In situ strength measurements on natural upper-mantle minerals

Using in situ strength measurements at pressures up to 10 GPa and at room temperature, 400, 600, and 700°C, we examined rheological properties of olivine, orthopyroxene, and chromian-spinel contained in a mantle-derived xenolith. Mineral strengths were estimated using widths of X-ray diffraction peaks as a function of pressure, temperature, and time. Differential stresses of all minerals increase with increasing pressure, but they decrease with increasing temperature because of elastic strain on compression and stress relaxation during heating. During compression at room temperature, all minerals deform plastically at differential stress of 4–6 GPa. During subsequent heating, thermally induced yielding is observed in olivine at 600°C. Neither orthopyroxene nor spinel shows complete stress relaxation, but both retain some stress even at 700°C. The strength of the minerals decreases in the order of chromian-spinel ≈ orthopyroxene > olivine for these conditions. This order of strength is consistent with the residual pressure of fluid inclusions in mantle xenoliths.     

Near-infrared and Visible Light Microthermometry of Fluid Inclusions in Sphalerite from a Possible Southeast Extension of the Toyoha Polymetallic Deposit, Japan

Abstract. Near-infrared (NIR) and visible light microthermometry was applied to the fluid inclusions in sphalerite from a possible southeast extension of the Toyoha polymetallic deposit. Sphalerite occurs as euhedral-subhedral crystals or collo-form aggregates with a variety of color, which contain a well-developed growth banding. Combined with morphological observations, fluid inclusions in dark-colored sphalerite were examined using a near-infrared light microscopic technique, whereas those in light-colored sphalerite and quartz were examined by a conventional visible light microscopy.
Salinities of fluid inclusions in dark-colored sphalerite have a wide variation (1.0–10.3 wt % NaCl equiv.) compared to that in light-colored sphalerite and quartz (0.0–3.4 wt % NaCl equiv.). These variations suggest that the conventional microthermometric data from light-colored sphalerite and quartz were inadequate to interpret the ore formation process. Dark-colored colloform sphalerite and a dark core of subhedral sphalerite formed from high-salinity fluids (6.5–10.3 wt % NaCl equiv.) under highly supersaturated conditions with respect to sphalerite.
The NIR and visible light microthermometry of fluid inclusions in sphalerite combined with its morphological observations is an invaluable method to infer the formation conditions of sphalerite. The NIR and visible light microthermometry is useful to reveal how the nature of ore fluids changed with time.     

Atoll island vulnerability to flooding and inundation revealed by historical reconstruction: Fongafale Islet, Funafuti Atoll, Tuvalu

The reef islands formed on coral atolls are generally small, low, and flat, with elevations of only a few meters. These islands are thus highly vulnerable to elevated sea levels caused by extreme events and global warming. Such vulnerability was recently evidenced at Fongafale Islet, the capital of Tuvalu, when it flooded during accelerated spring high tides possibly related to sea level rise caused by global warming. Many factors, not only environmental but also economic and social, determine the vulnerability of an island to sea level rise. In this study, we used data spanning 108 yrs to reconstruct changes in topography, land use/cover, population, and the distribution of buildings at Fongafale Islet. The results indicate that the vulnerability of Fongafale Islet relates to its original landform characteristics: the central part of the island was formerly dominated by swampland that flooded at high tides. Fongafale Islet experienced greater population in-migration and centralization beginning in the 1970s following the independence of Tuvalu and Kiribati. Migrants were also responding to declines in overseas mining operations and limited options for paid employment. As the population increased, construction took place in vulnerable swampland areas. Our results clearly demonstrate that examinations of global environmental issues should focus on characteristics specific to the region of interest. These characteristics should be specified using historical reconstruction to understand and address the vulnerability of an area to global environmental changes.     

Relationship between faults and generation of inland shallow earthquakes: enlightenment of the M=7.2 southern Hyogo prefecture earthquake

The M=7.2 southern Hyogo prefecture earthquake, which occurred on January 17, 1995, destroyed the region severely. Further researches are necessary to explain the problems obtained from this earthquake. We have discussed some characteristics correlating with this earthquake, such as distribution of aftershocks and disaster, relationship between fault and generation of inland shallow earthquakes, strong motion and so on. The tectonic movements of surface faults may be different from those of deep faults. Earthquakes may not be restricted directly by the tectonic movements of surface faults. The strong motion zone is often appeared in the region a little away from the both ends or from the single side of a fault instead of the region of a focal fault. Some mechanisms of strong motion have also been discussed.     

Petrographic and mineralogical study of hydrothermal alteration of the Rokko Granite at Hakusui-kyo and Horai-kyo along the Arima-Takatsuki Tectonic Line in western Japan

Field, hand specimen, and microscopic investigations alongside X-ray diffraction analyses revealed four types of hydrothermal alteration (Type-A, -B, -C, and -D) based on the mode of occurrence of altered rocks and alteration mineral assemblage at Hakusui-kyo and Horai-kyo along the Arima-Takatsuki Tectonic Line (ATTL) in western Japan. Type-A alteration locally occurred as gray alteration halos with sulfide minerals. Type-B and -C alterations were confined to fault gouge veins and occurred as greenish-gray veins and brown veins, respectively. Type-C alteration crosscut Type-B alteration. These alterations were associated with a number of granitic fragments including cohesive breccia and micrographic facies. Type-D alteration occurred locally in brown sediments. Different mineralogical features in the four alterations are summarized as (Type-A) illite; (Type-B) chlorite; (Type-C) limonite (Fe³⁺ hydroxides and goethite) and calcite; and (Type-D) limonite. We propose that the alterations can be broadly divided into Paleocene hydrothermal alteration (Type-A) and post-Late Miocene hydrothermal alteration (Type-B, -C, and -D): Type-A alteration occurred at approximately 200 °C during hydrothermal activity after a granitic intrusion in Late Cretaceous; Type-B, -C and -D alterations occurred under hydrothermal activity accompanying deep fluids with repeated ascents invoked by the seismicity of the ATTL after the Late Miocene. The fluids may have been the “Arima-type thermal waters” (i.e., mixtures of convective groundwater and Na-Ca-Cl-HCO₃-type fluids). Type-B alteration occurred in fractures at depths where the temperature was ≥150 °C. Type-C alteration overprinted Type-B alteration as a result of mixing of new deep fluids and descending oxidized meteoric water near the surface. Fe³⁺ hydroxides and calcite precipitated from the fluids due to the oxidation of Fe²⁺ and the degassing of CO₂, respectively, at ambient to near-boiling temperatures. When the ascending fluids gushed out from the fractures, they generated Type-D alteration at the surface under similar temperature conditions due to the oxidation of Fe²⁺.     

Radiative Heat Transfer and Hydrostatic Stability in Nocturnal Fog

We have performed a one-dimensional and transient radiative heat transfer analysis in order to investigate interaction between atmospheric radiation and convective instability within a nocturnal fog. The radiation element method using the Ray Emission Model (REM²), which is a generalized numerical method, in conjunction with a line-by-line (LBL) method, is employed to attain high spectral resolution calculations for anisotropically scattering fog. The results show that the convective instability has a strong dependence on radiative properties of the fog. For the condition of a 20-m droplet diameter and liquid water content of 0.1 × 10^–3 kg m^–3;, the temperature profile within the fog becomes S shaped, and a convective instability layer forms in the middle or lower level of the fog. However, for the same water content and a 40-m diameter droplet, no strong convective instability layer forms, whereas for a 10-m diameter droplet a strong convective instability is observed.     

Phase relation of CaSO<Subscript>4</Subscript> at high pressure and temperature up to 90 GPa and 2300 K

Calcium sulfate (CaSO₄), one of the major sulfate minerals in the Earth’s crust, is expected to play a major role in sulfur recycling into the deep mantle. Here, we investigated the crystal structure and phase relation of CaSO₄ up to ~90 GPa and 2300 K through a series of high-pressure experiments combined with in situ X-ray diffraction. CaSO₄ forms three thermodynamically stable polymorphs: anhydrite (stable below 3 GPa), monazite-type phase (stable between 3 and ~13 GPa) and barite-type phase (stable up to at least 93 GPa). Anhydrite to monazite-type phase transition is induced by pressure even at room temperature, while monazite- to barite-type transition requires heating at least to 1500 K at ~20 GPa. The barite-type phase cannot always be quenched from high temperature and is distorted to metastable AgMnO₄-type structure or another modified barite structure depending on pressure. We obtained the pressure–volume data and density of anhydrite, monazite- and barite-type phases and found that their densities are lower than those calculated from the PREM model in the studied P–T conditions. This suggests that CaSO₄ is gravitationally unstable in the mantle and fluid/melt phase into which sulfur dissolves and/or sulfate–sulfide speciation may play a major role in the sulfur recycling into the deep Earth.     

Open and coastal seas interactions south of Japan represented by an ensemble Kalman filter

We investigated the feasibility of the ensemble Kalman filter (EnKF) to reproduce oceanic conditions south of Japan. We have adopted the local ensemble transformation Kalman filter algorithm based on 20 members’ ensemble simulations of the parallelized Princeton Ocean Model (the Stony Brook Parallel Ocean Model) with horizontal resolution of 1/36°. By assimilating satellite sea surface height anomaly, satellite sea surface temperature, and in situ temperature and salinity profiles, we reproduced the Kuroshio variation south of Japan for the period from 8 to 28 February 2010. EnKF successfully reproduced the Kuroshio path positions and the water mass property of the Kuroshio waters as observed. It also detected the variation of the steep thermohaline front in the Kii Channel due to the intrusion of the Kuroshio water based on the observation, suggesting efficiency of EnKF for detection of open and coastal seas interactions with highly complicated spatiotemporal variability.