基于GF-1卫星的海上溢油定量监测——以青岛溢油事故为例

基于GF-1卫星数据对2013年11月22日青岛黄潍输油管道爆炸造成的海面溢油进行定量监测。研究首先采用2013年11月26日GF-1卫星数据对海面溢油进行提取,其统计面积为0.67 km2;其次,结合肖剑伟提出的油膜厚度单波段反演模型估算油膜厚度,最终计算得到溢油量为0.28 t;最后,对Band 1反射率与油膜厚度结果进行灰度分割,将溢油污染程度分为6级,对比发现两者分级结果较为一致。由此得出,通过反射率直接进行灰度分割可以对溢油污染进行有效的等级评定。     

上海数字强震观测网

上海市数字强震观测网是我国第1个具有一定规模的数字强震观测网，是上海市“九五”期间建设完成的，它由3部分组成；地面观测网，结构观测网和深井强震观测系统，每一部分都有不同的功能和目的，本文详细介绍该强震网的整个概况。功能及取得的部分观测成果。     

丰城洛市地区推,滑覆构造特征及其成因探讨

介绍了洛市地区推、滑覆构造特征、运动学标志及其形成时期、成因模式。     

Polar WRF模式海冰密集度方案对北极海雾模拟效果的个例研究

全球变暖的背景下,北极航线的常规通航甚至商业运营有望实现,而海雾会严重影响航道上船只的航行安全。海冰的存在使海气之间相互作用变得更为复杂,是研究北极海雾不可忽略的因素。船载观测发现,与中纬度常见平流冷却雾形成时气温下降速度往往超过海水降温速度不同,北极海雾发生时海冰的存在还会使海水降温速度超过空气降温速度。然而目前海冰分布是否会影响模式模拟海雾的准确性还不得而知,因此本文利用Polar WRF（Polar Weather Research and Forecasting）模式模拟了中国第七次北极考察中观测到的一次海雾过程,并进行海冰密集度敏感性试验。通过与船载观测和欧洲中期天气预报中心再分析数据比对发现,在低浮冰区内（海冰密集度小于50%）考虑海冰分布时可以更加准确地刻画潜热通量与水汽通量,模拟出与观测事实相符的表层空气降温与增湿过程以及相对湿度的变化,因此能够更好地刻画海雾的三维结构及其生消演变。     

水下仿生扑翼机器人的发展现状综述

参照蝠鲼等鱼类游动方式所研制的水下仿生扑翼机器人具有效率高、机动性强、负载能力大等多方面优势。由于其广阔的应用前景,水下仿生扑翼机器人已逐步成为水下航行器领域的研究热点。本文系统地将蝠鲼的生物学特性、机器人的结构设计、动力学模型、单体运动控制、集群运动控制以及实验研究等方面的国内外研究进展进行了总结和梳理。已有的研究表明：水下仿生扑翼机器人正在朝着软体化、集群化、 高机动等方向发展,新兴的水下仿生扑翼机器人及仿生集群能够更加精确的模拟真实生物的游动姿态,并开展相关任务。当下的研究为水下仿生扑翼机器人性能的进一步优化与提升奠定了坚实的理论与实践基础。     

吉林省西林河金矿构造特征及找矿方向

对矿区划分了太古宙、元古宙、中生代和新生代四个构造层；整个矿区为一棋盘格子形构造体系；主干构造形迹为由东、中、西三个韧性挤压剪切带，金矿的主要成矿构造是西部韧性挤压、剪切带，主要找矿方向为西带Ｆ６及其派生的近南北向剪切断裂群。     

利用毫米波测云雷达反演层状云中过冷水

毫米波测云雷达已成为研究云内微物理参数的有效工具,利用其从混合相云中识别出过冷水,对人工影响天气及预防飞机积冰具有重要意义,对我国毫米波雷达的数据处理也具有借鉴作用。本文利用英国的35 GHz、94 GHz测云雷达,结合激光雷达和探空资料,采用阈值法,反演分析了层状云中的过冷水。结果表明:(1)毫米波雷达联合激光雷达可以识别层状云中的过冷水,其结果与微波辐射计测量的液态水路径或毫米波雷达的双峰谱相符合;(2)利用多普勒速度的双峰谱可以反演混合相云中的过冷水含量、冰晶含水量。混合相云的雷达反射率因子主要取决于冰晶,根据雷达反射率因子反演会低估云内液态水含量;(3)本次层状云降水的亮带以上含有较多过冷水,此处35 GHz的雷达回波强度随冰晶的增大而减弱,且冰晶的含水量主导了总液态水含量。     

Exploring the effects of data quality,data worth,and redundancy of CO2 gas pressure and saturation data on reservoir characterization through PEST inversion

This study examined the impacts of reservoir properties on carbon dioxide (CO₂) migration after subsurface injection and evaluated the possibility of characterizing reservoir properties using CO₂ monitoring data such as spatial–temporal distributions of gas pressure, which can be reasonably monitored in practice. The injection reservoir was assumed to be located 1,400–1,500 m below the ground surface such that CO₂ remained in the supercritical state. The reservoir was assumed to contain layers with alternating conductive and resistive properties, which is analogous to actual geological formations such as the Mount Simon Sandstone unit. The CO₂ injection simulation used a cylindrical grid setting in which the injection well was situated at the center of the domain, which extended out 8,000 m from the injection well. The CO₂ migration was simulated using the latest version of the simulator, subsurface transport over multiple phases (the water–salt–CO₂–energy module), developed by Pacific Northwest National Laboratory. A nonlinear parameter estimation and optimization modeling software package, Parameter ESTimation (PEST), is adopted for automated reservoir parameter estimation. The effects of data quality, data worth, and data redundancy were explored regarding the detectability of reservoir parameters using gas pressure monitoring data, by comparing PEST inversion results using data with different levels of noises, various numbers of monitoring wells and locations, and different data collection spacing and temporal sampling intervals. This study yielded insight into the use of CO₂ monitoring data for reservoir characterization and how to design the monitoring system to optimize data worth and reduce data redundancy. The feasibility of using CO₂ saturation data for improving reservoir characterization was also discussed.     

Vanadium and niobium behavior in rutile as a function of oxygen fugacity: evidence from natural samples

Vanadium occurs in multiple valence states in nature, whereas Nb is exclusively pentavalent. Both are compatible in rutile, but the relationship of V–Nb partitioning and dependence on oxygen fugacity (expressed as fO₂) has not yet been systematically investigated. We acquired trace-element concentrations on rutile grains (n = 86) in nine eclogitic samples from the Dabie-Sulu orogenic belt by laser ablation inductively coupled plasma mass spectrometry (LA–ICP–MS) and combined them with published results in order to assess the direct and indirect effects of oxygen fugacity on the partitioning of V and Nb into rutile. A well-defined negative correlation between Nb (7–1,200 ppm) and V concentrations (50–3,200 ppm) was found, documenting a competitive relationship in the rutile crystal that does not appear to be controlled by bulk rock or mineral compositions. Based on the published relationship of ^RtD_V and V valence with ?QFM, we suggest that the priority order of V incorporation into rutile is V⁴⁺ > V³⁺ > V⁵⁺. The inferred Nb–V competitive relationship in rutile from the Dabie-Sulu orogenic belt could be explained by decreasing fO₂ due to dehydration reactions involving loss of oxidizing fluids during continental subduction: The increased proportion of V³⁺ (expressed as V³⁺/∑V) and attendant decrease in ^RtD_V is suggested to lead to an increase in rutile lattice sites available for Nb⁵⁺. A similar effect may be observed under more oxidizing conditions. When V⁵⁺/∑V increases, ^RtD_V shows a dramatic decline and Nb concentration increases considerably. This is possibly documented by rutile in highly metasomatized and oxidized MARID-type (MARID: mica–amphibole–rutile–ilmenite–diopside) mantle xenoliths from the Kaapvaal craton, which also show a negative V–Nb covariation. In addition, their Nb/Ta covaries with V concentrations: For V concentrations <1,250 ppm, Nb/Ta ranges between 35 and 45, whereas for V > 1,250 ppm, Nb/Ta is considerably lower (5–15). This relationship is mainly controlled by a change in Nb concentrations, suggesting that the indirect dependence of ^RtD_Nb on fO₂, which is not mirrored in ^RtD_Ta, can exert considerable influence on rutile Nb–Ta fractionation.