SHRIMP U–Pb ages of diagenetic and hydrothermal xenotime from the Archaean Witwatersrand Supergroup of South Africa

SHRIMP dating of xenotime overgrowths on detrital zircon grains can constrain maximum durations since diagenesis and therefore provide minimum dates of sediment deposition. Thus, xenotime dating has significant economic application to Precambrian sediment-hosted ore deposits, such as Witwatersrand Au–U, for which there are no precise depositional ages. The growth history of xenotime in the Witwatersrand Supergroup is texturally complex, with several phases evident. The oldest authigenic xenotime ²⁰⁷Pb/²⁰⁶Pb age obtained in sandstone underlying the Vaal Reef is 2764 ± 5 Myr (1 σ), and most likely represents a mixture of diagenetic and hydrothermal growth. Nevertheless, this represents the oldest authigenic mineral age yet recorded in the sequence and provides a minimum age of deposition. Other xenotime data record a spread of ages that correspond to numerous post-diagenetic thermotectonic events (including a Ventersdorp event at ≈ 2720 Ma) up to the ≈2020 Ma Vredefort event.     

Greenhouse Gas Emissions and Costs over the Life Cycle of Wood and Alternative Flooring Materials

Increased use of wood can substitute more energy demanding products and thus contribute to a long-term solution to the global warming problem. The aim of this article is to provide an empirical study on this substitution impact, its cost-effectiveness, and which methodological assumptions that are of highest importance for the results obtained. We have made a case study where we compare use of various flooring materials. The results show that floor covering in solid oak causes lower greenhouse gas (GHG) emissions than the other materials. The difference can be ranked in the following order, after their potential for reduction in GHG emissions: Carpet in wool, carpet in polyamide, vinyl, and linoleum. At 2% pro anno discount rate, the avoided GHG emission in tons per m³ of oak flooring used is 0.1–1.9 for linoleum, and 11.8–15.5 for wool carpets. Unless the solution in solid oak is on total less expensive over the lifetime of the building, only the price of avoided emissions from a substitution between solid oak and carpet in wool is reasonable, compared to present carbon fees. The assumptions that influence the result most are choice of discount rate, carbon fixation on forest area, and waste handling. Empirical case studies like this indicate GHG emission reduction potentials caused by substitution, but should be complemented by dynamic input/output analyses and econometric studies. To analyse the flow of CO₂ over time, they should also be linked to forest management models.     

Linking gold mineralization to regional-scale drivers of mineral systems using in situ U–Pb geochronology and pyrite LA-ICP-MS element mapping

Proterozoic orogens commonly host a range of hydrothermal ores that form in diverse tectonic settings at different times. However, the link between mineralization and the regional-scale tectonothermal evolution of orogens is usually not well understood, especially in areas subject to multiple hydrothermal events.Regional-scale drivers for mineral systems vary between the different classes of hydrothermal ore, but all involve an energy source and a fluid pathway to focus mineralizing fluids into the upper crust. The Mount Olympus gold deposit in the Proterozoic Capricorn Orogen of Western Australia, was regarded as an orogenic gold deposit that formed at ca. 1738 Ma during the assembly of Proterozoic Australia. However,the trace element chemistry of the pyrite crystals closely resembles those of the Carlin deposits of Nevada,with rims that display solid solution gold accompanied by elevated As, Cu, Sb, Hg, and Tl, surrounding gold-poor cores. New SHRIMP UeP b dating of xenotime intergrown with auriferous pyrite and ore-stage alteration minerals provided a weighted mean~(207) Pb*/~(206) Pb* date of 1769 ± 5 Ma, interpreted as the age of gold mineralization. This was followed by two discrete episodes of hydrothermal alteration at 1727 ± 7 Ma and 1673 ± 8 Ma. The three ages are linked to multiple reactivation of the crustal-scale Nanjilgardy Fault during repeated episodes of intracratonic reworking. The regional-scale drivers for Carlin-like gold mineralization at Mount Olympus are related to a change in tectonic regime during the final stages of the intracratonic 1820 -1770 Ma Capricorn Orogeny. Our results suggest that substantial sized Carlin-like gold deposits can form in an intracratonic setting during regional-scale crustal reworking.     

Crystal structure refinement of chromites from two achondrites,their T‐f(O2) conditions,and implications

Six Cr‐spinel grains from NWA 6077 brachinite‐like and NWA 725 winonaite achondrites have been studied by single‐crystal X‐ray diffraction and structural refinement. From a chemical point of view, spinels from NWA 6077 show Cr/(Cr + Al) (i.e., Cr#) and Mg/(Mg + Fe²⁺) (i.e., Mg#) values similar to other brachinites, while the Cr# of NWA 725 is lower than that of literature winonaites. Spinels from NWA 6077 and NWA 725 meteorites show similar cell edges, while the oxygen positional parameter is rather different being about 0.2629 for NWA 6077 and 0.2622 for NWA 725. Considering both parameters, NWA 725 shows structural features that are close to some terrestrial spinel occurrences as in komatiites, kimberlites, or included in diamonds; those from NWA 6077 show values that have no terrestrial analogs. Olivine‐chromite closure temperature ranges from ~737 to ~765° C for NWA 725, being similar to that of literature winonaites and ~846 to ~884° C for NWA 6077. The logfO₂ ranges from ?19.8 to ?20.5 and ?17.0 to ?17.9 for the two meteorites, respectively. The u values for terrestrial samples can give information about the cooling history of the samples. For the extraterrestrial samples, it seems that it can give information about the cooling only for spinels where it is lower than 0.2625. For higher values, it appears related only to the chemistry of the spinels.     

Olivine phenocrysts of Hawaiian olivine tholeiite and oceanite

Olivine phenocrysts of Hawaiian tholeiites display a variety of textures and a variation in composition which is due to supercooled crystallization. The highest forsterite content measured is 91%, and the highest magnesia content estimated for a tholeiitic liquid is 17%, using the olivine geothermometer. The liquid of this composition may be either a primary magma or a primitive magma. It is not yet possible to specify any particular composition range for the primary Hawaiian tholeiites.     

Chemical Mechanism Development: Laboratory Studies and Model Applications

Within the German Tropospheric Research Programme (TFS) numerous kinetic and mechanistic studies on the tropospheric reaction/degradation of the following reactants were carried out: oxygenated VOC, aromatic VOC, biogenic VOC, short-lived intermediates, such as alkoxy and alkylperoxy radicals.At the conception of the projects these selected groups were classes of VOC or intermediates for which the atmospheric oxidation mechanisms were either poorly characterised or totally unknown. The motivation for these studies was the attainment of significant improvements in our understanding of the atmospheric chemical oxidation processes of these compounds, particularly with respect to their involvement in photooxidant formation in the troposphere. In the present paper the types of experimental investigations performed and the results obtained within the various projects are briefly summarised. The major achievements are highlighted and discussed in terms of their contribution to improving our understanding of the chemical processes controlling photosmog formation in the troposphere.     

Shock barometry of the Siljan impact structure,Sweden

Abstract– The Siljan impact structure in Sweden is the largest confirmed impact structure in Western Europe. Despite this, the structure has been poorly studied in the past, and detailed studies of shock metamorphic features in the target lithologies are missing. Here, we present the results of a detailed systematic search for shock metamorphic features in quartz grains from 73 sampled localities at Siljan. At 21 localities from an area approximately 20 km in diameter located centrally in the structure, the orientations of 2851 planar deformation feature sets in 1179 quartz grains were measured. Observations of shatter cones outside of the zone with shocked quartz extend the total shocked area to approximately 30 km in diameter. The most strongly shocked samples, recording pressures of up to 20 GPa, occur at the very central part of the structure, and locally in these samples, higher pressures causing melting conditions in the affected rocks were reached. Pressures recorded in the studied samples decrease outwards from the center of the structure, forming roughly circular envelopes around the proposed shock center. Based on the distribution pattern of shocked quartz at Siljan, the original transient cavity can be estimated at approximately 32–38 km in diameter. After correcting for erosion, we conclude that the original rim to rim diameter of the Siljan crater was somewhere in the size range 50–90 km.     

A 3‐D study of mineral inclusions in chromite from ordinary chondrites using synchrotron radiation X‐ray tomographic microscopy—Method and applications

Abstract– A method is described for imaging in 3‐D the interiors of meteoritic chromite grains and their inclusions using synchrotron radiation X‐ray tomographic microscopy. In ordinary chondrites, chromite is the only common mineral that survives long‐term weathering on Earth. Information about the silicate matrix of the original meteorite, however, can be derived from mineral inclusions preserved in the protecting chromite. The inclusions are crucial in the classification of fossil meteorites as well as sediment‐dispersed chromite grains from decomposed meteorites and larger impacts, as these are used for characterizing the past influx of material to Earth, but have previously been difficult to locate. The method is non‐destructive and time efficient for locating inclusions. The method allowed quantitative and morphological studies of both host chromite grains and inclusions in three dimensions. The study of 385 chromite grains from eight chondrites (H4–6, L4–6, LL4, LL6) reveals that inclusions are abundant and equally common in all samples. Almost two‐thirds of all chromite grains contain inclusions, regardless of group and type. The study also shows that the size of the inclusions and the host chromite grains, as well as the number of inclusions, within the host chromite grains vary with petrographic type. Thus, the petrographic type of the host of a suite of chromite grains can be determined based solely on inclusion content. The study also revealed that the amount of fractures in the host chromite can be correlated to previously assigned shock stages for the various chondrites. The study has thus shown that the features and inclusions of fossil chromite grains can give similar information about a former host meteorite as do studies of an unweathered whole meteorite, meaning that this technique is essential in the studies of ancient meteorite flux to Earth.     

Response of xenotime to prograde metamorphism

Xenotime is a widespread accessory mineral in lower greenschist to upper amphibolite facies metasedimentary rocks from the Palaeoproterozoic Mount Barren Group, southwestern Australia. Xenotime is closely associated with detrital zircon, commonly forming syntaxial outgrowths, in samples of sandstone, micaceous quartzite, slate, phyllite, garnet-bearing semi-pelites, and in kyanite-, garnet-, and staurolite-bearing mica schists. In situ geochronology of xenotime from lower greenschist sandstones has previously yielded multiple U–Pb ages with peaks at ~2.0, ~1.7, and ~1.65 Ga, interpreted to represent the age of detritus, early diagenesis, and a later thermal event, respectively. New U–Pb dating of xenotime in slate yields a major population at ~1.7 Ga with a minor population at ~1.2 Ga, reflecting diagenetic and metamorphic growth, respectively, whereas xenotime in phyllite forms a minor age population at ~1.7 Ga and a main peak at ~1.2 Ga. Mid-greenschist facies semi-pelitic schists (quartz-muscovite-garnet) contain xenotime that formed before 1.8 Ga and at 1.2 Ga, representing detrital and peak metamorphic ages, respectively. Xenotime in samples of amphibolite facies schist (650°C and ~8 kbars) yields U–Pb ages of ~1.2 Ga, coinciding with the time of peak metamorphism. A single analysis of a xenotime core from an amphibolite facies schist gave an age of ~1.8 Ga, consistent with the presence of detrital xenotime. Our results suggest that detrital xenotime may be preserved under greenschist facies conditions, but is largely replaced during upper amphibolite facies conditions. Detrital xenotime is replaced through dissolution–reprecipitation reactions forming compositionally distinct rims during greenschist and amphibolite facies metamorphism at 1.2 Ga. Diagenetic xenotime is present in lower greenschist facies samples, but was not observed in metasedimentary rocks that had experienced temperatures above mid-greenschist facies metamorphism (450°C). The apparent disappearance of detrital and diagenetic xenotime and appearance of metamorphic xenotime during prograde metamorphism indicates that some of the yttrium, heavy rare earth elements, and phosphorus needed for metamorphic xenotime growth are probably derived from the replacement of detrital and diagenetic xenotime.