Main sequence for rotating stars of intermediate mass

We have investigated the evolutionary behaviour of intermediate mass (2, 3, 4, 5, and 7M ) Population I stars, assuming two different rates of rotation at the threshold of stability.In the first part of the study, stars are assumed to start with a critical rotation (fast rotation model) and to progress to the point of rotational instability. The stars evolve by losing mass and become rotationally unstable before they reach the zero-age Main Sequence. It is argued that multiple star systems might be formed through the evolution of rapidly rotating stars. An expression for the rotational mass loss rate is derived as a function of the physical parameters of stars.In the second part of the study, stars are assumed to rotate at a rate below the critical value (slow rotation model). The evolution of slowly rotating stars is followed as far as zero-age Main Sequence on the theoretical Hertzsprung-Russell diagram and compared with that of normal stars. The evolutionary paths are found to be more or less similar to those of normal stars; but their positions on the Main Sequence are characterized by effective temperatures and luminosities lower than those of normal stars. The zero-age Main-Sequence times of these stars are longer than those of normal stars. The rotational rates obtained for the zero-age Main Sequence are in good agreement with observed values.     

Anthropogenic affects on lake sedimentation process: a case study from Lake Sapanca, NW Turkey

Lake Sapanca in NW Turkey is a fault originated freshwater basin fed by seasonally variable flows of 15 streams. Considerations of lake–river interaction, supported by statistical measures of 47 bottom samples, suggest that sediment transport and deposition within the lake is controlled by two types of human constructed structures in addition to natural factors: (1) the dykes constructed in the front of streams, which feed the lake by strong flows, to prevent the filling of lakebed by coarse-grained sediments; (2) the constructed regulator on the outflowing Çarksuyu stream results in a higher sedimentation rate of clay-sized material on the NE corner of the lake, which is extraordinary in the shelf environment.     

On the longitudinal distribution of the solar surges

After re-examination of data presented by Verma (1984), some misuse of solar parameteres published in Solar Geophysical Data is presented. Consequently some conclusions made by Verma (1984, 1986) on about the longitudinal distribution of cool solar surges based on these misuses are discussed.     

Precambrian fluvial deposits: Enigmatic palaeohydrological data from the c. 2–1.9 Ga Waterberg Group, South Africa

Precambrian fluvial systems, lacking the influence of rooted vegetation, probably were characterised by flashy surface runoff, low bank stability, broad channels with abundant bedload, and faster rates of channel migration; consequently, a braided fluvial style is generally accepted. Pre-vegetational braided river systems, active under highly variable palaeoclimatic conditions, may have been more widespread than are modern, ephemeral dry-land braided systems. Aeolian deflation of fine fluvial detritus does not appear to have been prevalent. With the onset of large cratons by the Neoarchaean–Palaeoproterozoic, very large, perennial braided river systems became typical. The c. 2.06–1.88 Ga Waterberg Group, preserved within a Main and a smaller Middelburg basin on the Kaapvaal craton, was deposited largely by alluvial/braided-fluvial and subordinate palaeo-desert environments, within fault-bounded, possibly pull-apart type depositories.

Palaeohydrological data obtained from earlier work in the Middelburg basin (Wilgerivier Formation) are compared to such data derived from the correlated Blouberg Formation, situated along the NE margin of the Main basin. Within the preserved Blouberg depository, palaeohydrological parameters estimated from clast size and cross-bed set thickness data, exhibit rational changes in their values, either in a down-palaeocurrent direction, or from inferred basin margin to palaeo-basin centre. In both the Wilgerivier and Blouberg Formations, calculated palaeoslope values (derived from two separate formulae) plot within the gap separating typical alluvial fan gradients from those which characterise rivers (cf. [Blair, T.C., McPherson, J.G., 1994. Alluvial fans and their natural distinction from rivers based on morphology, hydraulic processes, sedimentary processes, and facies assemblages. J. Sediment. Res. A64, 450–489.]). Although it may be argued that such data support possibly unique fluvial styles within the Precambrian, perhaps related to a combination of major global-scale tectono-thermal and atmospheric–palaeoclimatic events, a simpler explanation of these apparently enigmatic palaeoslope values may be pertinent. Of the two possible palaeohydrological formulae for calculating palaeoslope, one provides results close to typical fluvial gradients; the other formula relies on preserved channel-width data. We suggest that the latter will not be reliable due to problematic preservation of original channel-widths within an active braided fluvial system. We thus find no unequivocal support for a unique fluvial style for the Precambrian, beyond that generally accepted for that period and discussed briefly in the first paragraph.     

Back-analysis of a seismically induced highway embankment failure during the 1999 Düzce earthquake

An earthquake of magnitude 7.2 on the Richter scale occurred on 12 November 1999 in the Düzce-Bolu region of Turkey. The region was also hit approximately 3 months before during the devastating Kocaeli earthquake of 17 August 1999. Besides high casualties and damage to various engineering structures and buildings, slope and embankment failures on the highway and the country roads occurred. In this study, the authors are concerned with the back-analysis of an embankment failure that occurred on the four lanes E-5 highway connecting Ankara to Gstanbul at Bakacak in the Bolu Province during the 1999 Düzce earthquake. Both pseudo-dynamic and dynamic limiting equilibrium methods are used to back analyse the conditions for the initiation of failure and also displacement responses of the embankment during the earthquake shaking. After having given a brief summary of the investigations on the post-failure state, the geology and geotechnical characteristics of the site, and the dynamic limiting equilibrium method developed and used for analyses are described. The results of the back-analysis based on a pseudo-dynamic approach, revealed that the maximum ground acceleration to initiate the failure of the embankment was probably about 0.125 g. On the other hand, the application of a method for computing the displacement and velocity responses of the failed embankment showed that the failure was possible when the embankment was subjected to ground accelerations similar to that recorded at the Düzce station. In addition, the computations also revealed that the time history of accelerations could be very important for the failure of slopes and embankments.     

Geotechnical and geoenvironmental characteristics of man-made underground structures in Cappadocia, Turkey

Underground cities and semi-underground settlements, most of which are 1500 years at least, exist in the Cappadocia Region of Turkey. These man-made rock structures are carved in soft tuffs and the best examples of long-term performance of man-made structures in the field of rock engineering. The tuffs also have good thermal isolation properties to be used as housing and storage of foods. In this article, the authors are only concerned with physical and short-term mechanical characteristics due to the wide-spectrum of the theme and the in situ characterization of the Cappadocia tuffs, and the results of investigations are presented. In addition, a critical overview on possible engineering geological problems at Cappadocia with mechanical aspects of historical and modern rock structures and their implications in rock engineering is made. From the experimental results in the field, it is evident that the engineering characteristics of these rocks do not show significant changes in vertical and horizontal directions. However, they are prone to atmospheric conditions. In addition, temperature and humidity measurements at different floors of the underground cities and various parts of semi-underground settlements indicated that variations in climatic conditions of the openings are very small when compared to those outside the ground surface.     

Tectonic evolution of the Intra-Pontide suture zone in the Armutlu Peninsula, NW Turkey

The Armutlu Peninsula and adjacent areas in NW Turkey play a critical role in tectonic reconstructions of the southern margin of Eurasia in NW Turkey. This region includes an inferred Intra-Pontide oceanic basin that rifted from Eurasia in Early Mesozoic time and closed by Late Cretaceous time. The Armutlu Peninsula is divisible into two metamorphic units. The first, the Armutlu Metamorphics, comprises a ?Precambrian high-grade metamorphic basement, unconformably overlain by a ?Palaeozoic low-grade, mixed siliciclastic/carbonate/volcanogenic succession, including bimodal volcanics of inferred extensional origin, with a possibly inherited subduction signature. The second unit, the low-grade znik Metamorphics, is interpreted as a Triassic rift infilled with terrigenous, calcareous and volcanogenic lithologies, including basalts of within-plate type. The Triassic rift was unconformably overlain by a subsiding Jurassic–Late Cretaceous (Cenomanian) passive margin including siliciclastic/carbonate turbidites, radiolarian cherts and manganese deposits. The margin later collapsed to form a flexural foredeep associated with the emplacement of ophiolitic rocks in Turonian time. Geochemical evidence from meta-basalt blocks within ophiolite-derived melange suggests a supra-subduction zone origin for the ophiolite. The above major tectonic units of the Armutlu Peninsula were sealed by a Maastrichtian unconformity. Comparative evidence comes from the separate Almacık Flake further east.Considering alternatives, it is concluded that a Mesozoic Intra-Pontide oceanic basin separated Eurasia from a Sakarya microcontinent, with a wider Northern Neotethys to the south. Lateral displacement of exotic terranes along the south-Eurasian continental margin probably also played a role, e.g. during Late Cretaceous suturing, in addition to overthrusting.     

U/Pb and Pb/Pb zircon ages for arc-related intrusions of the Bolu Massif (W Pontides, NW Turkey): evidence for Late Precambrian (Cadomian) age

We present new U/Pb and Pb/Pb radiometric age data from two tectono-stratigraphic units of the regionally extensive Bolu Massif, in the W Pontides (İstanbul Fragment), N Turkey. A structurally lower unit (Sünnice Group) is cut by small meta-granitic intrusions, whereas the structurally higher unit comprises meta-volcanic rocks (Çaşurtepe Fm) cut by meta-granitic plutons (Tüllükiriş and Kapıkaya plutons). U/Pb single-crystal dating of zircons from the Kapıkaya Pluton yielded a concordant cluster, with a mean ²³⁸U/²⁰⁶Pb age of 565.3 ± 1.9 Ma. Zircons from the Tüllükiriş Pluton (affected by Pb loss) gave a ²⁰⁷Pb/²⁰⁶Pb age of 576 ± 6 Ma age (Late Precambrian). Small meta-granitic intrusions cutting the Sünnice Group yielded a less precise ²⁰⁷Pb/²⁰⁶Pb age of 262 ± 19 Ma (Early Permian). The older ages from the Bolu Massif confirm the existence of latest Precambrian arc magmatism related to subduction of a Cadomian ocean. We infer that the Bolu Massif represents a fragment of a Cadomian active margin. Cadomian orogenic units were dispersed as exotic terranes throughout the Variscan and Tethyan orogens, and the Bolu Massif probably reached its present position prior to latest Palaeozoic time. Our dating results also confirm that NW Turkey was affected by Hercynian magmatism related to subduction of Palaeotethys, as inferred for other areas of the Pontides.     

Age and tectonomagmatic setting of the Eocene Çöpler–Kabataş magmatic complex and porphyry-epithermal Au deposit, East Central Anatolia, Turkey

The Çöpler epithermal Au deposit and related subeconomic porphyry Cu–Au deposit is hosted by the middle Eocene Çöpler–Kabata? magmatic complex in central eastern Anatolia. The intrusive rocks of the complex were emplaced into Late Paleozoic–Mesozoic metamorphosed sedimentary basement rocks near the northeastern margin of the Tauride-Anatolide Block. Igneous biotite from two samples of the magmatic complex yielded ⁴⁰Ar/³⁹Ar plateau ages of 43.75?±?0.26 Ma and 44.19?±?0.23, whereas igneous hornblende from a third sample yielded a plateau age of 44.13?±?0.38. These ages closely overlap with ⁴⁰Ar/³⁹Ar ages of hydrothermal sericite (44.44?±?0.28 Ma) and biotite (43.84?±?0.26 Ma), and Re–Os ages from two molybdenite samples (44.6?±?0.2 and 43.9?±?0.2 Ma) suggesting a short-lived (<1 my) magmatic and hydrothermal history at Çöpler. No suitable minerals were found that could be used to date the epithermal system, but it is inferred to be close in age to the precursor porphyry system. The Çöpler–Kabata? intrusive rocks show I-type calc-alkaline affinities. Their normalized trace element patterns show enrichments in large ion lithophile and light rare earth elements and relative depletions in middle and heavy rare earth elements, resembling magmas generated in convergent margins. However, given its distance from the coeval Eocene Maden–Helete volcanic arc, the complex is interpreted to be formed in a back-arc setting, in response to Paleocene slab roll-back and upper-plate extension. The tectonomagmatic environment of porphyry-epithermal mineralization at Çöpler is comparable to some other isolated back-arc porphyry systems such as Bajo de la Alumbrera (Argentina) or Bingham Canyon (USA).