The Upper Permian Sedimentary Facies and Its Role in the Dajing Cu-Sn Deposit, Linxi County, Inner Mongolia, China

Abstract: Exhaustive investigations were launched for confirming the upper Permian host rocks of the Dajing Cu-Sn Deposit, probing into the possibility that Dajing is a Sedex type deposit during cosedimentation, complementing the deficiency of previous researches and going further into substantiating the role of the upper Permian strata in the control of ore distribution. After more than two years work, we reclassified the sedimentary facies in the Dajing area and its periphery as shallow fresh water lake and delta. Indicative sedimentary structures, such as ripple marks, rain marks, and mud cracks combined with contemporary fossils, were revealed. Having measured the flow directions, performed chemical comparison, and analyzed various sediments from sourceland in the Dajing area by XRF, we consequently redivided the strata into four sedimentary members, among which P₂l₁ and P₂l₂ were concluded as significant ore-hosted strata. The upper Permian basin was a lateral rift basin. The water and sediments in the basin are much deeper and thicker in the north than those in the south.
The indicators of special sedimentary facies, such as gravity flow, brine pool and synchronogenic stratiform structure of the ore cannot be found in the Dajing area. There was no growth fault, assemblage of sulfide and sulfate, and no zonation as well.
On the basis of study in this area, taking into account the paleosedimentary environment as capriciously flowing shallow lake, which approximated the state of oxidation, we figured that the paleogeography made it prohibitively difficult to form stratiform sulfide deposits which are prone to form in deoxidized environment. It can be ruled out the possibility that the Dajing deposit is a syngenetic deposit during sedimentation.     

Improving strategies with constraints regarding non-Gaussian statistics in a three-dimensional variational assimilation method

We assess validity of a Gaussian error assumption, the basic assumption in data assimilation theory, and propose two kinds of constraints regarding non-Gaussian statistics. In the mixed water region (MWR) off the east coast of Japan exhibiting complicated frontal structures, a probability density function (PDF) of subsurface temperature shows double peaks corresponding to the Kuroshio and Oyashio waters. The complicated frontal structures characterized by the temperature PDF sometimes cause large innovations, bringing about a non-Gaussianity of errors. It is also revealed that assimilated results with a standard three-dimensional variational (3DVAR) scheme have some issues in MWR, arising from the non-Gaussianity of errors. The Oyashio water sometimes becomes unrealistically cold. The double peaks seen in the observed temperature PDF are too smoothed. To improve the assimilated field in MWR, we introduce two kinds of constraints, J _c1 and J _c2, which model the observed temperature PDF. The constraint J _c1 prevents the unrealistically cold Oyashio water, and J _c2 intends to reproduce the double peaks. The assimilated fields are significantly improved by using these constraints. The constraint J _c1 effectively reduces the unrealistically cold Oyashio water. The double peaks in the observed temperature PDF are successfully reproduced by J _c2. In addition, not only subsurface temperature but also whole level temperature and salinity (T–S) fields are improved by adopting J _c1 and J _c2 to a multivariate 3DVAR scheme with vertical coupled T–S empirical orthogonal function modes.     

Three‐dimensional shapes and Fe contents of Stardust impact tracks: A track formation model and estimation of comet Wild 2 coma dust particle densities

Abstract– We investigated three‐dimensional structures of comet Wild 2 coma particle impact tracks using synchrotron radiation (SR) X‐ray microtomography at SPring‐8 to elucidate the nature of comet Wild 2 coma dust particles captured in aerogel by understanding the capture process. All tracks have a similar entrance morphology, indicating a common track formation process near the entrance by impact shock propagation irrespective of impactor materials. Distributions of elements along the tracks were simultaneously measured using SR‐XRF. Iron is distributed throughout the tracks, but it tends to concentrate in the terminal grains and at the bottoms of bulbs. Based on these results, we propose an impact track formation process. We estimate the densities of cometary dust particles based on the hypothesis that the kinetic energy of impacting dust particles is proportional to the track volume. The density of 148 cometary dust particles we investigated ranges from 0.80 to 5.96 g cm^?3 with an average of 1.01 (±0.25) g cm^?3. Moreover, we suggest that less fragile crystalline particles account for approximately 5 vol% (20 wt%) of impacting particles. This value of crystalline particles corresponds to that of chondrules and CAIs, which were transported from the inner region of the solar system to the outer comet‐forming region. Our results also suggest the presence of volatile components, such as organic material and perhaps ice, in some bulbous tracks (type‐C).     

Rockfall hazard in the Daisekkei Valley, the northern Japanese Alps, on 11 August 2005

This paper describes a rockfall event in the Daisekkei Valley of Mount Shirouma-dake (2,932 m), the northern Japanese Alps. The rockfall occurred on a steep cliff comprising well-jointed felsites and produced debris of ≥8,000 m³. Most debris was deposited on an elongated snowpatch located immediately beneath the cliff, and it caused casualties among people who were trekking along a trail on the snowpatch. Additionally, a large rock block slipped 1 km on the snowpatch. The rockfall could have been due to the differential retreat of the rockwall, which contains areas of high- and low-density joints. Seasonal and diurnal freeze–thaw activities and snow avalanches and wash appear to be important factors responsible for the retreat. Although some rock blocks that can collapse further remain on the rockwall, the position of the mountain trail in the Daisekkei Valley is fixed. Fundamental reform of tourism systems for climbers, including education on natural hazards, is required.     

A hypothesis of the Senoumi submarine megaslide in Suruga Bay in Japan—based on the undrained dynamic-loading ring shear tests and computer simulation

The distinctive bathymetric feature exists in the Suruga Bay, Japan. It has been called as Senoumi (Stone flower sea) from old times. Senoumi is a 30?km wide and 20?km long concave feature. Its origin has not been explained yet; however, the feature might be a combined consequence of intensive tectonic activity in the plate border, landslides, and a submarine flow coming from the Oi River. If the Senoumi was caused by a landslide, the latter would be larger than any on-land landslide in Japan. The downshelf “exit” from this feature is much narrower than its central part. This is not usual shape of landslides, but it is similar to the liquefied landslides such as those in quick clays which mobilize great strength reduction after failure. To study Senoumi as a landslide, the shear behaviors of the following three soil samples were investigated by the cyclic and seismic undrained stress control ring shear tests. One sample is volcanic ash taken from the base of landslide deposits (mass transport deposits), from 130 to 190?m deep layer below the submarine floor which was drilled and cored by the Integrated Ocean Drilling Program Expedition 333. Another two samples are the Neogene silty–sand and silt taken from the Omaezaki hill adjacent to the Senoumi, because the shear zone might have been formed in Neogene layers extending from on-land to the continental shelf. The largest strength reduction from peak to steady-state shear resistance in the undrained cyclic loading test was found in volcanic ash. The strength reduction in Neogene silty–sand was smaller than volcanic ash, while the Neogene silt mobilized the least post-failure strength reduction. An integrated model simulating the initiation and motion of earthquake-induced rapid landslides (landslide simulation (LS)-RAPID, Sassa et al. Landslides 7–3:219–236, 2010) was applied to this study. The steady-state shear resistance and other geotechnical parameters measured by the undrained ring shear tests and the greatest strong motion record in the 2011 off-the-Pacific Coast of Tohoku earthquake (M _w 9.0), also known as “2011 Tohoku Earthquake” at the observation point MYG004 (2,933?gal) were input to this model. As the result, it was found that landslides would be triggered by 0.30–1.0 times of MYG004 in volcanic ash, 0.4–1.0 times of MYG004 in Neogene silty–sand and Neogene silt, though the depth and area of triggered landslides were different in soils and intensity of shaking. Feature, created by LS-RAPID using the parameters of volcanic ash, was most similar to the Senoumi in depth and extent. The result obtained from this study includes a hypothesis to be proved, but presents the strong need to investigate the risk of the large-scale submarine landslides which could enhance tsunami wave and possibly enlarge the submarine landslide retrogressively into the adjacent coastal plain by the upcoming mega earthquake in the Nankai Trough.     

Liquid bridge contribution to shear behavior of unsaturated soil: modeling and application to a micromechanics model

Acta Geotechnica - Liquid bridges in unsaturated soils attach to grain contacts and contribute to strengthening microscopic bonding forces, which leads to macroscopic high strength and stiffness...     

Bayesian and Neural Network Approaches to Estimate Deep Temperature Distribution for Assessing a Supercritical Geothermal System: Evaluation Using a Numerical Model

The temperature distribution at depth is a key variable when assessing the potential of a supercritical geothermal resource as well as a conventional geothermal resource. Data-driven estimation by a machine-learning approach is a promising way to estimate temperature distributions at depth in geothermal fields. In this study, we developed two methodologies—one based on Bayesian estimation and the other on neural networks—to estimate temperature distributions in geothermal fields. These methodologies can be used to supplement existing temperature logs, by estimating temperature distributions in unexplored regions of the subsurface, based on electrical resistivity data, observed geological/mineralogical boundaries, and microseismic observations. We evaluated the accuracy and characteristics of these methodologies using a numerical model of the Kakkonda geothermal field, Japan, where a temperature above 500 °C was observed below a depth of about 3.7 km. When using geological and geophysical knowledge as prior information for the machine learning methods, the results demonstrate that the approaches can provide subsurface temperature estimates that are consistent with the temperature distribution given by the numerical model. Using a numerical model as a benchmark helps to understand the characteristics of the machine learning approaches and may help to identify ways of improving these methods.

     

Instability processes of mesoscale features in the Kuroshio Extension reproduced through assimilation of altimeter data into a quasi-geostrophic model using the variational method

The Kuroshio, one of the most energetic western boundary currents in the world, shows variations in its mesoscale features and recirculation gyres, providing an excellent test case of interactions between the mesoscale field and Kuroshio Extension (KE) states. A three-layer quasi-geostrophic model was used to reconstruct flow fields continuous in time and the horizontal plane from the TOPEX/POSEIDON altimeter data based on the variational method. Compared with the solutions obtained by the nudging method, the present results proved that the variational solution was closer to the real field. In the assimilation period, 1993–1997, the baroclinic instability index (BII) was defined to be the phase shift from the uppermost layer to the lowest layer with mesoscale features. In the first half of the assimilation period, the KE took the transition from the elongated to contracted states, in which BII decreased gradually, as a consequence of the KE state shift. In the second half period, BII increased in the downstream region just west of the Shatsky Rise, in which baroclinic instability contributed to the final stage of the contracted state, and was followed by rapidly weakened instability as a trigger of the opposite transition from the contracted to elongated states. The wind-driven recirculation gyre played an active role on the KE transition in the first half period, although not in the second half.     

Creating a diversified community: Community safety activity in Musashino City,Japan

The recent development of the third sector and the government encouragement of it have attracted the attention of many researchers. In particular, geographical research has examined how the third sector has been affected or changed by government policies or guidelines in recent political economic contexts, especially neo-liberalism and also neo-communitarianism. While much research has demonstrated that the relationship between the government and the third sector is becoming closer, and has considered the problematic impact on the sector or the community, recent studies have described a much more complicated relationship and its consequence. In response, this paper attempts to explore alternative effects of government encouragement at the local community level, through utilising empirical data on recent voluntary activity regarding community safety by the Voluntary Organisations for Crime Prevention Patrol (VOCPP) in Musashino City, a suburb of Tokyo in Japan. Before focusing on the case study in Musashino, the paper briefly outlines key geographical literature on the third sector, and also examines recent expectations of Japan’s third sector using Japanese political documents. Finally, the paper argues that the encouragement of government in fact has the potential to work as a ‘catalyst’ leading to a more independent third sector, with a geographically and organisationally less hierarchical structure, and may also assist in developing a more diversified community.