High‐resolution reconstruction of a coastal barrier system: impact of Holocene sea‐level change

This study presents a detailed reconstruction of the sedimentary effects of Holocene sea‐level rise on a modern coastal barrier system. Increasing concern over the evolution of coastal barrier systems due to future accelerated rates of sea‐level rise calls for a better understanding of coastal barrier response to sea‐level changes. The complex evolution and sequence stratigraphic framework of the investigated coastal barrier system is reconstructed using facies analysis, high‐resolution optically stimulated luminescence and radiocarbon dating. During the formation of the coastal barrier system starting 8 to 7 ka rapid relative sea‐level rise outpaced sediment accumulation. Not before rates of relative sea‐level rise had decreased to ca 2 mm yr^?1 did sediment accumulation outpace sea‐level rise. From ca 5·5 ka, rates of regionally averaged sediment accumulation increased to 4·3 mm yr^?1 and the back‐barrier basin was filled in. This increase in sediment accumulation resulted from retreat of the barrier island and probably also due to formation of a tidal inlet close to the study area. Continued transgression and shoreface retreat created a distinct hiatus and wave ravinement surface in the seaward part of the coastal barrier system before the barrier shoreline stabilized between 5·0 ka and 4·5 ka. Back‐barrier shoreline erosion due to sediment starvation in the back‐barrier basin was pronounced from 4·5 to 2·5 ka but, in the last 2·5 kyr, barrier sedimentation has kept up with and outpaced sea‐level. In the last 0·4 kyr the coastal barrier system has been prograding episodically. Sediment accumulation shows considerable variation, with periods of rapid sediment deposition and periods of non‐deposition or erosion resulting in a highly punctuated sediment record. The study demonstrates how core‐based facies interpretations supported by a high‐resolution chronology and a well‐documented sea‐level history allow identification of depositional environments, erosion surfaces and hiatuses within a very homogeneous stratigraphy, and allow a detailed temporal reconstruction of a coastal barrier system in relation to sea‐level rise and sediment supply.     

Berm formation and dynamics on a gently sloping beach; the effect of water level and swash overtopping

Berm formation and morphological development of the beach face have been observed during a neap–neap tidal cycle on the gently sloping and accreting beach at Vejers, Denmark. During the field campaign, an intertidal bar migrated onshore and stabilized as a berm on the foreshore. A new intertidal bar occurred on the lower beach face, migrated onshore on the rising tide and finally merged with the pre‐existing berm. As the tide continued to rise, the new berm translated further onshore as an intertidal bar to the uppermost part of the foreshore. The sediment transport during the berm transition was onshore directed in the upper swash and offshore directed in the lower swash. This berm development can be described through both the neap‐berm, ridge‐and‐runnel and berm‐ridge development concepts proposed by Hine (Sedimentology 1979; 26: 333–351), and all three stages were observed during only three tidal cycles. The main factors controlling this fast transformation were the gentle slope of the cross‐shore profile, rapid water level translation rates, substantial swash overtopping of the berm, and low infiltration rates. Despite the onshore migration of intertidal bars and berm formation, no net foreshore accretion took place during the field campaign. This was largely due to the formation of rip channels with strong rip currents cutting through the intertidal bars and the berm, which acted as a sediment drain in the profile. Copyright © 2009 John Wiley & Sons, Ltd.     

Shallow gas depth-contour map of the Skagerrak-western Baltic Sea region

A shallow gas depth-contour map covering the Skagerrak-western Baltic Sea region has been constructed using a relatively dense grid of existing shallow seismic lines. The digital map is stored as an ESRI® shape file in order to facilitate comparison with other data from the region. Free gas usually occurs in mud and sandy mud but is observed only when sediment thickness exceeds a certain threshold value, depending on the water depth of the area in question. Gassy sediments exist at all water depths from approx. 20 m in the coastal waters of the Kattegat to 360 m in the Skagerrak. In spite of the large difference in water depths, the depth of free gas below seabed varies only little within the region, indicating a relatively fast movement of methane in the gas phase towards the seabed compared to the rate of diffusion of dissolved methane. Seeps of old microbial methane occur in the northern Kattegat where a relatively thin cover of sandy sediments exists over shallow, glacially deformed Pleistocene marine sediments. Previous estimates of total methane escape from the area may be correct but the extrapolation of local methane seepage rate data to much larger areas on the continental shelf is probably not justified. Preliminary data on porewater chemistry were compared with the free gas depth contours in the Aarhus Bay area, which occasionally suffers from oxygen deficiency, in order to examine if acoustic gas mapping may be used for monitoring the condition of the bay.     

Formation,fate and leaching of chloroform in coniferous forest soils

Chloroform is a common groundwater pollutant but also a natural compound in forest ecosystems. Leaching of natural chloroform from forest soil to groundwater was followed by regular analysis of soil air and groundwater from multilevel wells at four different sites in Denmark for a period of up to 4 a. Significant seasonal variation in chloroform was observed in soil air 0.5 m below surface ranging at one site from 120 ppb by volume in summer to 20 ppb during winter. With depth, the seasonal variation diminished gradually, ranging from 30 ppb in summer to 20 ppb during winter, near the groundwater table. Chloroform in the shallowest groundwater ranged from 0.5–1.5 μg L⁻¹ at one site to 2–5 μg L⁻¹ at another site showing no clear correlation with season. Comparing changes in chloroform in soil air versus depth with on-site recorded meteorological data indicated that a clear relationship appears between rain events and leaching of chloroform. Chloroform in top soil air co-varied with CO₂ given a delay of 3–4 weeks providing evidence for its biological origin. This was confirmed during laboratory incubation experiments which further located the fermentation layer as the most chloroform producing soil horizon. Sorption of chloroform to soils, examined using ¹⁴C–CHCl₃, correlated with organic matter content, being high in the upper organic rich soils and low in the deeper more minerogenic soils. The marked decrease in chloroform in soil with depth may in part be due to microbial degradation which was shown to occur at all depths by laboratory tests using ¹⁴C–CHCl₃.     

Performance of the In Situ Microcosm Technique for Measuring the Degradation of Organic Chemicals in Aquifers

An in situ microcosm (ISM) consists of a stainless steel cylinder isolating about 2 L of the aquifer and is equipped with valves allowing for loading and sampling from the ground surface. During the last five years, this technique has been used frequently to study the degradation of organic chemicals in polluted and pristine aquifers representing different redox environments. The ISM technique has great potential for providing field-relevant degradation potentials and rate constants, but care must be taken in using the equipment and interpreting the results. This paper provides details concerning the installation and operation of an ISM and presents experiences concerning data interpretation and monitoring of redox conditions.     

Is natrocarbonatite a cognate fluid condensate?

Natrocarbonatite flows in the crater of the volcano Oldoinyo Lengai (Tanzania) are the only carbonatite magmas observed to erupt and have provided strong arguments in favor of a magmatic origin for carbonatite. The currently favored explanation for the genesis of these carbonatites by liquid immiscibility between a silicate and a carbonatite melt is questioned based on the extremely low eruption temperatures of 544-593 °C and compositional and mineralogical characteristics not in agreement with experimental constraints. Experimental investigations of the relationship between Oldoinyo Lengai natrocarbonatite and related silicate rock compositions do indicate that alkali-bearing peralkaline carbonatite with liquidus calcite can form by liquid immiscibility. At the same time, these experiments result in evidence which speaks against a liquid immiscibility origin for the highly alkaline and peralkaline Oldoinyo Lengai natrocarbonatite. On the carbonatite side of the miscibility gap, fractional crystallization cannot account for a liquid evolution from alkali-bearing peralkaline carbonatite to highly alkaline natrocarbonatite. Such an evolution does not seem to be compatible with the liquidus mineral assemblages and the chemistry of Oldoinyo Lengai natrocarbonatite. No natural silicate magma is known to produce natrocarbonatite compositions by liquid immiscibility. The best interpretation of the Oldoinyo Lengai natrocarbonatite flows involves expulsion of a cognate, mobile, alkaline, and CO₂-rich fluid condensate. This conclusion is supported by recent studies of silicate and carbonatite melt inclusions in minerals of ultramafic alkaline complexes, trace element partitioning, isotopic constraints, and by experimental data on major element partitioning between coexisting H₂O-CO₂-rich fluid and carbonatitic melt. In contrast to all other suggested modes of formation, an origin of Oldoinyo Lengai natrocarbonatite from cognate fluid appears best to be in agreement with the field observations, the petrography, mineralogy, and geochemistry of Oldoinyo Lengai natrocarbonatite and the dynamics of the Oldoinyo Lengai natrocarbonatite extrusion.     

Swash saturation: an assessment of available models

An extensive previously published (Hughes et al. Mar Geol 355, 88–97, 2014) field data set representing the full range of micro-tidal beach states (reflective, intermediate and dissipative) is used to investigate swash saturation. Two models that predict the behavior of saturated swash are tested: one driven by standing waves and the other driven by bores. Despite being based on entirely different premises, they predict similar trends in the limiting (saturated) swash height with respect to dependency on frequency and beach gradient. For a given frequency and beach gradient, however, the bore-driven model predicts a larger saturated swash height by a factor 2.5. Both models broadly predict the general behavior of swash saturation evident in the data, but neither model is accurate in detail. While swash saturation in the short-wave frequency band is common on some beach types, it does not always occur across all beach types. Further work is required on wave reflection/breaking and the role of wave-wave and wave-swash interactions to determine limiting swash heights on natural beaches.     

Decadal behaviour of a washover fan,Skallingen Denmark

In this study, the decadal evolution of a washover fan on the west coast of Denmark is examined from its initial generation in 1990 until 2015. Since its inception, the bare and flat washover fan surface has recovered and accreted slowly due to re-activation by overwash during surges and due to aeolian activity and dune formation, stimulated by vegetation growth. The volume of sand on the washover has increased steadily at an average rate of about 23 m³/yr per unit length of shoreline, and a total of 175,000 m³ of sand is now deposited on the fan, while at the same time the shoreline has receded by some 250 m. The evolution can be divided into three stages: 1) An initiation phase when storm surge levels and energetic wave conditions caused a breach in the foredunes and overwash processes formed a washover fan with a relatively low elevation above mean sea level; 2) An initial recovery phase during which waves supplied sand to the fan during frequent overwash activity and winds transported this sand into marginal dunes surrounding the fan; and 3) A later recovery phase when the surface of the fan had accreted to a level where vegetation could survive and trap sediment into new foredune growth across the fan. The rate of accretion has been overall linear but scales with neither annual overwash frequency, nor with aeolian transport potential. Instead, the linear accretion is more closely related to the steady onshore migration of nearshore bars that weld to the beach and provide a sand supply for transfer to the fan. The fan evolution demonstrates the importance of washover fans in preserving barrier resilience during transgressional phases caused by increasing mean sea level. © 2019 John Wiley & Sons, Ltd.