Deep-ocean vertical noise directionality

The structure of beam noise measured at the output of a vertical array in a range dependent ocean basin was investigated using the modified wide-angle parabolic equation (PE). Noise sources were distributed throughout the basin, and the field due to each noise source at an array located in the midbasin was calculated. The response of the array to the superposition of the noise sources was found by beamforming. An efficient and direct approach that superimposes the noise sources on the PE field as the field is marched toward the array was developed. Downslope calculations of the midbasin vertical directionality were made between 50 and 400 Hz with this technique. Use of a geoacoustic model shows that the bottom behaves as a low-pass filter     

Incorporating solid solutions in reactive transport equations using a kinetic discrete-composition approach

A new approach is proposed for incorporating solid solution reactions into mass conservation equations describing reaction paths in both closed and open systems. The method is applicable to problems involving advective, dispersive, and diffusive transport in a porous medium. By representing the continuously variable solid solution composition with a discrete set of stoichiometric solids that span composition space, combined with a kinetic formulation of their rates of reaction, a self-determining spatial and temporal evolution of the solid solution concentration and composition is obtained. It is demonstrated that equilibrium of an aqueous solution with a stoichiometric solid derived from a solid solution corresponds to equilibrium of the solid solution itself if and only if equilibrium of the stoichiometric solid is stable. One advantage of this approach is that it is unnecessary to introduce any additional compositional variables to represent the solid solution. Discretization may be over the entire range of composition space, or over some subset depending on the system. A major consequence of the kinetic discrete-composition solid solution representation is that modeling solid solutions is similar to modeling pure mineral phases with the exception of a weighting factor applied to reaction rates of stoichiometric solids corresponding to a common solid solution. With this approach, precipitation leads to a discrete zonation of the solid solution that approximates the continuous variation in composition expected for the actual solid solution. The approach is demonstrated for a hypothetical ideal and non-ideal binary solid solution A_xB_1−xC for a reaction path formulation and reactive transport involving advection and diffusion.     

Countergradient Fluxes of Conserved Variables in the Clear convective and Stratocumulus-topped Boundary Layer: The role of the Entrainment Flux

Large-eddy simulations of a clear convective boundary layer (CBL)and a stratocumulus-topped boundary layer are studied. Bottom-upand a top-down scalars were included in the simulations, and theprinciple of linear superposition of variables was applied toreconstruct the fields of any arbitrary conserved variable.This approach allows a systematic analysis of countergradient fluxesas a function of the flux ratio, which is defined as the ratio betweenthe entrainment flux and the surface flux of the conserved quantity.In general, the turbulent flux of an arbitrary conserved quantityis counter to the mean vertical gradient if the heights where thevertical flux and the mean vertical gradient change sign do notcoincide. The regime where the flux is countergradient is thereforebounded by the so-called zero-flux and zero-gradient heights. Becausethe vertical flux changes sign only if the entrainment flux has anopposite sign to the surface flux, countergradient fluxes arepredominantly found for negative flux ratios. In the CBL the fluxratio for the virtual potential temperature is, to a good approximation,constant, and equal to -0.2. Only if the moisture contribution to thevirtual potential temperature is negligibly small will the flux ratio forthe potential temperature be equal to this value. Otherwise, theflux ratio for the potential temperature can have any arbitrary(negative) value, and, as a consequence, the fluxes for thepotential temperature and the virtual potential temperature willbe countergradient at different heights. As a practical application ofthe results, vertical profiles of the countergradient correction termfor different entrainment-to-surface-flux ratios are discussed.     

Nature of polymerization and properties of silicate melts and glasses at high pressure

The structures of sodium silicate and aluminosilicate glasses quenched from melts at high pressure (6-10 GPa) with varying degrees of polymerization (fractions of nonbridging oxygen) were explored using solid-state NMR [¹⁷O and ²⁷Al triple-quantum magic-angle spinning (3QMAS) NMR]. The bond connectivity in melts among four and highly coordinated network polyhedra, such as ^[4]Al, ^[5,6]Al, ^[4]Si, and ^[5,6]Si, at high pressure is shown to be significantly different from that at ambient pressure. In particular, in the silicate and aluminosilicate melts, the proportion of nonbridging oxygen (NBO) generally decreases with increasing pressure, leading to the formation of new oxygen clusters that include 5- and 6-coordinated Si and Al in addition to 4-coordinated Al and Si, such as ^[4]Si-O-^[5,6]Si, ^[4]Si-O-^[5,6]Al and Na-O-^[5,6]Si. While the fractions of ^[5,6]Al increase with pressure, the magnitude of this increase diminishes with increasing degrees of ambient-pressure polymerization under isobaric conditions. Incorporating the above structural information into models of melt properties reproduces the anomalous pressure-dependence of O²⁻ diffusivity and viscosity often observed in silicate melts.     

The International Laser Ranging Service and its support for IGGOS

The International Laser Ranging Service (ILRS) was established in September 1998 as a service within the IAG to support programs in geodetic, geophysical, and lunar research activities and to provide data products to the International Earth Rotation Service (IERS) in support of its prime objectives. Now in operation for 5 years, the ILRS develops: (1) the standards and specifications necessary for product consistency and (2) the priorities and tracking strategies required to maximize network efficiency. The service collects, merges, analyzes, archives and distributes satellite and lunar laser ranging data to satisfy a variety of scientific, engineering, and operational needs and encourages the application of new technologies to enhance the quality, quantity, and cost effectiveness of its data products. The ILRS works with: (1) the global network to improve station performance; (2) new satellite missions in the design and building of retroreflector targets to maximize data quality and quantity and (3) science programs to optimize scientific data yield. The ILRS Central Bureau maintains a comprehensive web site as the primary vehicle for the distribution of information within the ILRS community. The site, which can be accessed at: http://ilrs.gsfc.nasa.gov is also available at mirrored sites at the Communications Research Laboratory (CRL) in Tokyo and the European Data Center (EDC) in Munich.During the last 2 years, the ILRS has addressed very important challenges: (1) data from the field stations are now submitted hourly and made available immediately through the data centers for access by the user community; (2) tracking on low satellites has been significantly improved through the sub-daily issue of predictions, drag functions, and the real-time exchange of time biases; (3) analysis products are now submitted in SINEX format for compatibility with the other space geodesy techniques; (4) the Analysis Working Group is heavily engaged in Pilot Projects as it works toward an ILRS “standard” global solution and (5) SLR has significantly increased its participation in the International Terrestrial Reference Frame (ITRF) activity, which is important to the success of IGGOS.