Petrography and geochemistry of the Upper Cretaceous Nubia sandstones,Eastern Desert,Egypt: implications for provenance,paleoweathering, and tectonic setting

The provenance of the Upper Cretaceous Nubia sandstones from four vertical sections along Qena-Safaga and Qena-Quseir roads in central Eastern Desert of Egypt was investigated based on their modal composition and geochemical data. The Nubia sandstone samples are abundant in quartz content with low feldspar and lithic fragments. Their average modal composition (Q_94.2F_1.3R_4.5) classifies them as quartz arenites with subordinate quartz wackes which is consistent with geochemistry data. The average CIA, CIW, PIA, and Th/U ratio values revealed that the intensity of weathering in the studied areas was similar, varying from moderate to intensive weathering, and may reflect low-relief and warm humid climatic conditions in the source area. The ICV (<?1) and SiO₂/Al₂O₃ ratio (>?5) indicate that the Nubia sandstones are texturally and mineralogically mature. The petrographical and geochemical analyses suggest that the Nubia sandstones were mainly derived from felsic (granitic) and/or recycled sand sources. The major element-based multidimensional tectonic discrimination diagrams suggested the Nubia sandstones were deposited in a passive continental margin of a syn-rift basin. This result agreed with the general geology of central Eastern Desert of Egypt during the Upper Cretaceous.     

Assessment of the reliability of supervised classifications of Landsat-7, ASTER,and SPOT-5 multispectral data in rock unit discriminations of Jabal Daf-Wadi Fatima area,Saudi Arabia

Multispectral, multiresolution remotely sensed data were processed to emphasize geological interpretation of Jabal Daf-Wadi Fatima area. The investigated area is situated in the central western part of Saudi Arabia and geologically consists of igneous and metamorphosed rocks overlain by sedimentary sequence belonging to the Arabian-Nubian Shield. Three sets of digital satellite data, Landsat-7 ETM+, ASTER, and SPOT-5, were used in this study. The application of image processing techniques enables to identify and delineate the lithologic units and the structural features of the study area. The results of this study indicate that the confusion matrix of the three maximum likelihood supervised classifications of the three datasets shows that the Landsat ETM+ bands scored the best degree of average and overall accuracy (77 and 78%, respectively). This classification distinguishes most of the rock units for mapping in the investigated area. The supervised classification of ASTER and SPOT bands has lower degrees of accuracy than the classified Landsat data. The supervised classification of SPOT bands has a degree of average and overall accuracy of 66 and 67%, respectively, but it is the best for distinguishing the spectral signatures of the different members of Fatima Formation (lower, middle, and upper members). The statistical analyses of the confusion matrices of classifications and the interpretation of the produced classified thematic maps revealed that the classification accuracy does not necessary depend on the spatial resolution of satellite data. The data of the highest spatial resolution such as SPOT data are also very useful in emphasizing and classifying the rock units of a small outcrop area. The detailed geological map of Jabal Daf-Wadi Fatima area is interpreted in this work from supervised classified images of different resolutions as well as the structure map of this area. This study shows that it is preferable to use the supervised classifications of multiresolution data for rock unit discrimination in detailed field mapping.     

Utilization of supervised classification in structural and lithological mapping of Wadi Al-Marwah Area,NW Arabian Shield,Saudi Arabia

Wadi Al-Marwah area is located in the northwestern part of the Arabian Shield, Saudi Arabia. It is mainly covered by Precambrian igneous and sedimentary rock units. This area was not subjected to previous detailed lithological or structural mapping. This study aims to apply supervised classification technique of remotely sensed digital satellite data of Landsat 7 for detailed lithological and structural mapping of the area. The fusion between multispectral Enhanced Thematic Mapper (ETM)+ data and high-resolution panchromatic ETM+ band-8 produced a color composite fused image for the study area, scale 1:50,000. The structural lineaments of the study area were extracted and interpreted from the digital imageries data. Little discrepancies or improvements were detected when combining the supervised classification results with the Landsat ratios or principal component analysis. These highlighted the benefits of multispectral classification, especially in terms of lithologic discrimination. The overall results of image processing techniques, applied in this work, were excellent and succeeded in the performance of a more detailed and accurate lithological and structural maps (scale 1:50,000) than the previous published maps for the investigated area.     

Evaluation of Static Liquefaction Characteristics of Saturated Loose Sand Through the Mean Grain Size and Extreme Grain Sizes

Liquefaction of soils is a natural phenomenon associated with a dramatic loss of the soil shear strength in undrained conditions due to a development of excess pore water pressure. It usually causes extensive damages to buildings and infrastructures during earthquakes. Thus, it is important to evaluate extent of influential parameters on the liquefaction phenomenon of soils in order to clearly understand the different mechanisms leading to its triggering. The soil gradation is one of the most important parameters affecting the liquefaction phenomenon. In this context, a series of undrained compression triaxial tests were carried out on eighteen natural loose (Dr = 25%) sandy samples containing low plastic fines content of 2% (I_p = 5%) considering different extreme sizes (1.6 mm ≤ D_max ≤ 4 mm and 0.001 mm ≤ D_min ≤ 0.63 mm) and two mean grain size ranges (0.25 mm ≤ D₅₀ ≤ 1.0 mm) and (1.0 mm ≤ D₅₀ ≤ 2.5 mm). The initial confining pressure for all tests was kept constant (P′_c = 100 kPa). The obtained test results indicate that the mean grain size (D₅₀) and extreme grain sizes (D_max and D_min) have a significant influence on the undrained shear strength (known as liquefaction resistance) and appear as pertinent factors for the prediction of the undrained shear strength for the soil gradation under study. The undrained shear strength and the excess pore water pressure can be correlated to the extreme grain sizes (D_max and D_min) and the mean grain size (D₅₀) of tested wet deposited samples.     

A general approach to the modelling of contaminant transport through composite landfill liners with intact or leaking geomembranes

Finite‐element models of contaminant transport through composite landfill liners require highly refined meshes around the interface between the geomembrane and the clay layer, especially if leakage through holes in the geomembrane is considered. In addition, no general formulation for transport through leaking geomembranes can be found in the literature. The paper develops a general approach to time‐dependent contaminant migration through composite liners with intact or leaking geomembranes. Equations are derived for various combinations of system conditions including Dirichlet and Neumann boundary conditions in the waste, constant mass of contaminants in the waste, steady state or transient transport in the geomembrane, and steady state or transient seepage velocities in the mineral liner. The effect of the geomembrane on transport in the soil is converted into an equivalent boundary condition applicable at the top of the clay layer. Hence, only the media underlying the top geomembrane are explicitly represented in the numerical model, yielding a computationally efficient algorithm. The new formulation is validated in conjunction with finite‐layer, finite‐element and boundary‐element methods, by comparing its predictions to those of more conventional approaches which represent the geomembrane explicitly. The scope of the method is illustrated by modelling a landfill liner with a geomembrane leaking in five locations. Copyright © 2007 John Wiley & Sons, Ltd.     

Utilities of Landsat 7 data and selective image processing in characterization of radioactivity zones of Wadi Baba–Wadi Shalal Area, Westcentral Sinai, Egypt

Wadi Baba–Wadi Shalal area locates in the westcentral part of Sinai, Egypt. It is covered by a Precambrian basement rocks comprise the northern part of the Precambrian Arabo-Nubian crystalline massive. The lithologic and structural setting of the investigated area was interpreted from the digital Landsat-7 Enhanced Thematic Mapper Plus (ETM+) data. The structural lineament analyses for the lithologic units and their relationships to the high-radioactivity zones (HRZ) and the characterizations of HRZ of the study area are the main tasks of this article. Extraction algorithm was applied using Geomatica PCI package under the user defined parameters. The extracted structural lineaments have been evaluated and chicked using the visual interpretation and published works. The short-wave infrared spectral ETM+ band-7 was selected as an optimum data for automatic lineaments extraction since it scored the highest lineament frequency (1856) compared to the other visible and near infrared bands. The aeroradiometric color raster total count equivalent thorium (eTh) and equivalent uranium (eU) maps were used to delineate the highest radioactivity zones of the study area. A selective image processing technique (SIPT) is a new approach in Geomatica (9.1), which gives rise to valuable results in this work. The SIPT was carried out for the subset of the ETM+ data of the highest radioactivity zones. The spatial distribution of the structural lineament pattern maps for some low-radioactivity zones (LRZ) and for the highest radioactivity zones of the study area are prepared with their frequency rose diagrams. The NE–SW trend is the predominant structural lineaments trend in the investigated area. The NE–SW to the ENE–WSW directions are the predominant structural lineament trends in both the LRZ and the HRZ. These high-radioactivity zones of the investigated area are characterized by high lineaments density and lineaments-intersection density, restricted to Um Bogma Formation and younger granitic rocks and are not controlled by structural lineament trends.     

Identification of the behavior of sandy soil to static liquefaction and microtomography

In this paper, undrained triaxial compression tests were performed on specimens obtained in Oued Rass sand (Chlef, Algeria). The objective of this study is to investigate the effects of specimen deposition methods, the initial density, and the confining pressure on the undrained behavior of this sand. The test results show that the initial confining pressure and the relative density affected, in a significant manner, the resistance to liquefaction. However, it increases with confining pressure and relative density. The results also show that the specimens prepared by dry deposition method have a greater resistance to liquefaction than those prepared by moist tamping. A nondestructive comparative analysis of the deposits by X-ray microtomography carried out at the granular scale made it possible to characterize more precisely the difference of the obtained structures for the two deposition modes.     

Three‐dimensional finite elements for the analysis of soil contamination using a multiple‐porosity approach

A three‐dimensional finite‐element model of contaminant migration in fissured clays or contaminated sand which includes multiple sources of non‐equilibrium processes is proposed. The conceptual framework can accommodate a regular network of fissures in 1D, 2D or 3D and immobile solutions in the macro‐pores of aggregated topsoils, as well as non‐equilibrium sorption. A Galerkin weighted‐residual statement for the three‐dimensional form of the equations in the Laplace domain is formulated. Equations are discretized using linear and quadratic prism elements. The system of algebraic equations is solved in the Laplace domain and solution is inverted to the time domain numerically. The model is validated and its scope is illustrated through the analysis of three problems: a waste repository deeply buried in fissured clay, a storage tank leaking into sand and a sanitary landfill leaching into fissured clay over a sand aquifer. Copyright © 2005 John Wiley & Sons, Ltd.