What type was SN 1987A?

A comparison is made of the light and colour curves of the SN 1987A in the first 280 days with the mean properties of type II supernovae. The conclusion is that even though it has H lines, and was not a typical type II supernova, but a peculiar object from a photometric point of view. The implications for inclusion of SN 1987A in the context of the usual Minkowski-Zwicky classification are explicitly discussed.     

An analysis of 3.5 kHz acoustic reflections and sediment physical properties

Near-bottom normal incidence acoustic reflection data and sediment physical property data are used to study the relationships between acoustic reflections and sediment physical properties. A pinger-hydrophone experiment was performed to obtain the necessary acoustic reflection data. In addition, a standard piston core was retrieved in the acoustic survey area for physical property analysis. The piston core was sampled and 13 properties were measured at 55 locations within the top 12 m of the core. Correlation studies amongst the sediment physical properties resulted in the following strong correlations: acoustic impedance ($\text{Z}$) and porosity ($\text{N}$), (0.96); water content ($\text{WC}$) and $\text{Z}$, (0.95); bulk density ($\text{BD}$) and $\text{Z}$, (0.99).The empirical orthonormal function (EOF) method was employed for acoustic signal analysis. This method assumes no a-priori models of the sediment or causality. The EOF method reduced the acoustic data to 8 functions that contained 97.6% of the sample variance. The EOFs were subsequently analysed by using cepstrum analysis which reveals time delay information and enhances detecting zones of reflectivity. The result of the sediment physical property and cepstrum analysis indicates that zones of reflectivity are essentially zones of relatively high acoustic impedance, low porosity, and low phi (high mean grain size).     

Extension of the solution of Kepler's equation to high eccentricities

The classic Lagrange's expansion of the solutionE(e, M) of Kepler's equation in powers of eccentricity is extended to highly eccentric orbits, 0.6627 ... <e<1. The solutionE(e, M) is developed in powers of (e–e*), wheree* is a fixed value of the eccentricity. The coefficients of the expansion are given in terms of the derivatives of the Bessel functionsJ _n (ne). The expansion is convergent for values of the eccentricity such that |e–e*|<(e*), where the radius of convergence (e*) is a positive real number, which is calculated numerically.     

Holocene record of productivity in the NW Iberian continental shelf

A multiproxy approach (textural characteristics, heavy metal concentrations and benthic foraminifera data) was adopted to study the OMEX core KSGX 40, collected at the Galicia Mud Deposit (NW Iberian outer continental shelf) and recording the last ca. 4.8 ka cal BP. Geochemical profiles of Fe, Mn, Zn, Co, Cr, Cu, Ni, Pb, Al and Ca show significant temporal variations. Benthic foraminifera productivity proxy suggests that the recorded muddy events were contemporaneous of a higher C_org flux to the marine benthic environment. The higher flux of organic matter, following a long-term intensification of the upwelling and coinciding with a finer sedimentation, led to depressed levels of oxygen beneath the water-sediments interface and to early diagenetic processes of several redox-sensitive elements.     

Study of geothermal water intrusion due to groundwater exploitation in the Puebla Valley aquifer system, Mexico

Significant intrusion of geothermal water into fresh groundwater takes place in the Puebla Valley aquifer system, Mexico. The decline in the potentiometric surface due to the overexploitation of the groundwater induces this intrusion. This hydrological system comprises three aquifers located in Plio-Quaternary volcanic sediments and Mesozoic calcareous rocks. The hydraulic balance of the aquifer shows that the annual output exceeds the natural inputs by 12 million m³. Between 1973 and 2002, a drop in the potentiometric surface, with an 80 m cone of depression, was identified in a 5-km-wide area located southwest of the city of Puebla. Chemical analyses performed on water samples since 1990 have shown an increase in total dissolved solids (TDS) of more than 500 mg/L, coinciding with the region showing a cone of depression in the potentiometric surface. A three-dimensional flow and transport model, based on the hydrogeological and geophysical studies, was computed by using the MODFLOW and MT3D software. This model reproduces the evolution of the aquifer system during the last 30 years and predicts for 2010 an additional drawdown in the potentiometric surface of 15 m, and an increase in the geothermal water intrusion.     

Development of site-specific design ground motions in Western and Eastern North America

This paper presents results recently obtained for generating site-specific ground motions needed for design of critical facilities. The general approach followed in developing these ground motions using either deterministic or probabilistic criteria is specification of motions for rock outcrop or very firm soil conditions followed by adjustments for site-specific conditions. Central issues in this process include development of appropriate attenuation relations and their uncertainties, differences in expected motions between Western and Eastern North America, and incorporation of site-specific adjustments that maintain the same hazard level as the control motions, while incorporating uncertainties in local dynamic material properties. For tectonically active regions, such as the Western United States (WUS), sufficient strong motion data exist to constrain empirical attenuation relations for M up to about 7 and for distances greater than about 10–15 km. Motions for larger magnitudes and closer distances are largely driven by extrapolations of empirical relations and uncertainties need to be substantially increased for these cases.

For the Eastern United States (CEUS), due to the paucity of strong motion data for cratonic regions worldwide, estimation of strong ground motions for engineering design is based entirely on calibrated models. The models are usually calibrated and validated in the WUS where sufficient strong motion data are available and then recalibrated for applications to the CEUS. Recalibration generally entails revising parameters based on available CEUS ground motion data as well as indirect inferences through intensity observations. Known differences in model parameters such as crustal structure between WUS and CEUS are generally accommodated as well. These procedures are examined and discussed.     

Throughfall patterns in sugarcane and riparian forest: understanding the effect of sugarcane age and land use conversion

Sugarcane is an annual crop with a dynamic canopy that changes over time mainly because of genetic adaptation. There is uncertainty about the temporal trends of throughfall (TF) in this important commercial crop. In the present paper, we used troughs to measure TF in a third and fourth ratoon and subsequently in a fourth and fifth ratoon. Additional measurements were carried out in an adjacent riparian forest. There were no significant differences between cycles of sugarcane, growth phases and riparian forest. The TF results for ratoon crop and riparian forest in 2011/2012 were 76% and 79.5% of gross rainfall, respectively, while in 2012/2013, they were 79% and 78%, respectively. However, TF was remarkably lower in the riparian forest relative to ratoon from the second half of the culm formation and elongation phase (280 days after harvest) until harvest. Copyright © 2016 John Wiley & Sons, Ltd.     

Construction of Structural Geological Model Using Monte Carlo Simulation

Geotechnical and Geological Engineering - To optimize the prediction of structural geological conditions in the underground as of data collected at the surface, due to the usual great uncertainties...     

Particle composition and size distributions in and around a deep-pit swine operation,Ames, IA

The contribution of emissions from agricultural facilities is rapidly becoming a major concern for local and regional air quality. Characterization of particle properties such as physical size distribution and chemical composition can be valuable in understanding the processes contributing to emissions and ultimate fate of particulate matter from agricultural facilities. A measurement campaign was conducted at an Iowa, deep-pit, three-barn swine finishing facility to characterize near-source ambient particulate matter. Size-specific mass concentrations were determined using minivol samplers, with additional size distribution information obtain using optical particle counters. Particulate composition was determined via ion chromatographic analysis of the collected filters. A thermal-CO₂ elemental/organic carbon analyzer measured particulate carbon. The chemical composition and size distribution of sub-micron particles were determined via real-time aerosol mass spectrometry. Primary particulate was not found to be a major emission from the examined facility, with filter-based impactor samples showing average near-source increases (~15–50 m) in ambient PM₁₀ of 5.8 ± 2.9 μg m⁻³ above background levels. PM_2.5 also showed contribution attributable to the facility (1.7 ± 1.1 μg m⁻³). Optical particle counter analysis of the numerical size distributions showed bimodal distributions for both the upwind and downwind conditions, with maximums around 2.5 μm and below the minimum quantified diameter of 0.3 μm. The distributions showed increased numbers of coarse particles (PM₁₀) during periods when wind transport came from the barns, but the differences were not statistically significant at the 95% confidence level. The PM₁₀ aerosols showed statistically increased concentrations of sulfate, nitrate, ammonium, calcium, organic carbon, and elemental carbon when the samplers were downwind from the pig barns. Organic carbon was the major constituent of the barn-impacted particulate matter in both sub-micron (54%) and coarse size (20%) ranges. The AMS PM₁ chemical speciation showed similar species increases, with the exception of and Ca⁺², the latter not quantified by the AMS.