In situ strength measurements on natural upper-mantle minerals

Using in situ strength measurements at pressures up to 10 GPa and at room temperature, 400, 600, and 700°C, we examined rheological properties of olivine, orthopyroxene, and chromian-spinel contained in a mantle-derived xenolith. Mineral strengths were estimated using widths of X-ray diffraction peaks as a function of pressure, temperature, and time. Differential stresses of all minerals increase with increasing pressure, but they decrease with increasing temperature because of elastic strain on compression and stress relaxation during heating. During compression at room temperature, all minerals deform plastically at differential stress of 4–6 GPa. During subsequent heating, thermally induced yielding is observed in olivine at 600°C. Neither orthopyroxene nor spinel shows complete stress relaxation, but both retain some stress even at 700°C. The strength of the minerals decreases in the order of chromian-spinel ≈ orthopyroxene > olivine for these conditions. This order of strength is consistent with the residual pressure of fluid inclusions in mantle xenoliths.     

Issues of Globalization and Reflexivity in the Japanese Tourism Production System: The Case of Whistler,British Columbia

This article examines contemporary Japanese overseas tourism from a supplier‐side perspective using the concept of production systems. We first outline characteristics of the evolving structure of Japanese overseas tourism, with an emphasis on the global spread of Japanese travel companies. This provides a frame for presenting an empirical account of the transactional relationships in the Japanese package tour production system in Whistler, British Columbia, where Japanese tour operators play a pivotal role. We conclude that the recent expansion of Japanese travel companies is fostering the functional integration of the global tourism production system and exhibits increasing reflexivity.     

High-reliability zircon separation for hunting the oldest material on Earth: An automatic zircon separator with image-processing/microtweezers-manipulating system and double-step dating

Despite the recent development in radiometric dating of numerous zircons by LA-ICPMS, mineral separation still remains a major obstacle, particularly in the search for the oldest material on Earth. To improve the efficiency in zircon separation by an order of magnitude, we have designed/developed a new machine-an automatic zircon separator(AZS). This is designed particularly for automatic pick-up of100 μm-sized zircon grains out of a heavy mineral fraction after conventional separation procedures. The AZS operates in three modes:(1) image processing to choose targeted individual zircon grains out of all heavy minerals spread on a tray,(2) automatic capturing of the individual zircon grains with microtweezers, and(3) placing them one-by-one in a coordinated alignment on a receiving tray. The automatic capturing was designed/created for continuous mineral selecting without human presence for many hours. This software also enables the registration of each separated zircon grain for dating, by recording digital photo-image, optical(color) indices, and coordinates on a receiving tray. We developed two new approaches for the dating; i.e.(1) direct dating of zircons selected by LA-ICPMS without conventional resin-mounting/polishing,(2) high speed U-Pb dating, combined with conventional sample preparation procedures using the new equipment with multiple-ion counting detectors(LA-MIC-ICPMS).With the first approach, Pb-Pb ages obtained from the surface of a mineral were crosschecked with the interior of the same grain after resin-mounting/polishing. With the second approach, the amount of time required for dating one zircon grain is ca. 20 s, and a sample throughput of 150 grains per hour can be achieved with sufficient precision(ca. 0.5%).We tested the practical efficiency of the AZS, by analyzing an Archean Jack Hills conglomerate in Western Australia with the known oldest(4.3 Ga) zircon on Earth. Preliminary results are positive; we were able to obtain more than 194 zircons that are over 4.0 Ga out of ca. 3800 checked grains, and 9 grains were over 4300 Ma with the oldest at 4371 ± 7 Ma. This separation system by AZS, combined with the new approaches, guarantees much higher yield in the hunt for old zircons.     

Prediction method of sand-movement direction in water by geochemical elements

The analysis of sand samples by x-ray fluorescent spectroscopy (XRF) gives the ratio of the geochemical elements to construct the sand samples. The x-ray analysis therefore shows the geochemical characteristics of sand in the sampled area. In this study, sand is sampled on coasts and rivers of the Noto Peninsula to determine the geochemical elements and to show the geological characteristics that occur, especially iron and calcium. The experiments show the effect of rivers and Kotogahama beach on iron and calcium, respectively. Applying the method of ratio matching to the measured data of the geochemical elements, the direction of movement of sand on the coast is determined by considering the correlation matrix and the ratio of geochemical elements between sand samples at two locations. The predominant longshore direction movement of sand offshore in the study area is from south to north. Sand in rivers is not directly transported to adjacent beaches; however, offshore sand is transported to beaches. The estimated direction of movement of sand longshore near coastal structures agrees with observations. The proposed method to predict the direction of movement of sand gives the correct one in comparison with the observed data in rivers.     

Nutricline shoaling in the eastern Pacific warm pool during the last two glacial maxima

Isoprenoid glycerol dialkyl glycerol tetraethers (GDGTs) and alkenones were analyzed in sediment samples retrieved from Ocean Drilling Program Site 1241 covering the last 150000 years to understand the hydrological evolution of the eastern Pacific warm pool (EPWP). GDGT and alkenone concentrations showed higher values in marine isotope stage (MIS)-2 and MIS-6, which suggests the enhancement of primary production at glacial maxima. $ {\text{TEX}}_{86}^{\text{H}} $ - and $ U_{ 3 7^\prime }^{\text{K}} $ -derived temperature depicted different temperature evolutions. $ U_{ 3 7^\prime }^{\text{K}} $ -derived temperature was marked by small variation during the glacial–interglacial cycles, whereas $ {\text{TEX}}_{86}^{\text{H}} $ -derived temperature showed pronounced glacial–interglacial variation that was similar to Mg/Ca-derived temperature records from nearby cores in the EPWP. Given that enhanced primary production during glacial maxima suggests nutricline shoaling, unchanged $ U_{ 3 7^\prime }^{\text{K}} $ over glacial–interglacial cycles can be interpreted as the shift of alkenone production depth. $ {\text{TEX}}_{86}^{\text{H}} $ seems not to be influenced by glacial–interglacial changes in nutricline depths, recording an integrated temperature in surface and thermocline water. The shallow nutricline in the EPWP during glacial maxima most likely reflected the intense formation of Antarctic intermediate water.     

Concentration and behavior of detrital mineral grains suspended in the water column of the open sea in the western Pacific

The pattern of distribution of detrital mineral grains in the water column was investigated at three stations in the western Pacific during July through August of 1979. The sedimentation of detrital mineral grains was also studied using piston cores from two sites adjacent to the three stations. The concentration of suspended detrital mineral grains in the subsurface waters becomes lower with increasing distance from the land, and shows a prominent peak in the intermediate zone of the water column. The sharp increase in water density and viscosity in the pycnocline in the intermediate zone decreases the settling velocity of grains, and may result in the accumulation of falling grains in the intermediate layer. Proportion of detrital mineral grains to organic remains in the sediment was more than two orders of magnitude larger than in the overlying water column, and reasons for this are briefly discussed.     

Finite‐element analysis of laminated rubber bearing of building frame under seismic excitation

Finite element analysis is carried out for a building frame supported by laminated rubber bearings to simultaneously investigate global displacement and local stress responses under seismic excitation. The frame members and the rubber bearings are discretized into hexahedral solid elements with more than 3 million degrees of freedom. The material property of rubber is represented by the Ogden model, and the frame is assumed to remain in elastic range. It is shown that the time histories of non‐uniform stress distribution and rocking behavior of the rubber bearings under a frame subjected to seismic excitation can be successfully evaluated, and detailed responses of base and frame can be evaluated through large‐scale finite element analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Roles of Continental Shelves and Marginal Seas in the Biogeochemical Cycles of the North Pacific Ocean

Most marginal seas in the North Pacific are fed by nutrients supported mainly by upwelling and many are undersaturated with respect to atmospheric CO₂ in the surface water mainly as a result of the biological pump and winter cooling. These seas absorb CO₂ at an average rate of 1.1 ± 0.3 mol C m⁻²yr⁻¹ but release N₂/N₂O at an average rate of 0.07 ± 0.03 mol N m⁻²yr⁻¹. Most of primary production, however, is regenerated on the shelves, and only less than 15% is transported to the open oceans as dissolved and particulate organic carbon (POC) with a small amount of POC deposited in the sediments. It is estimated that seawater in the marginal seas in the North Pacific alone may have taken up 1.6 ± 0.3 Gt (10¹⁵ g) of excess carbon, including 0.21 ± 0.05 Gt for the Bering Sea, 0.18 ± 0.08 Gt for the Okhotsk Sea; 0.31 ± 0.05 Gt for the Japan/East Sea; 0.07 ± 0.02 Gt for the East China and Yellow Seas; 0.80 ± 0.15 Gt for the South China Sea; and 0.015 ± 0.005 Gt for the Gulf of California. More importantly, high latitude marginal seas such as the Bering and Okhotsk Seas may act as conveyer belts in exporting 0.1 ± 0.08 Gt C anthropogenic, excess CO₂ into the North Pacific Intermediate Water per year. The upward migration of calcite and aragonite saturation horizons due to the penetration of excess CO₂ may also make the shelf deposits on the Bering and Okhotsk Seas more susceptible to dissolution, which would then neutralize excess CO₂ in the near future. Further, because most nutrients come from upwelling, increased water consumption on land and damming of major rivers may reduce freshwater output and the buoyancy effect on the shelves. As a result, upwelling, nutrient input and biological productivity may all be reduced in the future. As a final note, the Japan/East Sea has started to show responses to global warming. Warmer surface layer has reduced upwelling of nutrient-rich subsurface water, resulting in a decline of spring phytoplankton biomass. Less bottom water formation because of less winter cooling may lead to the disappearance of the bottom water as early as 2040. Or else, an anoxic condition may form as early as 2200 AD. This revised version was published online in July 2006 with corrections to the Cover Date.     

Measurement of Impact Ejecta from Regolith Targets in Oblique Impacts

This paper reports the results of experiments on projectile impact into regolith targets at various impact angles. Copper projectiles of 240 mg are accelerated to 197 to 272 m s⁻¹ using an electromagnetic gun. The ejecta are detected by thin Al foil targets as secondary targets, and the resulting holes on the foil are measured to derive the spatial distribution of the ejecta. The ejecta that penetrated the foil are concentrated toward the downrange azimuths of impacting projectiles in oblique impacts. In order to investigate the ejecta velocity distribution, the nondimensional volume of ejecta with velocities higher than a given value is calculated from the spatial distribution. In the case of the vertical impact of the projectile, most ejecta have velocities lower than 24% of the projectile speed (∼50 m s⁻¹), and there are only several ejecta with velocities higher than 72 m s⁻¹. This result confirms the existence of an upper limit to the ejection velocity in the ejecta velocity distribution (Hartmann cutoff velocity) (W. K. Hartmann, 1985, Icarus63, 69-98). On the other hand, it is found that, in the oblique impacts, there are a large number of ejecta with velocities higher than the Hartmann cutoff velocity. The relative quantity of ejecta above the Hartmann cutoff velocity increases as the projectile impact angle decreases. Taking these results with the results of S. Yamamoto and A. M. Nakamura (1997, Icarus128, 160-170) from impact experiments using an impact angle of 30°, it can be concluded that the ejecta from these regolith targets exhibit a bimodal velocity distribution. Below a few tens of m s⁻¹, we see the expected velocity distribution of ejecta, but above this velocity we see a separate group of high-velocity ejecta.