Water table fluctuation analyses and associated empirical approach to predict spatial distribution of water table at Yeşilköy/AgiosAndronikos aquifer

The groundwater of the deep Ye?ilköy aquifer is the only water resource for agricultural and domestic consumption at the Karpaz Peninsula of Cyprus, which stretches approximately 100 km from the northeast of capital Nicosia to the northern tip of Cyprus. During the last decade, over-pumping and following dry periods have depleted the groundwater resources and the water surface elevation of the aquifer has dropped. The aim of this study is to understand the behavior of the Ye?ilköy aquifer in the last decade for the proper management of groundwater resources. This has been achieved based on well survey and field survey studies, monitoring programs followed by pumping tests, and safe yield analysis. Most of the research effort has been focused on field and well survey studies to quantify agricultural water consumption and abstraction rates from the aquifer. A long-term groundwater level monitoring program, short-term continuous groundwater monitoring and pumping tests provided information for the regression analyses while deriving a sixth order polynomial relationship between the period parameter and the head parameter. The equation was helpful to predict the short-term behavior of the water level when the present hydrogeological conditions prevail. The pumping test results satisfied the hydraulic properties of calcarenite formation yielding T = 1,782 m²/day and S = 0.0012. The results of safe yield analysis show that the annual deficit of the aquifer is 0.496 million cubic meters (MCM), which is equivalent to a 0.6 m drop in groundwater levels per year. Finally, the resultant annual safe yield of the aquifer is estimated as 0.84 MCM.     

Determining the weights of two types of artificial reefs required to resist wave action in different water depths and bottom slopes

The interaction between waves and artificial reefs (ARs; a hollow cube weighing 8.24 kN (0.84 t) and a water pipe weighing 1.27 kN (0.13 t)) in shallow waters was investigated with respect to variations in design weight, orientation (for cube; 45° and 90° angles, for pipe; 0°, 90°, and 180° angles to flow), depth (1–20 m), and bottom slope (10^?1, 30^?1, and 50^?1). Physics equations and FLUENT software were used to estimate resisting and mobilising forces, and drag coefficients. Drag coefficients for the hollow cube were 0.76 and 0.85 at 45° and 90° angles to the current, respectively, and 0.97, 0.38, and 1.42 for the water pipe at 0°, 90°, and 180° angles to the current, respectively. Deepwater offshore wave conditions at six stations were transformed into shallow nearshore waters representative of the artificial reef site. Waters deeper than 12 and 16 m are safe to deploy blocks with angles of 45° and 90°, respectively. However, water pipes constructed at angles of 90° and 180° to the current were estimated as being unstable for 365 out of 720 cases at all stations (only one station was stable for all cases). Water pipes angled at 0° were found to be stable in all 360 cases. Slope had a significant effect on weight and depth. Results from this study provide an important reference for engineers performing projects aiming to increase the performance and service life of ARs.     

Remote sensing of water depths in shallow waters via artificial neural networks

Determination of the water depths in coastal zones is a common requirement for the majority of coastal engineering and coastal science applications. However, production of high quality bathymetric maps requires expensive field survey, high technology equipment and expert personnel. Remotely sensed images can be conveniently used to reduce the cost and labor needed for bathymetric measurements and to overcome the difficulties in spatial and temporal depth provision. An Artificial Neural Network (ANN) methodology is introduced in this study to derive bathymetric maps in shallow waters via remote sensing images and sample depth measurements. This methodology provides fast and practical solution for depth estimation in shallow waters, coupling temporal and spatial capabilities of remote sensing imagery with modeling flexibility of ANN. Its main advantage in practice is that it enables to directly use image reflectance values in depth estimations, without refining depth-caused scatterings from other environmental factors (e.g. bottom material and vegetation). Its function-free structure allows evaluating nonlinear relationships between multi-band images and in-situ depth measurements, therefore leads more reliable depth estimations than classical regressive approaches. The west coast of the Foca, Izmir/Turkey was used as a test bed. Aster first three band images and Quickbird pan-sharpened images were used to derive ANN based bathymetric maps of this study area. In-situ depth measurements were supplied from the General Command of Mapping, Turkey (HGK). Two models were set, one for Aster and one for Quickbird image inputs. Bathymetric maps relying solely on in-situ depth measurements were used to evaluate resultant derived bathymetric maps. The efficiency of the methodology was discussed at the end of the paper. It is concluded that the proposed methodology could decrease spatial and repetitive depth measurement requirements in bathymetric mapping especially for preliminary engineering application.     

A parametric study on seakeeping assessment of fast ships in conceptual design stage

The paper presents an approach to investigate the effects of some parameters on seakeeping assessment of fast ships in conceptual design stage. Hull form parameters have been classified into two groups: main dimensions (L, B and T) and secondary form parameters (LCB and C_P). To demonstrate the approach a fast ship is redesigned as parent hull and alternative hull forms are generated by changing these parameters systematically. Some hull forms are selected related the geometric limits and seakeeping analyzes are here investigated and discussed. The obtained results are satisfactory for seakeeping predictions during the conceptual design stage.     

Designing a flood forecasting and inundation-mapping system integrated with spatial data infrastructures for Turkey

Turkey currently lacks a fully functional flood forecasting system (FFS). However, the studies necessary for establishing such a system are still being performed by the Turkish State Meteorological Service. The main purpose of this study was to determine the technical architecture of the FFS intended to be developed in Turkey and to design a flood forecasting and inundation-mapping system integrated with spatial data infrastructure (SDI). Because SDIs provide interoperability among the institutions by enabling collective use of data and services, this enables decision makers to take correct and rapid decisions regarding the forecasting. In the design of the system, the Web services architecture presented by the open geospatial consortium that develops international standards for SDI realizations was taken as a basis. Designed with flexibility and an expandable architecture, the system will enable instant access to up-to-date data from different institutions through Web services and meets the requirements of a real-time FFS. While the criteria requiring the expansion of the designed system were explained, its implementation was left for future studies.     

The Influence of Testing Procedures on Uniaxial Compressive Strength Prediction of Carbonate Rocks from Equotip Hardness Tester (EHT) and Proposal of a New Testing Methodology: Hybrid Dynamic Hardness (HDH)

The Equotip hardness tester (EHT) is a portable and non-destructive instrument used mainly for the dynamic rebound hardness testing of metals. Although various versions of the ‘single impacts’ and ‘repeated impacts’ testing procedures have been employed by different authors for different applications, it is not yet known whether a particular testing procedure is more relevant for a specific application in rock engineering. To be able to contribute to the subject, the present study was carried out to determine the suitability of different rebound testing procedures with this instrument for uniaxial compressive strength (UCS) estimations of some selected carbonate rocks. To achieve this goal, as well as four different existing rebound testing procedures, a newly proposed testing methodology involving the parameter hybrid dynamic hardness (HDH) was also employed. The statistical analyses performed on the experimental data, on the whole, showed that the test procedures which are based on single impacts test procedures outperformed the repeated impacts test procedures in terms of UCS prediction accuracy. The prediction capability of the newly introduced testing methodology was found to be superior to those of other procedures considered in this work, suggesting that it could be an efficient tool in practice for preliminary estimates of rock strength. The statistical analyses also indicated that, in practical applications of the EHT using different test procedures, it may be possible to predict the UCS more accurately when apparent density data is available. For the range of specimen sizes considered, no clear evidence of size effect was observed in the mean rebound values. The argument raised by some other authors that the EHT might not be a convenient instrument for the dynamic rebound hardness determination of relatively high-porosity rocks was not confirmed in this study.     

Examination of the structural characteristics arising in gypsums by the GPR and MASW methods (Sivas,Turkey)

This study was performed at an area of 50?×?48 m² being defined as a new settlement in the northeast of Sivas. In the study, the discontinuities that are not deep and their geophysical characteristics were examined by the GPR and MASW methods. For interpretation, GPR cross sections were prepared as 2D–3D, and MASW cross sections were prepared as 2D. As for geophysical cross sections, about 10 m depth was examined. It was understood that the reflections observed in the form of hyperbolas in GPR cross sections correspond to areas having low S wave velocity (V_s) in MASW cross sections. It was understood that the S wave velocities are lower than 653 m/s, that the seismic velocities in between 653 and 275 m/s indicate partially deteriorated areas and that the S wave velocities of unweathered gypsums are higher than 1275 m/s at these low-velocity zones. Thus, it was thought that the fill material that may arise in the fracture, crack and deterioration areas arises from intercalation and clastic gypsum units, and that it plays a role in having low value S wave velocities. In all the geophysical cross sections, it was understood that the structures with gypsum are intense at the initial 5 m. And a fracture at the south of the study area, that it was estimated might be longer than 40 m, was determined as the largest gypsum structure. It was understood that this fracture starts from a depth of about 5 m in the west and that it slopes down to 7 m depth in the east. According to these results, it was understood that the damage amount arising in time in the gypsum structures from the effect of water may increase, the study area was defined as risky, and the required importance should be attached to these structures especially in foundation engineering.     

The ancient water system at the Upper city of Hasankeyf,Turkey

In this paper, the water distribution system at the Upper city of a well-preserved medieval town of Hasankeyf near the Tigris is questioned and its relation to the urban settlement pattern is assessed. The discussions are based on the cistern-intensive and available canal data collected within the residential borders of the Upper city in 2005. Being the third level features of the water system, the cisterns the majority of which are now attributable to the “conical, small and individual” typology, have shown that they were actively operated through the open rock-cut canals which were fed by the backbone of the distribution network—namely the siphon system, until recent times. Although a considerable number of converted cisterns hallmark shifts in the function of the water system and the changing conjectures over time, the blue prints of such a big “hydro-design” reveal the competence of semi-arid occupational environments in Upper Mesopotamia in showing how to cope with the topographical constraints and climatic disadvantages and turn these into an opportunity through the efficient use of terrain along with a carefully designed settlement area. That the Upper city now offers numerous water features makes this piece of land quite a representative of the regional works and shows the apex of the perception of ancient technology achieved with the siphon that could have been launched in the Roman era, and the state of art of planning ancient natural and man-made habitats.