Impact of Changes in Redox Conditions on Leaching of Some Elements from MSW Fly Ash

Abstract. Oxidation and reduction processes can influence extent of leaching of elements from solid waste. Three samples of municipal solid waste combustion fly ash were subjected to oxidizing and reducing conditions in order to evaluate leaching of elements in the Milli-Q water and fly ash (liquid to solid ratio, 100) mixtures. Although the oxidizing and reducing conditions were applied for 6 hours only, elements like Cs, Li, Mg, Sb, Tl and V leached more under oxidizing condition than under reducing condition in the case of all three ash samples. Cadmium, Pb and Zn leached more from all samples under reducing condition than under oxidizing condition. Leaching of other elements like Al, Ba, Cr, Cu, Ni and Rb was inconsistent with oxidizing or reducing conditions and varied from sample to sample, suggesting that factors other than redox may be more important in controlling leaching of these elements. Strong acid neutralization capacity of the fly ash samples let the pH vary within a narrow range, and thus severely limited the extent of leaching during the course of the experiment. Lead and Zn were the most sensitive while K and Na were the least sensitive to changes in redox conditions.     

Modelling size effect on rock aggregates strength using a DEM bonded-cell model

Empirical evidence has shown that particle breakage affects the mechanical behaviour of granular materials. The source of this mechanism takes place at the particle scale, and the main consequence on the macromechanical behaviour is increasing compressibility. Due to the inverse correlation between particle size and particle crushing strength, coarse rockfill materials are particularly vulnerable to mechanical degradation due to particle breakage. However, such coarse materials do not fit in standard laboratory devices, and the alternative of large sample testing is usually unavailable or too expensive. Alternatively, recent works have proposed multi-scale approaches using the discrete element method (DEM) to carry out numerical testing of coarse crushable materials, although few studies have focused on size effects. This article presents the application of a DEM bonded-cell model to study particle size-strength correlation on angular rock aggregates. Each particle is modelled by a cluster of perfectly rigid polyhedral cells with Mohr–Coulomb contact law. Constant cell density within particles implies that the presence of potential fragmentation planes increases with size. Therefore, particle strength decreases with size. A comprehensive sensitivity analysis was carried out through 1477 particle crushing simulations in a given particle size. Based on published experimental data on calcareous rock aggregates, part of the simulations were used for calibration, and 97 additional simulations of a coarser size fraction were performed for validation. The results show a good agreement with the empirical data in terms of size effect and data scatter through Weibull statistics.

     

Ozone variation in the lower stratosphere and its mechanism

Seasonal variations of ozone are studied by taking into consideration both photochemical and dynamical processes. Assuming that the seasonal variations of total ozone amounts are linear combinations of photochemical equilibrium variations and those due to atmospheric motions, the observed variations of the total ozone amount seem reasonably to be explained.The concept mentioned above implies that the time scale of ozone might be rather short in the lower stratosphere. The order of the half restoration time was estimated to be 10 to 10² days in the lower stratosphere. Thus the estimated time scale of ozone must be somewhat longer than that of the temperature in the lower stratosphere, of which variation usually shows its maximum in the midwinter in middle latitudes, while that of ozone shows its maximum in the late winter or early spring. As the maximum values of both quantities would appear in the early summer without air motions, the similarity in the phase differences of temperature and ozone suggests the validity of the concept of this paper.     

Experimental study of the alteration process of labradorite in acid hydrothermal solutions

Labradorite was altered artificially by HC1 solution ranging from M = 1 to M = 0.003 at 245 and 230°C. The products of alteration were examined by X-ray diffraction, electron microscopy, electron diffraction, infrared spectroscopy and the electron microprobe and the solution was analyzed chemically.Amorphous silica only was formed in solutions with M_HCl = 1 and M_HCl = 0.3. In a solution with M_HCl = 0.2, amorphous silica was initially formed, later dissolved and replaced by kaolinite. A mixture of microcrystalline boehmite and amorphous aluminosilicate was formed, altering to kaolinite in solutions with M_HCl = 0.1 and 0.3. Small amounts of kaolinite were initially formed but the alteration soon stopped in solution with M_HCl = 0.003. Relationships between the alteration processes and pH of the solutions can be roughly explained by using solubility diagrams assuming the congruent dissolution of labradorite and precipitation of the products in partial equilibrium. However, these assumptions are not valid with strongly acid solutions.The rate of dissolution of labradorite is controlled not only by its surface area, but also by the diffusion of matter through the layer of alteration products.     

Otolith Microstructure Analysis Reveals Different Growth Histories of Japanese Sardine (Sardinops melanostictus) in the Oyashio Waters

After decades of low year classes,the stock of Japanese sardine(Sardinops melanostictus)has begun to recover since the mid-2000s.The hatch dates and otolith growth rates of age-0 juvenile sardine,which were collected in the subarctic Oyashio waters in autumn 2018,were determined from an otolith microstructure analysis.The sardines were hatched from late January to late April,while mostly in February and March.The otolith growth rate increased continuously up to 60 d after hatching and thereafter de-creased.The revealed growth rate in a crucial growth period is faster than that reported for juvenile sardines collected in the 1990s,which is coincided with the recent recovery trend of the sardine stock.Two groups with different hatch dates,growth histories,and migration routes were identified using unsupervised random forest clustering analysis.They were considered inshore and offshore migration individuals in accordance with recent researches.In the offshore group,a high proportion of sardine juveniles hatched late and grew faster in the Kuroshio-Oyashio transitional waters,a finding consistent with the hypothesis of growth-rate-dependent re-cruitment.This finding on the population composition and growth rate of juvenile sardine in the Oyashio waters can be a basis for an improved prediction of their survival and provides us with valuable information on the recruitment processes of this stock during the period of stock recovery.     

Lunar gravity field determination using SELENE same-beam differential VLBI tracking data

A lunar gravity field model up to degree and order 100 in spherical harmonics, named SGM100i, has been determined from SELENE and historical tracking data, with an emphasis on using same-beam S-band differential VLBI data obtained in the SELENE mission between January 2008 and February 2009. Orbit consistency throughout the entire mission period of SELENE as determined from orbit overlaps for the two sub-satellites of SELENE involved in the VLBI tracking improved consistently from several hundreds of metres to several tens of metres by including differential VLBI data. Through orbits that are better determined, the gravity field model is also improved by including these data. Orbit determination performance for the new model shows improvements over earlier 100th degree and order models, especially for edge-on orbits over the deep far side. Lunar Prospector orbit determination shows an improvement of orbit consistency from 1-day predictions for 2-day arcs of 6 m in a total sense, with most improvement in the along and cross-track directions. Data fit for the types and satellites involved is also improved. Formal errors for the lower degrees are smaller, and the new model also shows increased correlations with topography over the far side. The estimated value for the lunar GM for this model equals 4902.80080±0.0009 km³/s² (10 sigma). The lunar degree 2 potential Love number k ₂ was also estimated, and has a value of 0.0255 ± 0.0016 (10 sigma as well).     

Apatite Composition of Representative Magnetite‐series and Ilmenite‐series Granitoids in Japan

Apatites of representative magnetite‐series and ilmenite‐series granitoids were studied in the Japanese Islands. Concentrations of the volatile components F, Cl and SO₃ are differently distributed in apatites of these granitoid series. Apatites are always fluoroapatite. They have weakly higher F content in the ilmenite series than in the magnetite series. In contrast, Cl and SO₃, are significantly concentrated in apatites of the magnetite series compared to the ilmenite series. These characteristics reflect the original concentrations of these components in the host granitic magmas. A high fO₂ seems most important for the S‐concentration as sulfate in apatite of the magnetite series. REE and Y are only erratically high in the studied apatites.     

Temperature and pH Dependence of Some Metals Leaching from Fly Ash of Municipal Solid Waste

Abstract. Municipal solid waste combustion leads to concentration of various metals in the solid residue (fly ash) remaining after combustion. These metals pose serious environmental hazard and require proper handling and monitoring in order to control their harmful effects. Leachability of some metals from fly ash was examined in fly ash and Milli-Q water mixture (liquid-to-solid ratio, 100) under various temperature and pH conditions in the laboratory. The leaching experiments conducted for 24 hours showed that pH was generally more important than temperature in controlling the amount of metals leached out of the fly ash. However, at a given pH, rise in temperature led to different degree of (usually one to two fold) enhanced or reduced leaching of metals. Owing to amphoteric nature of oxides of Al, Cr, Pb and Zn, these metals often yielded typical pattern of increase and decrease in their concentrations with change in pH. The extent of leaching of Cr and Pb in our experiments suggests that decrease of pH to acidic range in the case of Pb and to neutral to acidic range for Cr over a long period of storage of fly ash at solid waste dumping site may facilitate leaching of these metals from fly ash, leading to contamination of groundwater to the level that exceeds beyond the level permitted by the environmental laws.     

Genesis of the Jinchuan PGE deposit, China: evidence from fluid inclusions, mineralogy and geochemistry of precious elements

Summary The Jinchuan deposit is a platinum group element (PGE)-rich sulfide deposit in China. Drilling and surface sampling show that three categories of platinum group element (PGE) mineralization occur; type I formed at magmatic temperatures, type II occurs in hydrothermally altered zones of the intrusion, and type III in sheared dunite and lherzolite. All ore types were analyzed for Os, Ir, Ru, Rh, Pd, Pt and Au, as well as for Cu, Ni, Co and S. Type I ore has (Pt + Pd)/(Os + Ir + Ru + Rh) ratios of <7 and relatively flat chondrite-normalized noble metal patterns; the platinum group minerals (PGM) are dominated by sperrylite and moncheite associated with chalcopyrite, pyrrhotite and pentlandite. Type II has (Pt + Pd)/(Os + Ir + Ru + Rh) ratios from 40 to 330 and noble metal distribution patterns with a positive slope; the most common PGM are sperrylite and Pd bismuthotelluride phases concentrated mostly at the margins of base metal sulfides. Type III ores have the highest (Pt + Pd)/(Os + Ir + Ru + Rh) ratios from 240 to 710; the most abundant PGM are sperrylite and phases of the Pt–Pd–Te–Bi–As–Cl system. It is concluded that the Jinchuan deposit formed as a result of primary magmatic crystallization followed by hydrothermal remobilization, transport, and deposition of the PGE.