The D-CIXS X-ray mapping spectrometer on SMART-1

The D-CIXS Compact X-ray Spectrometer will provide high quality spectroscopic mapping of the Moon, the primary science target of the ESA SMART-1 mission. D-CIXS consists of a high throughput spectrometer, which will perform spatially localised X-ray fluorescence spectroscopy. It will also carry a solar monitor, to provide the direct calibration needed to produce a global map of absolute lunar elemental abundances, the first time this has been done. Thus it will achieve ground breaking science within a resource envelope far smaller than previously thought possible for this type of instrument, by exploiting two new technologies, swept charge devices and micro-structure collimators. The new technology does not require cold running, with its associated overheads to the spacecraft. At the same time it will demonstrate a radically novel approach to building a type of instrument essential for the BepiColombo mission and potential future planetary science targets.     

Axisymmetric Simulations of Pulsar Wind Nebulae with a New Central-Type Scheme for Relativistic MHD

A third-order shock-capturing numerical scheme for three-dimensional special relativistic magnetohydrodynamics (3-D RMHD) is presented. Due to the difficulties in developing exact or even approximate Riemann solvers in RMHD, a simple two-speed central-type solver that requires the knowledge of only the local fast magnetosonic velocities is employed. First results from axisymmetric simulations of Pulsar Wind Nebulae (PWNe) are finally presented. We show that when the wind magnetization is high enough, magnetic hoop stresses at work downstream of the termination shock are able to collimate a polar jet-like outflow, with velocities similar to those observed in the Crab and Vela Nebulae (v ≈ 0.5-0.7c).     

The pairwise velocity dispersion of galaxies: effects of non-radial motions

I discuss the effect of non-radial motions on the small-scale peculiar pairwise velocity dispersions (PVD) of galaxies in a cold dark matter (CDM) model and calculate the PVD for the SCDM model by means of the refined cosmic virial theorem (CVT), taking account of non-radial motions by means of the Del Popolo & Gambera model. I compare the results of the present model with the data from Davis & Peebles, the IRAS value at 1  h ⁻¹ Mpc of Fisher et al. and Marzke et al. I show that while the SCDM model disagrees with the observed values, as pointed out by several authors, taking account of non-radial motions produces smaller values for the PVD. At r ≤1  h ⁻¹ Mpc the result is in agreement with Bartlett & Blanchard. In the light of this last paper, the result may be also read as a strong dependence of the CVT prediction on the model chosen to describe the mass distribution around galaxies, suggesting that the CVT cannot be taken as a direct evidence for a low-density Universe. Similarly to what is shown by Del Popolo & Gambera and Del Popolo et al., the agreement of our model to the observational data is because of a scale-dependent bias induced by the presence of non-radial motions. As the assumptions on which CVT is based have been questioned by several authors, I also calculated the PVD using the redshift distortion in the redshift-space correlation function, ξ _z( r _p, π), and compared it with the PVD measured from the Las Campanas Redshift Survey by Jing et al. The result confirms that non-radial motions influence the PVD making them agree better with the observed data.     

A focal plane detector design for a wide-band Laue-lens telescope

The energy range above 60 keV is important for the study of many open problems in high energy astrophysics such as the role of Inverse Compton with respect to synchrotron or thermal processes in GRBs, non thermal mechanisms in SNR, the study of the high energy cut-offs in AGN spectra, and the detection of nuclear and annihilation lines. Recently the development of high energy Laue lenses with broad energy bandpasses from 60 to 600keV have been proposed for a Hard X ray focusing Telescope (HAXTEL) in order to study the X-ray continuum of celestial sources. The required focal plane detector should have high detection efficiency over the entire operative range, a spatial resolution of about 1mm, an energy resolution of a few keV at 500keV and a sensitivity to linear polarization. We describe a possible configuration of the focal plane detector based on several CdTe/CZT pixelated layers stacked together to achieve the required detection efficiency at high energy. Each layer can operate both as a separate position sensitive detector and polarimeter or work with other layers to increase the overall photopeak efficiency. Each layer has a hexagonal shape in order to minimize the detector surface required to cover the lens field of view. The pixels would have the same geometry so as to provide the best coupling with the lens point spread function and to increase the symmetry for polarimetric studies.     

A seismic source zone model for the seismic hazard assessment of the Italian territory

We designed a new seismic source model for Italy to be used as an input for country-wide probabilistic seismic hazard assessment (PSHA) in the frame of the compilation of a new national reference map.

We started off by reviewing existing models available for Italy and for other European countries, then discussed the main open issues in the current practice of seismogenic zoning.

The new model, termed ZS9, is largely based on data collected in the past 10 years, including historical earthquakes and instrumental seismicity, active faults and their seismogenic potential, and seismotectonic evidence from recent earthquakes. This information allowed us to propose new interpretations for poorly understood areas where the new data are in conflict with assumptions made in designing the previous and widely used model ZS4.

ZS9 is made out of 36 zones where earthquakes with M_w > = 5 are expected. It also assumes that earthquakes with M_w up to 5 may occur anywhere outside the seismogenic zones, although the associated probability is rather low. Special care was taken to ensure that each zone sampled a large enough number of earthquakes so that we could compute reliable earthquake production rates.

Although it was drawn following criteria that are standard practice in PSHA, ZS9 is also innovative in that every zone is characterised also by its mean seismogenic depth (the depth of the crustal volume that will presumably release future earthquakes) and predominant focal mechanism (their most likely rupture mechanism). These properties were determined using instrumental data, and only in a limited number of cases we resorted to geologic constraints and expert judgment to cope with lack of data or conflicting indications. These attributes allow ZS9 to be used with more accurate regionalized depth-dependent attenuation relations, and are ultimately expected to increase significantly the reliability of seismic hazard estimates.     

Leaching mechanisms of oxyanionic metalloid and metal species in alkaline solid wastes: A review

An overview is presented on possible mechanisms that control the leaching behaviour of the oxyanion forming elements As, Cr, Mo, Sb, Se, V and W in cementituous systems and alkaline solid wastes, such as municipal solid waste incinerator bottom ash, fly ash and air pollution control residues, coal fly ash and metallurgical slags. Although the leachability of these elements generally depends on their redox state, speciation measurements are not common. Therefore, experimental observations available in the literature are combined with a summary of the thermal behaviour of these elements to assess possible redox states in freshly produced alkaline wastes, given their origin at high temperature. Possible redox reactions occurring at room temperature, on the other hand, are reviewed because these may alter the initial redox state in alkaline wastes and their leachates. In many cases, precipitation of oxyanions as a pure metalate cannot provide a satisfactory explanation for their leaching behaviour. It is therefore highly likely that adsorption and solid solution formation with common minerals in alkaline waste and cement reduce the leachate concentration of oxyanions below pure-phase solubility.     

Contribution of the SISCam Web-based GIS to the seismotectonic study of Campania (Southern Apennines): an example of application to the Sannio-area

In this article the implementation and potential of the Seismotectonic Information System of the Campania Region (SISCam) are described, in particular an application of this Web-based GIS system to the seismotectonic analysis of the Sannio area (Southern Apennines) is performed. WEB-GIS technologies greatly contribute to both the environmental monitoring and the disaster management of areas affected by high natural risks. Specifically the SISCam system has been developed with the aim of providing easy access and fast diffusion, through Internet technology, of the most significant geological, geophysical, and territorial data relative to the Campania Region. The Sannio area has been selected as our application example because it is among the most active seismic regions in Italy. This portion of the Southern Apennines which was hit by the June 5, 1688 strong earthquake (M _W = 6.7, CPTI 1999) and by some low- and moderate-energy seismic sequences (1990–1992, 1997), is characterized by a complex inherited tectonic setting and low-tectonic deformation rates that hide the seismogenic sources position. Since this case study turned out to be complicated, the use of the SIScam WEB-GIS has become indispensable because it allowed us to visualize, integrate and analyze all the data available, in order to obtain an accurate and direct picture of the seismotectonic setting of the area. Moreover, a different approach of data analysis was necessary, due to the lack of up-to-date neotectonic and structural data; therefore, the operation of this GIS system enabled us to process and generate some original informative layers, through image analysis, such as new structural lineaments represented on a map of the potential active faults of the area, which has been the final result of our application, as a contribution to new knowledge about the local seismic risk parameters.     

Seabed Morphology and Pollution Along the Bagnoli Coast (Naples, Italy): a Hypothesis for Environmental Restoration

Abstract. The interaction of coastal and submarine morphology with the hydrodynamic regimes exerts a control on coastal dynamic processes, conditioning the dispersion of sediments and potential pollutants existing in the area. Thus, the study of such parameters is useful in order to define environmental threats. Within the submerged sector of the Bagnoli coast and particularly in the southern part of the investigated area, there are sediment groups composed of very fine sands located in low-energy zones due to wave refraction and diffraction; they can also be found on the sea bottom and on the man-made structures typical of this zone. These areas show high pollutant levels of N, P, Cu, Fe, Mn, Ni, Pb, Zn, Cd, polyaromatic hydrocarbons (PAHs) and polychlorinated bi-phenyls (PCBs). The northern area, a place of high-energy hydrodynamic processes, also shows high concentration levels of pollutants due to the presence of secondary cell circulation.
Morphological research and analysis of textural characteristics of bottom sediments along the Bagnoli coast allowed the actual processes and their evolution in space and time to be defined. It has also been possible to correlate such processes to the seabed morphology system, the wave formations which affect the coast, the complex system of sediment transport, as well as to the man-made interventions in the area. The results of recent chemical analyses of beach sediments and bottom sediments off the Bagnoli coast were also incorporated. They prove the presence of heavy metals, PAHs and PCBs in high and sometimes very high concentrations. Finally, based on the results of research and analyses, a hypothesis for an intervention for environmental restoration has been formulated in order to renaturalise the coast through dredging and treatment of the sand, both on the seabed and on the emerged beach.