The structural state of the former lower continental crust in Calabria (S. Italy)

In the Northern Serre (S. Italy), a continuous section through a former lower continental crust is exposed (Schenk 1984, 1985). These granulite facies rocks have not been penetratively deformed during their uplift to higher crustal levels. Therefore, they allow to study the structural state of the lower continental crust. Most rockforming minerals, among them ortho- and clinopyroxene and cordierite, show recrystallization structures. Quarz basal subgrain boundaries are developed in lower levels of the lower crust and disappear toward higher levels. In addition to dimensional orientations of the rockforming minerals, the preferred crystallographic orientations of plagioclases, cordierite, amphibole, pyroxenes and, rarely, quartz reflect the strain orientation of the prograde high-T deformation. During this deformation, the stretching direction was constant NNE-SSW throughout the exposed lower crustal section. Shear indicators are rare. This points to the fact that deformation has been homogeneous and coaxial flattening. There is only a small variation in orientation and strength of textures throughout the exposed lower crust. Therefore, neighbouring layers of different composition rather than different deformation might serve as seismic reflectors in the former lower crust.

---

Zusammenfassung In der nördlichen Serre (Süditalien) ist ein zusammenhängender Bereich einer ehemaligen kontinentalen Unterkruste aufgeschlossen (Schenk 1984, 1985). Diese granulitfaziellen Gesteine sind bei ihrem Aufstieg in höhere Krustenbereiche nicht durchgreifend überprägt worden. Deshalb läßt sich an ihnen noch der strukturelle Zustand der ehemaligen Unterkruste studieren. Außer in Feldspäten, Quarz und Amphibol tritt auch in Ortho- und Klinopyroxen und in Cordierit Rekristallisation auf. In tieferen Krustenniveaus sind im Quarz basisparallele Subkorngrenzen entwickelt, die in höheren Krustenbereichen nicht auftreten. Sowohl die Gestaltregelungen der gesteinsbildenden Minerale als auch die kristallographischen Plagioklas-, Cordierit-, Amphibol-, Pyroxen- und (seltener) Quarzregelungen spiegeln die Strain-orientierung der prograden hochtemperierten Deformation wider. Während dieser Deformation blieb die Streckung im gesamten Unterkrustenbereich konstant NNE-SSW orientiert. Scherindikatoren sind selten. Beides deutet darauf hin, daß die Deformation homogen und als koachsiale Plättung abgelaufen ist. Im gesamten aufgeschlossenen Unterkrustenbereich variieren weder Intensität noch Orientierung der kristallographischen und gestaltlichen Regelungen der gesteinsbildenden Minerale wesentlich. Deshalb sollten in der ehemaligen Unterkruste Lagen unterschiedlicher Deformation weniger als seismische Reflektoren in Frage kommen als Lagen unterschiedlicher Zusammensetzung.

---

Résumé Le Massif de la Serre Septentrionale en Calabre (Sud de l'Italie) représente un tronçon d'une ancienne croûte continentale profonde (Schenk 1984, 1985). Les roches du faciès granulite qui le constituent n'ont pas subi de déformation penetrative lors de leur ascension dans les niveaux plus superficiels de la croûte. Leur étude permet donc de reconstruire les caractéristiques structurales de l'ancienne croûte profonde. Non seulement les feldspaths, le quartz et l'amphibole, mais encore l'orthopyroxène, le clinopyroxène et la cordiérite ont recristallisé. Dans les niveaux les plus profonds de la croûte on observe dans les cristaux de quartz des bordures de sous-grains parallèles à la base. Celles-ci n'apparaissent plus dans les niveaux plus superficiels. L'orientation des cristaux des minéraux constitutifs des roches, de même que l'orientation des réseaux cristallins du plagioclase, de la cordiérite, de l'amphibole, du pyroxène et (mais plus rarement) du quartz réflètent la direction de contrainte de la phase de déformation prograde de haute température. Pendant cette phase de déformation, la direction d'extension est demeurée NNE-SSW. Les témoins de cisaillement sont rares, ce qui montre que la déformation s'est effectuée de façon homogène, en relation avec un aplatissement coaxial. Les textures varient très peu en orientation comme en intensité dans toute la coupe de croûte profonde exposée. En conséquence, l'existence de réflecteurs sismiques devrait refléter des différences dans les compositions minéralogiques des roches plutôt que dans leurs caractéristiques structurales.

---

Serre (Schenk, 1984, 1985). . . , , . , , . , , , , () . NNE-SSW. . , . , , . , , .

     

Reconstruction of atmospheric CO2 from ice-core data and the deep-sea record of ontong Java plateau: the Milankovitch chron

We provide a reconstruction of atmospheric CO₂ from deep-sea sediments, for the past 625000 years (Milankovitch chron). Our database consists of a Milankovitch template of sea-level variation in combination with a unique data set for the deep-sea record for Ontong Java plateau in the western equatorial Pacific. We redate the Vostok ice-core data of Barnola et al. (1987). To make the reconstructions we employ multiple regression between deep-sea data, on one hand, and ice-core CO₂ data in Antarctica, on the other. The patterns of correlation suggest that the main factors controlling atmospheric CO₂ can be described as a combination of sea-level state and sea-level change. For best results squared values of state and change are used. The square-of-sea-level rule agrees with the concept that shelf processes are important modulators of atmospheric CO₂ (e.g., budgets of shelf organic carbon and shelf carbonate, nitrate reduction). The square-of-change rule implies that, on short timescales, any major disturbance of the system results in a temporary rise in atmospheric CO₂.     

ISA-Hypoplasticity accounting for cyclic mobility effects for liquefaction analysis

Acta Geotechnica - The hypoplastic model for sands proposed by Wolffersdorff (Mech Cohes Frict Mater 1: 251–271, 1996) combined with the intergranular strain anisotropy by Fuentes and...     

Water level observations from unmanned aerial vehicles for improving estimates of surface water–groundwater interaction

Integrated hydrological models are usually calibrated against observations of river discharge and piezometric head in groundwater aquifers. Calibration of such models against spatially distributed observations of river water level can potentially improve their reliability and predictive skill. However, traditional river gauging stations are normally spaced too far apart to capture spatial patterns in the water surface, whereas spaceborne observations have limited spatial and temporal resolution. Unmanned aerial vehicles can retrieve river water level measurements, providing (a) high spatial resolution; (b) spatially continuous profiles along or across the water body, and (c) flexible timing of sampling. A semisynthetic study was conducted to analyse the value of the new unmanned aerial vehicle‐borne datatype for improving hydrological models, in particular estimates of groundwater–surface water (GW–SW) interaction. Mølleåen River (Denmark) and its catchment were simulated using an integrated hydrological model (MIKE 11–MIKE SHE). Calibration against distributed surface water levels using the Differential Evolution Adaptive Metropolis algorithm demonstrated a significant improvement in estimating spatial patterns and time series of GW–SW interaction. After water level calibration, the sharpness of the estimates of GW–SW time series improves by ~50% and root mean square error decreases by ~75% compared with those of a model calibrated against discharge only.     

On A☆ search with stopover areas

Today's map navigation software offers more and more functionality. For example, it cannot only route from a start to a destination address, but the user can also specify a number of via destinations that are to be visited along the route. What is not commonly found in the software is the handling of so-called stopover areas. Here the user specifies a sequence of geographic areas and wants the route to lead into or through each of these areas (but he does not actually care where exactly). A modification of the well-known A^☆ algorithm that considers convex stopover areas is presented. Algorithmic variants and implementation issues are discussed. Example results on a real-world data set are presented for the case of axis parallel rectangular stopover areas.     

Global carbon budgets and the viability of new fossil fuel projects

Policy-makers of some fossil fuel-endowed countries wish to know if a given fossil fuel supply project is consistent with the global carbon budget that would prevent a 2 °C temperature rise. But while some studies have identified fossil fuel reserves that are inconsistent with the 2 °C carbon budget, they have not shown the effect on fossil fuel production costs and market prices. Focusing on oil, we develop an oil pricing and climate test model to which we apply future carbon prices and oil consumption from several global energy-economy-emissions models that simulate the energy supply and demand effects of the 2 °C carbon budget. Our oil price model includes key oil market attributes, notably upper and lower market share boundaries for different oil producer categories, such as OPEC. Using the distribution of the global model results as an indicator of uncertainty about future carbon prices and oil demand, we estimate the probability that a new investment of a given oil source category would be economically viable under the 2 °C carbon budget. In our case study of Canada’s oil sands, we find a less than 5% probability that oil sands investments, and therefore new oil pipelines, would be economically viable over the next three decades under the 2 °C carbon budget. Our sensitivity analysis finds that if OPEC agreed to reduce its market share to 30% by 2045, a significant reduction from its steady 40–45% of the past 25 years, then the probability of viable oil sands expansion rises to 30%.     

Origin of ore fluids in the Muruntau gold system: Constraints from noble gas, carbon isotope and halogen data

Hydrothermal vein minerals directly associated with native gold mineralization in the Muruntau vein system (Uzbekistan) have been studied for noble gas, carbon isotope and halogen chemistry of the trapped ore-related fluids. Helium trapped in early arsenopyrite 1, which has preserved the original fluid signature better than associated scheelite and quartz, indicates a small input from a mantle source (?5% of total He). However, the overwhelming majority of the He in the fluid (∼95%) is from crustal sources. The noble gases Ne, Kr and Xe in the sample fluids are dominated by gases of atmospheric origin. The carbon isotope (δ¹³C: −2.1‰ to −5.3‰) and halogen characteristics of the fluids (log Br/Cl: −2.64 to −3.23) lend further support for the activity of juvenile fluids during the main ore stage. The high proportion of crustal components in the ore-forming fluids may be explained by intense fluid-rock interaction and is also supported by previous Nd and Sr isotope studies. The involvement of a juvenile fluid component during the main stage of hydrothermal activity at Muruntau (∼275 Ma) can be linked to the emplacement of lamprophyric dikes at Muruntau, due to apparently overlapping ages for high-temperature alteration, related ore vein formation and intrusion of the dikes. The input of mantle-derived fluids, possibly related to the Hercynian collisional event in the western Tien Shan, stimulated intense fluid-rock interaction in the crust. In this context, the mantle-derived fluid should be considered as one possible carrier of metals. Significant amounts of external meteoric fluids circulating in fracture systems are interpreted to have modified the noble gas signature of fluid in quartz, mostly during late, low temperature fluid circulation.     

Biotite Reference Materials for Secondary Ion Mass Spectrometry 18O/16O Measurements

Five new biotite reference materials were calibrated at the SwissSIMS laboratory (University of Lausanne) for oxygen isotope determination by secondary ion mass spectrometry (SIMS) and are available to the scientific community. The oxygen isotope composition of the biotites, UNIL_B1 to B5, was determined by laser‐heating fluorination to be 11.4 ± 0.11‰, 8.6 ± 0.15‰, 6.1 ± 0.04‰, 7.1 ± 0.05‰ and 7.6 ± 0.04‰, respectively. SIMS analyses on spots smaller than 20 μm gave a measurement repeatability of 0.3‰ (2 standard deviation, 2s). The matrix effect due to solid solution in natural biotite could be expressed as a linear function of X_Mg and X_F for biotite. No effect was found for different crystallographic orientations. SIMS analysis allows the oxygen isotope composition of biotite to be measured with a measurement uncertainty of 0.3–0.4‰ (2s) for biotites with similar major element compositions. A measurement uncertainty of 0.5‰ (2s) is realistic when F poor biotites (lower than 0.2% m/m oxides) within the compositional range of X_Mg of 0.3–0.9 were compared from different sessions. The linear correlation with F content offers a reasonable working curve for F‐rich biotites, but additional reference materials are needed to confirm the model.     

Mineralogical and Geochemical Constraints on the Genesis of the Carbonate‐Hosted Jebel Ghozlane Pb–Zn Deposit (Nappe Zone,Northern Tunisia)

The Pb–Zn deposit at Jebel Ghozlane, in the Nappe zone (northern Tunisia), is hosted by Triassic dolostones and Eocene limestones and is located along faults and a thrust‐sheet boundary. The sulfide mineralization of the deposit consists mainly of galena and sphalerite and occurs as vein, stockwork, breccia, dissemination and replacement ores. Three hydrothermal stages are involved in the formation of the ores: stage I is dominated by celestite‐barite, hydrothermal dolomite DII, colloform sphalerite, and galena I; stage II consist of galena II; and stage III contains calcite. Galena in the deposit yielded average ²⁰⁶Pb/²⁰⁴Pb, ²⁰⁷Pb/²⁰⁴Pb and ²⁰⁸Pb/²⁰⁴Pb ratios of 18.705, 15.667 and 38.734, respectively, suggesting a single upper crustal source reservoir for metals. Trace element data indicate the presence of Zn‐ and As‐free galena and As‐rich galena (with 0.2–0.5% As). Sphalerite contains 0.4% As, 0.7–0.9% Cd and 0.1–1.5% Fe. Microthermometric analysis of fluid inclusions in celestite shows that the deposit formed from fluids composed of heterogeneous mixtures of saline (19.5 ± 1 wt% NaCl eq.) aqueous solutions sourced from basinal brines, and gaseous CO₂‐rich phases bearing low amounts of CH₄, N₂ and/or H₂S, at temperatures of 172 ± 5°C.