Wave enhancement due to blockage in semi-submersible and TLP structures

An exact analytical method is described to solve the diffraction problem of a group of truncated vertical cylinders. In order to account for the interaction between the cylinders, Kagemoto and Yue's exact algebraic method is utilised (Kagemoto, H., Yue, D.K.P., 1986. Interactions among multiple three-dimensional bodies in water waves: an exact algebraic method. J Fluid Mech, 46, 129–139). The isolated cylinder diffraction potential is obtained using Garret's solution and evanescent mode solutions are derived in a similar manner (Garret, C.J.R., 1971. Wave forces on a circular dock. J Fluid Mech, 46, 129–139).Free surface elevations are calculated for an array of four cylinders and compared with experiments. Comparisons show good agreement.     

Determination of Cyanuric Acid in Swimming Pool Water and Milk by Differential Pulse Polarography

Cyanuric acid is a suspected gastrointestinal or liver toxicant in humans. Therefore, determination of trace cyanuric acid is very important, in this work a novel, sensitive, and reliable method was developed using differential pulse polarography. Optimum conditions for analytical determination were found to be at a pH of 9.5, Britton–Robinson at a reduction potential of ?105 mV. Experimental results indicate an excellent linear correlation between the peak current and the concentration in the range of cyanuric acid from 0.5 to 27.0 µM (0.06–3.5 µg mL^?1) with a correlation coefficient of 0.997. The limit of detection and limit of quantification were obtained as 0.15 and 0.5 µM (0.02–0.06 µg mL^?1), respectively. The proposed method was successfully applied to the determination of cyanuric acid in pool water and in spiked milk. Cyanuric acid level in swimming pool water was found as 2.54 ± 0.47 µg mL^?1 (19.7 ± 2.29 µM) in swimming pool water for N = 4 and 95% confidence interval. The recoveries were found to be sufficient. Also, the standard deviation of the data was low which shows high accuracy and precision of proposed differential pulse polarographic method. The influences of some other commonly found inorganic salts on the determination of cyanuric acid were also examined. Some interfering species were eliminated using complexing agents, e.g., EDTA.     

A parametric study on seakeeping assessment of fast ships in conceptual design stage

The paper presents an approach to investigate the effects of some parameters on seakeeping assessment of fast ships in conceptual design stage. Hull form parameters have been classified into two groups: main dimensions (L, B and T) and secondary form parameters (LCB and C_P). To demonstrate the approach a fast ship is redesigned as parent hull and alternative hull forms are generated by changing these parameters systematically. Some hull forms are selected related the geometric limits and seakeeping analyzes are here investigated and discussed. The obtained results are satisfactory for seakeeping predictions during the conceptual design stage.     

Space-Time Geometry of Quark and Strange Quark Matter

We study quarkand strangequarkmatter in the contextof generalrelativity.For this purpose,we solve Einstein's field equations for quark and strange quark matter in spherical symmetric space-times. We analyze strange quark matter for the different equations of state (EOS) in the spherical symmetric space-times,thus we are able to obtain the space-time geometries of quark and strange quark matter. Also,we discuss the features of the obtained solutions. The obtained solutions are consistent with the results of Brookhaven Laboratory,i.e. the quark-gluon plasma has a vanishing shear (i.e. quark-gluon plasma is perfect).     

‘Filament’ marker beds in the Karababa-A Member (Turonian) of the Arabian platform,SE Turkey: Palaeo-environmental significance,stratigraphy and correlation potential

A ‘filament’ event bed/level corresponds to the occurrence of thin elongate calcitic, shells, or plates of pelagic, bivalve or crinoidal, origin, within pelagic, laminated and organic-matter rich limestones. These organic-rich limestones had been generally deposited under hypoxic/anoxic conditions in an outer-ramp environment. These thin elongate, bivalve shells, or crinoidal plates, are found broken in small pieces, disintegrated, or simply preserved parallel to bedding as almost complete specimens. Such ‘filament’ beds were spotted in SE Turkey in deposits, namely the Karababa-A Member, around the Cenomanian-Turonian boundary (C/TB) and above. On a global scale, these filament event beds illustrate sea-level rise related to eustacy and/or climatic change. The abundance of filaments close to the C/TB is a biological marker of high organic productivity resulting from a climatic change to warmer conditions. The prevailing higher sea-level conditions were then favourable to the accumulation and preservation of organic-rich facies, characteristic of the Oceanic Anoxic Event 2 (OAE2). Using both biostratigraphic and carbon isotopic data, those deposits were dated from the latest Cenomanian-Turonian age. ‘Filament’ event beds were recorded in the same order, except for some small differences. A good number of these bio-events are global. Consequently, on a global scale, they are susceptible to constrain the C/TB, especially the base of the Turonian stage, with a significant degree of confidence.     

A study on the limit void ratio characteristics of medium to fine mixed graded sands

The minimum and maximum void ratios, corresponding to states of densest and loosest packing, of 111 systematically prepared mixed graded sand samples are determined with Method 2A and Method B according to ASTM D 4253 and ASTM D 4254 standards, respectively. Although, those standards are applicable to soils that may contain up to at most 15% fines content, for the harmony of the results even for samples having fines content greater 15%, no other methods are used throughout the experimental program. The test results show that 3rd degree polynomial equations derived from existing experimental data, as a function of packing material percentage, are quite reasonable (R² ≈ 1.0) to estimate the variation of minimum and maximum void ratios for the sands considered. Furthermore, error analysis of the limit void ratios is also carried out. It is found that predictability of maximum void ratio for the soil types and gradations considered is more accurate than that of minimum void ratio.     

Investigation of Various Parameters Effect on Cerchar Abrasivity Index with PFC3D Modeling

The Cerchar test is one of the appropriate and routine tests for determining the rock abrasion; but as for the costs and pin wear measurement errors in laboratory procedures and lack of access to laboratory equipment, using of numerical modeling can lead to use of greater number of samples required during the course of mechanized excavation and reduce the costs and errors in the laboratory test. In this study, the Cerchar abrasivity test was modeled using PFC3D (Particle Flow Code in 3 Dimensions) software. In order to verify the simulation results, Cerchar laboratory test results obtained by Rostami (Rock Mech Rock Eng 47(5):1905–1919, 2014) were compared with the numerical modeling results. In modeling studies, the effects of some parameters such as apply load, test speed, pin hardness and scratching distance on pin wear were investigated. As a conclusion of the study, good agreement between modeling and experimental results was obtained for a given condition. As in the experiment with various loads in both laboratory tests and modeling, with increasing applied load the Cerchar abrasivity index also increased in the experiment with Rockwell hardness HRC (An abbreviation for Rockwell Hardness measured on the C scale. The Rockwell test determines the hardness by measuring the depth of penetration of an indenter under a large load compared to the penetration made by a preload, that on the C scale use from a indenter with 120° cone and 150 kgf load) 42.     

Zoobenthos of Lake Uluabat,a Ramsar Site in Turkey,and Their Relationship with Environmental Variables

The numerical and proportional distributions of zoobenthos in lake Uluabat, which is located in the Northwestern part of Turkey and having international importance according to the Ramsar Convention, were determined from August 2004 to July 2005 at monthly intervals (except for December 2004, January and February 2005) at 12 different stations. Thirty‐three taxonomic groups were recorded. It was found that the zoobenthos consisted of 35.6 % Oligochaeta, 27.7 % Nematoda, 12.3 % Chironomidae larvae, 10.7 % Gastropoda, 3.6 % Ostracoda, and 10.1 % Varia by numbers (Bivalvia, Ceratopogonidae, Hirudinea, Odonata, Ephemeroptera, Asilidae, Hydraacarina, Hemiptera, Argulidae, and Gammaridae). The average number of invertebrates was 160 individuals for 33 taxa at the 12 different stations. Also some environmental parameters of the lakewater were analyzed (temperature, pH, dissolved oxygen, biochemical oxygen demand, chemical oxygen demand, NO₂–N, NO₃–N, NH₃–N, PO₄^–3, fecal coliform, and total coliform). The relationships between the dynamics of the Oligochaeta and the physicochemical variables were supported by the Pearson correlation index and the canonical correspondence analysis (CANOCO). It was found that the relation between the average number of P. hammoniensis and P. albicola (p < 0.05, r = 0.590 and 0.593, respectively) and L. hoffmeisteri (p < 0.01, r = 0.777) was directly proportional while the relation between the average number of some taxa Trichodrillus sp., Rhyacodrilus coccineus, Nais communis, N. variabilis, and N. barbata and NO₃–N (p < 0.05, r = –0.685) was inversely proportional.