typical of hot and humid conditions. From Late Tertiary to Early Quaternary, the macrotidal coast became mesotidal (wave-dominated). The second phase is the Middle Pleistocene, when the environment was stable, favoring the continuous deposition of finer particles under low- to medium-flow energy conditions. The third phase, the Recent, is marked by the shoreline shift and modification of the environment. In the Early–Middle Holocene, the shoreline started to shift, which modified the geomorphic conditions of this place from coastal to estuarine and, finally, inland fluvial.