Mantle flow patterns at the Neyriz Paleo-spreading center, Iran

The mantle peridotites of Neyriz record two successive episodes of plastic deformations; the first one related to the igneous accretion of the lithosphere and the second one developed during the first stage of the emplacement of the peridotites. These two events have been distinguished on the basis of microstructural criteria. The diapiric pattern, particularly relevant to the mantle process beneath spreading ridges, features vertical flow lines and elliptic flow plane trajectories in a pipe and extends along the ridge axis about 5 km. These structures rotate to horizontal and diverge in every direction in a narrow transition zone, a few hundred meters thick, below the Moho discontinuity. Such a diapiric pattern has been recognized in a few places along the Neyriz paleo-ridge. A large amount of magma passed through these mantle diapirs that were probably the main zones feeding the overlying magma chamber. The most common pattern features very regular structures over several kilometers along the strike of the paleo-ridge: the flow plane dips away from the ridge axis, and the flow line is parallel to the spreading direction. This flow pattern is frozen during the gradual accretion of the lithospheric mantle away from the ridge in a steady-state spreading regime. A shear-sense inversion at just below the Moho is commonly observed, pointing to forced asthenospheric flow. The reconstructed orientation of the Neyriz paleo-spreading center is 105°, compatible with the geometry and orientation of harzburgite foliations and lineations and sheeted dikes.     

Flood frequency analysis based on simulated peak discharges

Flood frequency approaches vary from statistical methods, directly applied on the observed annual maximum flood series, to adopting rainfall–runoff simulation models that transform design rainfalls to flood discharges. Reliance on statistical flood frequency analysis depends on several factors such as the selected probability distribution function, estimation of the function parameters, possible outliers, and length of the observed flood series. Through adopting the simulation approach in this paper, watershed-average rainfalls of various occurrence probabilities were transformed into the corresponding peak discharges using a calibrated hydrological model. A Monte Carlo scheme was employed to consider the uncertainties involved in rainfall spatial patterns and antecedent soil moisture condition (AMC). For any given rainfall depth, realizations of rainfall spatial distribution and AMC conditions were entered as inputs to the model. Then, floods of different return periods were simulated by transforming rainfall to runoff. The approach was applied to Tangrah watershed in northeastern Iran. It was deduced that the spatial rainfall distribution and the AMCs exerted a varying influence on the peak discharge of different return periods. Comparing the results of the simulation approach with those of the statistical frequency analysis revealed that, for a given return period, flood quantiles based on the observed series were greater than the corresponding simulated discharges. It is also worthy to note that existence of outliers and the selection of the statistical distribution function has a major effect in increasing the differences between the results of the two approaches.     

A study of differentiation pattern and rare earth elements migration in geochemical and hydrogeochemical environments of Airekan and Cheshmeh Shotori areas (Central Iran)

The Airekan and Cheshmeh Shotori areas are located about 60 km northeast of Khour, in Isfahan province from Central Iran. Research on characteristics and rare earth elements (REE) pattern in hydrogeochemical environments of these areas suggests the same origin for the elements dissolved in groundwater in these areas. Investigation of migration pattern of REE in hydrogeochemical environments shows that the migration and transportation of REE has occurred through chloride complexes. REEs, leached by water/rock interaction from the Airekan granite, are transported by groundwater and then precipitated in the Cheshmeh Shotori area. Study of the Cheshmeh Shotori sediments shows the presence of a sequence of red oxidized and dark layers. Geochemical characteristics of these sediments reveal that their REE characteristics are mainly inherited from the Airekan granite. Changes in the REE pattern of these sediments with depth show that changes in oxidation and reduction process have not played a significant role in controlling their behavior. It is crucial to note that adsorption of REEs dissolved in water by hydrosilicate increases these elements in depth. The REE behavior shows water/rock interaction between the granitic rocks and groundwater as the main factor of solution, migration and precipitation of REEs in the Cheshmeh Shotori area.     

Removal of chromium (VI) from aqueous solutions using Lewatit FO36 nano ion exchange resin

The removal of the chromium (VI) ion from aqueous solutions with the Lewatit FO36 ion-exchange resin is described at different conditions. The effects of adsorbent dose, initial metal concentration, contact time and pH on the removal of chromium (VI) were investigated. The batch ion exchange process was relatively fast and it reached equilibrium after about 90 min of contact. The ion exchange process, which is pH dependent showed maximum removal of chromium (VI) in the pH range 5.0–8.0 for an initial chromium (VI) concentration of 0.5 mg/dm³. The equilibrium related to Lewatit FO36 ion- exchange capacity and the amounts of the ion exchange were obtained using the plots of the Langmuir adsorption isotherm. It was observed that the maximum ion exchange capacity of 0.29 mmol of chromium (VLVg for Lewatit FO36 was achieved at optimum pH value of 6.0. The ion exchange of chromium (VI) on this cation-exchange resin followed first-order reversible kinetics.     

Strong ground motion from the November 12, 2017, <Emphasis Type="Bold">M</Emphasis> 7.3 Kermanshah earthquake in western Iran

In this paper, we analyzed the strong ground motion from the November 12, 2017, Kermanshah earthquake in western Iran with moment magnitude (M) of 7.3. Nonlinear and linear amplification of ground motion amplitudes were observed at stations with soft soil condition at hypocentral distances below and above 100 km, respectively. Observation of large ground motion amplitudes dominated with long-period pulses on the strike-normal component of the velocity time series suggests a right-lateral component of movement and propagation of rupture towards southeast. Comparison of the horizontal peak ground acceleration (PGA) from the M 7.3 earthquake with global PGA values showed a similar decay in ground motion amplitudes, although it seems that PGA from the M 7.3 Kermanshah earthquake is higher than global values for NEHRP site class B. We also found that the bracketed duration (D_b) was higher in the velocity domain than in the acceleration domain for the same modified Mercalli intensity (MMI) threshold. For example, D_b reached ~?30 s at the maximum PGA while it was ~?50 s at the maximum peak ground velocity above the threshold of MMI?=?5. Although the standard design spectrum from Iranian Code of Practice for Seismic Resistant Design of Buildings (standard No. 2800) seems to include appropriate values for the design of structures with fundamental period of 1 s and higher, it is underestimated for near-field ground motions at lower periods.     

Experimental estimation of velocities and anisotropy of a series of Swedish crystalline rocks and ores

To provide a guide for future deep (<1.5 km) seismic mineral exploration and to better understand the nature of reflections imaged by surface reflection seismic data in two mining camps and a carbonatite complex of Sweden, more than 50 rock and ore samples were collected and measured for their seismic velocities. The samples are geographically from the northern and central parts of Sweden, ranging from metallic ore deposits, meta‐volcanic and meta‐intrusive rocks to deformed and metamorphosed rocks. First, ultrasonic measurements of P‐ and S‐wave velocities at both atmospheric and elevated pressures, using 0.5 MHz P‐ and S‐wave transducers were conducted. The ultrasonic measurements suggest that most of the measured velocities show positive correlation with the density of the samples with an exception of a massive sulphide ore sample that shows significant low P‐ and S‐wave velocities. The low P‐ and S‐wave velocities are attributed to the mineral texture of the sample and partly lower pyrite content in comparison with a similar type sample obtained from Norway, which shows significantly higher P‐ and S‐wave velocities. Later, an iron ore sample from the central part of Sweden was measured using a low‐frequency (0.1–50 Hz) apparatus to provide comparison with the ultrasonic velocity measurements. The low‐frequency measurements indicate that the iron ore sample has minimal dispersion and attenuation. The iron ore sample shows the highest acoustic impedance among our samples suggesting that these deposits are favourable targets for seismic methods. This is further demonstrated by a real seismic section acquired over an iron ore mine in the central part of Sweden. Finally, a laser‐interferometer device was used to analyse elastic anisotropy of five rock samples taken from a major deformation zone in order to provide insights into the nature of reflections observed from the deformation zone. Up to 10% velocity‐anisotropy is estimated and demonstrated to be present for the samples taken from the deformation zone using the laser‐interferometery measurements. However, the origin of the reflections from the major deformation zone is attributed to a combination of anisotropy and amphibolite lenses within the deformation zone.     

Sedimentary and geochemical evidence of Eocene climate change in the Xining Basin,northeastern Tibetan Plateau

The northeastern Tibetan Plateau began to grow during the Eocene and it is important to understand the climatic history of Asia during this period of so-called ‘doubthouse' conditions. However, despite major advances in the last few decades,the evolutionary history and possible mechanisms of Eocene climate change in the northeastern Tibetan Plateau remain unclear.The Xining Basin in the northeastern Tibetan Plateau contains a continuous sequence of Early to Late Eocene non-marine sediments which provides the opportunity to resolve long-term climate changes during this period. In this study, we report the results of analyses of lithofacies, sediment color and geochemistry of bulk samples collected from the Xijigou section of the Xining Basin. An abrupt lithofacies change between the Early(~52–40 Ma) and Late Eocene(~40–34 Ma) indicates a change in the depositional environment from a shallow lake to a playa lake in response to a significant climatic shift. During ~52–40 Ma,higher values of sediment redness(a*), redness/lightness(a*/L*) and higher modified Chemical Index of Weathering(CIW′)indicate a relatively warm and humid climate, while from ~40–34 Ma the lower values of a*, a*/L*and lower CIW′ imply subhumid to semi-arid climatic conditions. The paleoclimatic records indicate a long-term(~52–34 Ma) trend of decreasing chemical weathering, consistent with global climate change. An abrupt sharp excursion of the proxy records during ~42–40 Ma suggests a relatively brief warm interval, corresponding to the Middle Eocene Climatic Optimum(MECO). We suggest that global cooling substantially reduced humidity in inner Asia, resulting in sub-humid to semi-arid climatic conditions after 40 Ma in the Xining Basin, which may have been responsible for the long-term trend of decreasing chemical weathering during the Eocene.     

An updated Lagrangian finite element formulation for large displacement dynamic analysis of three-dimensional flexible riser structures

An updated Lagrangian finite element formulation of a three-dimensional annular section beam element is presented for large displacement and large rotation dynamic analyses of flexible riser structures. In this formulation a new linearization method is used to avoid inaccuracies normally associated with other linearization schemes. The effects of buoyancy force as well as steady state current loading are considered in the finite element solution for riser structures response. The formulation has been implemented in a nonlinear finite element code and the results are compared with those obtained from other schemes reported in the literature.     

Thermal instability in ionized plasma

We study the magneto-thermal instability in ionized plasmas including the effects of Ohmic, ambipolar and Hall diffusion. The magnetic field in the single-fluid approximation does not allow for transverse thermal condensations; however, non-ideal effects highly diminish the stabilizing role of the magnetic field in thermally unstable plasmas. Therefore, the enhanced growth rate of thermal condensation modes in the presence of the diffusion mechanisms speed up the rate of structure formation.