Numerical modeling for analyzing thermal surface anomalies induced by underground coal fires

Coal seams burning underneath the surface are recognized all over the world and have drawn increasing public attention in the past years. Frequently, such fires are analyzed by detecting anomalies like increased exhaust gas concentrations and soil temperatures at the surface. A proper analysis presumes the understanding of involved processes, which determine the spatial distribution and dynamic behavior of the anomalies.In this paper, we explain the relevance of mechanical and energy transport processes with respect to the occurrence of temperature anomalies at the surface. Two approaches are presented, aiming to obtain insight into the underground coal fire situation: In-situ temperature mapping and numerical simulation. In 2000 to 2005, annual temperature mapping in the Wuda (Inner Mongolia, PR China) coal fire area showed that most thermal anomalies on the surface are closely related to fractures, where hot exhaust gases from the coal fire are released. Those fractures develop due to rock mechanical failure after volume reduction in the seams. The measured signals at the surface are therefore strongly affected by mechanical processes.More insight into causes and effects of involved energy transport processes is obtained by numerical simulation of the dynamic behavior of coal fires. Simulations show the inter-relation between release and transport of thermal energy in and around underground coal fires. Our simulation results show a time delay between the coal fire propagation and the observed appearance of the surface temperature signal. Additionally, the overall energy flux away from the burning coal seam into the surrounding bedrock is about 30-times higher than the flux through the surface. This is of particular importance for an estimation of the energy released based on surface temperature measurements. Finally, the simulation results also prove that a fire propagation rate estimated from the interpretation of surface anomalies can differ from the actual rate in the seam.     

Why exobiology on Mars?

Processing of organic molecules by liquid water was probably an essential requirement towards the emergence of terrestrial primitive life. According to Oparin's hypothesis, organic building blocks required for early life were produced from simple organic molecules formed in a primitive reducing atmosphere. Geochemists favour now a less reducing atmosphere dominated by carbon dioxide. In such an atmosphere, very few building blocks are formed. Import of extraterrestrial organic molecules may represent an alternative supply. Experimental support for such an alternative scenario is examined in comets, meteorites and micrometeorites. The early histories of Mars and Earth clearly show similarities. Liquid water was once stable on the surface of Mars attesting the presence of an atmosphere capable of decelerating C-rich micro-meteorites. Therefore, primitive life may have developed on Mars, as well. Liquid water disappeared from the surface of Mars very early, about 3.8 Ga ago. The Viking missions did not find, at the surface of the Martian soil, any organic molecules or clear-cut evidence for microbial activities such as photosynthesis, respiration or nutrition. The results can be explained referring to an active photochemistry of Martian soil driven by the high influx of solar UV. These experiments do not exclude the existence of organic molecules and fossils of micro-organisms which developed on early Mars until liquid water disappeared. Mars may store below its surface some well preserved clues of a still hypothetical primitive life.     

Deciphering late Devonian–early Carboniferous P–T–t path of mylonitized garnet-mica schists from Prins Karls Forland,Svalbard

Quartz-in-garnet inclusion barometry integrated with trace element thermometry and calculated phase relations is applied to mylonitized schists of the Pinkie unit cropping out on the island of Prins Karls Forland, western part of the Svalbard Archipelago. This approach combines conventional and novel techniques and allows deciphering of the pressure–temperature (P–T) evolution of mylonitic rocks, for which the P–T conditions could not have been easily deciphered using traditional methods. The results obtained suggest that rocks of the Pinkie unit were metamorphosed under amphibolite facies conditions at 8–10 kbar and 560–630°C and mylonitized at ~500 to 550°C and 9–11 kbar. The P–T results are coupled with in-situ Th–U-total Pb monazite dating, which records amphibolite facies metamorphism at c. 359–355 Ma. This is the very first evidence of late Devonian–early Carboniferous metamorphism in Svalbard and it implies that the Ellesmerian Orogeny on Svalbard was associated with metamorphism up to amphibolite facies conditions. Thus, it can be concluded that the Ellesmerian collision between the Franklinian margin of Laurentia and Pearya and Svalbard caused not only commonly accepted brittle deformation and weak greenschist facies metamorphism, but also a burial and deformation of rock complexes at much greater depths at elevated temperatures.     

Historical pollution trends in a disturbed, estuarine sedimentary environment, SW Sweden

The objective of this article is to determine whether pollution trends can be reconstructed from sediments in the outer Göta älv estuary. Detailed interpretation of heavy metal profiles in the recent sediment, in combination with profiles of ²¹⁰Pb- and ¹³⁷Cs-activity, organic carbon content and grain size distribution, allows estimation of historical trends. This is based on the assumption that only certain intervals, which can be identified, are disturbed. The sediment data are compared with archive data on historical trends in emissions of heavy metals. Special attention is given to mercury, which shows high enrichment over long periods of time. It is found that the most polluted sediments were deposited between 1930 and 1980, but that episodic discharges have also occurred more recently. Nevertheless, the effects of remediation since the 1970s are apparent.     

Geometry and chronology of growth and drowning of Middle Triassic carbonate platforms (Cernera and Bivera/Clapsavon) in the Southern Alps (northern Italy)

The depositional architecture and the geometric relationships between platform-slope deposits and basinal sediments along with paleontological evidence indicate the time interval of the younger Anisian Reitziites reitzi ammonoid zone to largely represent the main stage of platform aggradation at the Cernera and Bivera/Clapsavon carbonate platforms. Published and new U-Pb age data of zircons from volcaniclastic layers bracketing the stratigraphic interval of platform growth constrain the duration of platform evolution to a time span shorter than 1.8±0.7m.y., probably in the order of 0.5-1m.y., reflecting fast rates of vertical platform aggradation exceeding 500 m/m.y. In the range of growth potentials for shallow-water carbonate systems estimated in relation to the time span of observation, this high rate is in agreement with values for short intervals of 10⁵-10⁶yrs (e.g., Schlager 1999). After drowning, the platforms at Cernera and Bivera/Clapsavon were blanketed by thin pelagic carbonates. On the former platform flanks the draping sediments in places comprise red nodular pelagic limestones (Clapsavon Limestone) similar in facies to the Han Bulog Limestones occurring elsewhere in Middle Triassic successions of the Mediterranean Tethys. The drowning of vast areas of former carbonate platforms possibly triggered the onset of bottom-water circulation in adjacent basins as suggested by the abrupt transition from laminated to bioturbated pelagic nodular limestones in the Buchenstein Formation which occurred close to the time of initial platform submergence. During the Late Ladinian the topographic features of the drowned platforms were onlapped by rapidly deposited, predominantly clastic successions including coarse breccias and volcanic rocks sealing and preserving the peculiar stratigraphic setting.     

A Rhaetian 40Ar/39Ar age for the Rochechouart impact structure (France) and implications for the latest Triassic sedimentary record

Abstract– ⁴⁰Ar/³⁹Ar dating of potassium feldspar (primary spherulitic‐blocky and secondary idiomorphic K‐feldspar) separated from impact‐metamorphosed gneiss found near Videix in the western central part of the Rochechouart impact structure (NW Massif Central, France) yielded a Rhaetian combined age of 201 ± 2 Ma (2σ), indistinguishable within uncertainty from the age of the Triassic/Jurassic boundary. Ballen quartz intergrown with the primary K‐feldspar indicates post‐shock temperatures exceeding approximately 1000 °C that affected the precursor gneiss. Geochemically, both feldspar types represent essentially pure potassium end‐members. Apart from the approximately 15 km diameter impact deposit area, the youngest crystallization age known for basement rocks in this part of the Massif Central is approximately 300 Ma. No endogenic magmatic‐thermal events are known to have occurred later in this region. The K‐feldspar recrystallized from local feldspar melts and superimposed post‐shock hydrothermal crystallization, probably within some thousands of years after the impact. It is, therefore, suggested that the ⁴⁰Ar/³⁹Ar age for the Videix gneiss (as a potassic “impact metasomatite”) dates the Rochechouart impact, in consistence with evidence for K‐metasomatism in the Rochechouart impactites. The new age value is distinctly younger than the previously obtained Karnian–Norian age for Rochechouart and, thus, contradicts the Late Triassic multiple impact theory postulated some years ago. In agreement with the paleogeographic conditions in the western Tethys domain around the Triassic/Jurassic boundary, the near‐coastal to shallow marine Rochechouart impact is compatible with the formation of seismites and tsunami deposits in the latest Triassic of the British Isles and possible related deposits in other parts of Europe.     

Establishing a 14.6 ± 0.2 Ma age for the Nördlinger Ries impact (Germany)—A prime example for concordant isotopic ages from various dating materials

Abstract– ⁴⁰Ar/³⁹Ar dating of recrystallized K‐feldspar melt particles separated from partially molten biotite granite in impact melt rocks from the approximately 24 km Nördlinger Ries crater (southern Germany) yielded a plateau age of 14.37 ± 0.30 (0.32) Ma (2σ). This new age for the Nördlinger Ries is the first age obtained from (1) monomineralic melt (2) separated from an impact‐metamorphosed target rock clast within (3) Ries melt rocks and therewith extends the extensive isotopic age data set for this long time studied impact structure. The new age goes very well with the ⁴⁰Ar/³⁹Ar step‐heating and laser probe dating results achieved from mixed‐glass samples (suevite glass and tektites) and is slightly younger than the previously obtained fission track and K/Ar and ages of about 15 Ma, as well as the K/Ar and ⁴⁰Ar/³⁹Ar age data obtained in the early 1990s. Taking all the ⁴⁰Ar/³⁹Ar age data obtained from Ries impact melt lithologies into account (data from the literature and this study), we suggest an age of 14.59 ± 0.20 Ma (2σ) as best value for the Ries impact event.     

40Ar‐39Ar step‐heating of impact glasses from the Nördlinger Ries impact crater—Implications on excess argon in impact melts and tektites

Seven impact melts from various places in the Nördlinger Ries were dated by ⁴⁰Ar‐³⁹Ar step‐heating. The aim of these measurements was to increase the age data base for Ries impact glasses directly from the Ries crater, because there is only one Ar‐Ar step‐heating spectrum available in the literature. Almost all samples display saddle‐shaped age spectra, indicating the presence of excess argon in most Ries glass samples, most probably inherited argon from incompletely degassed melt and possibly also excess argon incorporated during cooling from adjacent phases. In contrast, moldavites usually contain no inherited argon, probably due to their different formation process implying solidification during ballistic transport. The plateau age of the only flat spectrum is 14.60 ± 0.16 (0.20) Ma (2σ), while the total age of this sample is 14.86 ± 0.20 (0.22) Ma (isochron age: 14.72 ± 0.18 [0.22] Ma [2σ]), proofing the chronological relationship of the Ries impact and moldavites. The total ages of the other samples range between 15.77 ± 0.52 and 20.4 ± 1.0 Ma (2σ), implying approximately 2–40% excess ⁴⁰Ar (compared to the nominal age of the Ries crater) in respective samples. Thus, the age of 14.60 ± 0.16 (0.20) (2σ) (14.75 ± 0.16 [0.20 Ma] [2σ], calculated using the most recent suggestions for the K decay constants) can be considered as reliable and is within uncertainties indistinguishable from the most recent compilation for the age of the moldavite tektites.