Channel geometry of mountain streams in New Zealand

A dataset of 21 study reaches in the Porter and Kowai rivers (eastern side of the South Island), and 13 study reaches in Camp Creek and adjacent catchments (western side of the South Island) was used to examine downstream hydraulic geometry of mountain streams in New Zealand. Streams in the eastern and western regions both exhibit well-developed downstream hydraulic geometry, as indicated by strong correlations between channel top width, bankfull depth, mean velocity, and bankfull discharge. Exponents for the hydraulic geometry relations are similar to average values for rivers worldwide. Factors such as colluvial sediment input to the channels, colluvial processes along the channels, tectonic uplift, and discontinuous bedrock exposure along the channels might be expected to complicate adjustment of channel geometry to downstream increases in discharge. The presence of well-developed downstream hydraulic geometry relations despite these complicating factors is interpreted to indicate that the ratio of hydraulic driving forces to substrate resisting forces is sufficiently large to permit channel adjustment to relatively frequent discharges.     

Relationships between land-use and forced-pool characteristics in the Colorado Front Range

Land use practices in Colorado during the last two centuries altered the supply of sediment and water to many channels in the upper South Platte Basin. As a result of increased supply of sediment and mobility and reduced peak flows, the characteristics of pools associated with channel constrictions, referred to as forced pools, may have been altered. Increased supply of sediment and reduced transport capacity of high flows could lead to aggradation in forced pools. Channel confined by road corridors could lead to high velocities at normal flows, increased energy dissipation from riprap, or even increased pool frequency resulting from failed riprap. To assess potential alterations, four hypotheses were tested: (1) impacted streams will show significantly different mean volume of pools than a control stream; (2) mean volume of pools on streams where land-use activities increased the supply of sediment will be significantly different from streams solely affected by flow regulation; (3) the strongest change in characteristics of pools of impacted streams will be a reduced volume of pools; (4) streams affected by road corridors will show statistically lower spacing of pools than streams unaffected by roads. The downstream spacing and residual volume of twenty consecutive forced pools were surveyed on five streams in the Colorado Front Range that varied from no contemporary impact to multiple historical and contemporary impacts. ANCOVA with stepwise model selection indicated that degree of land-use (categorical), bankfull spacing of pools, upstream riffle slope and expansion ratio were all significant (α = 0.1) predictors of volume of pools (R² = 0.73). Simple linear regression of mean volume of pools and stream specific variables (gradient, drainage area and discharge) and least square means comparison of mean volume of pools indicated a need to standardize volumes of pools by slope and discharge so that the volumes of pools could be compared among different levels of land-use. Significant correlations between drainage area and volume of pools allowed volume of pools to be standardized by drainage area and thereby discharge. This dimensionless variable was also significantly correlated with channel slope, which permitted the construction of a new variable, PV_QS (volume of pools standardized by discharge and slope). Least square means comparison of mean PV_QS revealed that the control reach was significantly different from road-impacted reaches. Mean volume of pools was significantly larger in the control reach compared to all but one road-impacted stream. This was likely a function of higher wood loading in the control reach and the competence of high flows in the road-impacted reach. Streams affected by road corridors did not have significantly different bankfull spacing of pools from streams not impacted by roads. The multiple interactions among control and response variables explored in this study indicate the need to identify the most constrained and sensitive response variables when attempting to assess channel response to land use.     

Gradient irregularity in the herbert gorge of Northeastern Australia

The seventy-kilometre-long Herbert Gorge of northeastern Australia preserves a record of past floods in slackwater deposits and palaeostage indicators. Step-backwater modelling of water-surface profiles indicates that discharges ranging from 11000 to 17000 m³s^?1 have occurred six times in the gorge during the last 900 years. These flood reconstructions provide insight into the role of extreme flows in shaping bedrock channel morphology. In particular, the hydraulics of extreme flows can be related to boulder transport, and to the location of large boulder bars. Large boulder bars occur throughout the Herbert Gorge, being best developed at loci of stream power minima along the inside of bends, at tributary junctions, and at obstructions in the channel caused by bedrock highs. Only the flows exceeding approximately 8000 m³ s^?1 are competent to transport the boulders which constitute the bars. In the straight channel reaches, the boulder accumulations and bedrock highs have a fairly regular spacing which appears to be independent of lithologic or structural controls. The bars provide an efficient means of energy dissipation, and they are interpreted as a result of the inherent high turbulence of flow in a steep channel. The regular spacing of the bars, and their correspondence with the hydraulics of large flows, suggest that the bars and associated bedrock highs may represent a self-regulating mechanism akin to the pool-riffle sequence of alluvial channels. It may therefore be appropriate to view bedrock channels as deformable on the timescale of extreme discharges.     

The linkage between velocity patterns and sediment entrainment in a forced‐pool and riffle unit

A field‐based project was initiated in order to characterize velocities and sediment entrainment in a forced‐pool and riffle sequence. Three‐dimensional velocities and turbulence intensities were measured with an acoustic Doppler velocimeter at 222 different points at three similar flows that averaged approximately 4·35 m³ s⁻¹ within a large pool–riffle unit on North Saint Vrain Creek, Colorado. Sediment‐sorting patterns were observed with the introduction of 500 tracer particles painted according to initial seeding location. Tracer particles moved sporadically during a 113 day period in response to the annual snowmelt peak flow, which reached a maximum level of 14·8 m³ s⁻¹. Velocity data indicate high instantaneous velocities and turbulence levels in the centre of pools. Patterns of sediment deposition support the notion that stream competence is higher in the pool than the downstream riffle. Flow convergence around a large channel constriction appears to play a major role in multiple processes that include helical flow development and sediment routing, and backwater development with low velocities and turbulence levels above the constriction that may locally limit sediment supply. Jet flow, flow separation, vortex scour and turbulence generation enhance scour in the centre of pools. Ultimately, multiple processes appear to play some role in maintenance of this forced pool and the associated riffle. Copyright © 2008 John Wiley & Sons, Ltd.     

Reflections on the history of research on large wood in rivers

Dynamics and functions of large wood have become integral considerations in the science and management of river systems. Study of large wood in rivers took place as monitoring of fish response to wooden structures placed in rivers in the central United States in the early 20th century, but did not begin in earnest until the 1970s. Research has increased in intensity and thematic scope ever since. A wide range of factors has prompted these research efforts, including basic understanding of stream systems, protection and restoration of aquatic ecosystems, and environmental hazards in mountain environments. Research and management have adopted perspectives from ecology, geomorphology, and engineering, using observational, experimental, and modelling approaches. Important advances have been made where practical information needs converge with institutional and science leadership capacities to undertake multi-pronged research programmes. Case studies include ecosystem research to inform regulations for forest management; storage and transport of large wood as a component in global carbon dynamics; and the role of wood transport in environmental hazards in mountain regions, including areas affected by severe landscape disturbances, such as volcanic eruptions. As the field of research has advanced, influences of large wood on river structures and processes have been merged with understanding of streamflow and sediment regimes, so river form and function are now viewed as involving the tripartite system of water, sediment, and wood. A growing community of researchers and river managers is extending understanding of large wood in rivers to climatic, forest, landform, and social contexts not previously investigated. © 2020 John Wiley & Sons, Ltd.     

Wood and sediment storage and dynamics in river corridors

Large wood along rivers influences entrainment, transport, and storage of mineral sediment and particulate organic matter. We review how wood alters sediment dynamics and explore patterns among volumes of in‐stream wood, sediment storage, and residual pools for dispersed pieces of wood, logjams, and beaver dams. We hypothesized that: volume of sediment per unit area of channel stored in association with wood is inversely proportional to drainage area; the form of sediment storage changes downstream; sediment storage correlates with wood load; the residual volume of pools created in association with wood correlates inversely with drainage area; and volume of sediment stored behind beaver dams correlates with pond area. Lack of data from larger drainage areas limits tests of these hypotheses, but the analyses suggest that sediment volume correlates positively with drainage area and wood volume. The form of sediment storage in relation to wood appears to change downstream, with wedges of sediment upstream from jammed steps most prevalent in small, steep channels and more dispersed sediment storage in lower gradient channels. Pool volume correlates positively with wood volume and negatively with channel gradient. Sediment volume correlates well with beaver pond area. More abundant in‐stream wood and beaver populations present historically equated to greater sediment storage within river corridors and greater residual pool volume. One implication of these changes is that protecting and re‐introducing wood and beavers can be used to restore rivers. This review of the existing literature on wood and sediment dynamics highlights the lack of studies on larger rivers. Copyright © 2016 John Wiley & Sons, Ltd.     

Evaluating carbon storage on subalpine lake deltas

Mountainous regions are important contributors to the terrestrial organic carbon (OC) sink that affect global climate through the regulation of carbon‐based greenhouse gases. However, mountain OC dynamics are poorly quantified. We quantified OC storage in subalpine lake deltas in the Washington Central Cascades and Colorado Front Range with the objectives of determining the magnitude of transient carbon storage and understanding the differences in storage between the two ranges. We used field, laboratory, and GIS techniques to determine the magnitude of and controls on the subalpine lake delta OC pool in 26 subalpine lake deltas. Soil moisture, soil texture, mean basin slope, and delta valley confinement are significantly correlated with soil carbon on deltas. Average soil OC concentration on subalpine lake deltas ranges from 3 to 41%, and stocks range from 140 to 1256 Mg C/ha. Surprisingly, the carbon content of subalpine lake deltas is not significantly different between the two regions, despite stark contrasts in their climate, vegetation, and total ecosystem carbon stocks. We present a conceptual model that invokes geomorphic and biogeochemical processes to suggest that carbon is more likely to reach subalpine lake deltas from the upstream basin in the Colorado Front Range compared with the Washington Central Cascades, thus accounting for the similarity in OC storage between the two regions despite differences in total ecosystem carbon stocks and climate. This points to a complex interaction among carbon production, transport, and stability in each region, and supports the idea that geomorphic and biogeochemical processes determine the magnitude of transient OC storage more strongly than primary productivity or climate. Copyright © 2017 John Wiley & Sons, Ltd.     

Downstream effects of stream flow diversion on channel characteristics and riparian vegetation in the Colorado Rocky Mountains,USA

Flow diversions are widespread and numerous throughout the semi‐arid mountains of the western United States. Diversions vary greatly in their structure and ability to divert water, but can alter the magnitude and duration of base and peak flows, depending upon their size and management. Channel geometry and riparian plant communities have adapted to unique hydrologic and geomorphic conditions existing in the areas subject to fluvial processes. We use geomorphic and vegetation data from low‐gradient (≤3%) streams in the Rocky Mountains of north‐central Colorado to assess potential effects of diversion. Data were collected at 37 reaches, including 16 paired upstream and downstream reaches and five unpaired reaches. Channel geometry data were derived from surveys of bankfull channel dimensions and substrate. Vegetation was sampled using a line‐point intercept method along transects oriented perpendicular to the channel, with a total of 100 sampling points per reach. Elevation above and distance from the channel were measured at each vegetation sampling point to analyze differences in lateral and vertical zonation of plant communities between upstream and downstream reaches. Geomorphic data were analyzed using mixed effects models. Bankfull width, depth, and cross‐sectional area decreased downstream from diversions. Vegetation data were analyzed using biological diversity metrics, richness, evenness and diversity, as well as multivariate community analysis. Evenness increased downstream from diversions, through reduced frequency of wetland indicator species and increased frequency of upland indicator species. Probability of occurrence for upland species downstream of a diversion increases at a greater rate beginning around 0·5 m above active channel. The results suggest that channel morphology and riparian plant communities along low‐gradient reaches in montane environments in the Colorado Rocky Mountains are impacted by diversion‐induced flow alteration, with the net effect of simplifying and narrowing the channel and homogenizing and terrestrializing riparian plant communities. Copyright © 2014 John Wiley & Sons, Ltd.     

What should these rivers look like? Historical range of variability and human impacts in the Colorado Front Range,USA

Historical range of variability (HRV) describes the range of temporal and spatial variations in river variables such as flow regime or channel planform prior to intensive human alteration of the ecosystem. In mountainous river networks, HRV is most usefully applied to spatially differentiated geomorphic process domains with distinctive form and process. Using the Colorado Front Range as an example, three examples of how knowledge of HRV can assist river management and restoration are discussed. The examples involve instream wood load and channel morphology, beaver colonies and valley‐bottom form and process, and flow thresholds in regulated rivers. The question of what a river should look like – that is, what range of process and form the river included prior to intensive human alteration – can be addressed by (i) placing the river within a process domain, (ii) establishing correlations between form parameters that can be remotely sensed and reach‐scale process and form, so that the spatial extent, connectivity, and rarity of process domains within a river network or a region can be quickly assessed, (iii) inferring characteristics of the river prior to intensive alteration by documenting characteristics of the least altered reference rivers and by using proxy indicators of pre‐alteration conditions, and (iv) establishing process thresholds that must be exceeded to maintain form (e.g. flow thresholds to mobilize bed sediment). Once this context has been established, resource managers can better evaluate the options for restoring altered riverine form and function. Copyright © 2011 John Wiley & Sons, Ltd.