Complex coastal change in response to autogenic basin infilling: An example from a sub‐tropical Holocene strandplain

Thick bay‐fill sequences that often culminate in strandplain development serve as important sedimentary archives of land–ocean interaction, although distinguishing between internal and external forcings is an ongoing challenge. This study employs sediment cores, ground‐penetrating radar surveys, radiocarbon dates, palaeogeographic reconstructions and hydrodynamic modelling to explore the role of autogenic processes – notably a reduction in wave energy in response to coastal embayment infilling – in coastal evolution and shoreline morphodynamics. Following a regional 2 to 4 m highstand at ca 5·8 ka, the 75 km² Tijucas Strandplain in southern Brazil built from fluvial sediments deposited into a semi‐enclosed bay. Holocene regressive deposits are underlain by fluvial sands and a Pleistocene transgressive–regressive sequence, and backed by a highstand barrier‐island. The strandplain is immediately underlain by 5 to 16 m of seaward‐thickening, fluvially derived, Holocene‐age, basin‐fill mud. Several trends are observed from the landward (oldest) to the seaward (youngest) sections of the strandplain: (i) the upper shoreface and foreshore become finer and thinner and shift from sand‐dominated to mud‐dominated; (ii) beachface slopes decrease from >11° to ca 7°; and (iii) progradation rates increase from 0·4 to 1·8 m yr^?1. Hydrodynamic modelling demonstrates a correlation between progressive shoaling of Tijucas Bay driven by sea‐level fall and sediment infilling and a decrease in onshore wave‐energy transport from 18 to 4 kW m^?1. The combination of allogenic (sediment supply, falling relative sea‐level and geology) and autogenic (decrease in wave energy due to bay shoaling) processes drove the development of a regressive system with characteristics that are rare, if not unique, in the Holocene and rock records. These findings demonstrate the complexities in architecture styles of highstand and regressive systems tracts. Furthermore, this article highlights the diverse internal and external processes and feedbacks responsible for the development of these intricate marginal marine sedimentary systems.     

Low temperature magnetism and Mössbauer spectroscopy study from natural goethite

In this work a magnetic characterization was made of natural goethite from Burkina Faso, Africa, by using low temperature magnetization curves, hysteresis loops, Mössbauer spectroscopy at room temperature and 4.2 K, and AC susceptibility from 10 to 400 K. The samples are from two distinct geological sites that underwent different weathering processes. All measurements point to the occurrence of typical high coercivity goethite. Through Mössbauer spectroscopy sample BL44, from Gangaol, northeast Burkina Faso showed relaxation effects due to a wide distribution of grain size, including superparamagnetism threshold. AC susceptibility also supports this interpretation. The sample BL50 from Bonga in Burkina Faso is associated with lateritic Ni and in addition to goethite this sample also contained magnetite, as determined by Verwey transition in low temperature measurements as well as a small content of hematite identified by Mössbauer spectroscopy.     

Iron partitioning and hydrogen generation during serpentinization of abyssal peridotites from 15°N on the Mid-Atlantic Ridge

Aqueous dihydrogen (H₂,aq) is produced in copious amounts when seawater interacts with peridotite and H₂O oxidizes ferrous iron in olivine to ferric iron in secondary magnetite and serpentine. Poorly understood in this process is the partitioning of iron and its oxidation state in serpentine, although both impose an important control on dihydrogen production. We present results of detailed petrographic, mineral chemical, magnetic and Mößbauer analyses of partially to fully serpentinized peridotites from the Ocean Drilling Program (ODP) Leg 209, Mid-Atlantic Ridge (MAR) 15°N area. These results are used to constrain the fate of iron during serpentinization and are compared with phase equilibria considerations and peridotite-seawater reaction path models. In samples from Hole 1274A, mesh-rims reveal a distinct in-to-out zoning from brucite at the interface with primary olivine, followed by a zone of serpentine + brucite ± magnetite and finally serpentine + magnetite in the outermost mesh-rim. The compositions of coexisting serpentine (Mg# 95) and brucite (Mg# 80) vary little throughout the core. About 30-50% of the iron in serpentine/brucite mesh-rims is trivalent, irrespective of subbasement depth and protolith (harzburgite versus dunite). Model calculations suggest that both partitioning and oxidation state of iron are very sensitive to temperature and water-to-rock ratio during serpentinization. At temperatures above 330 °C the dissolution of olivine and coeval formation of serpentine, magnetite and dihydrogen depends on the availability of an external silica source. At these temperatures the extent of olivine serpentinization is insufficient to produce much hydrogen, hence conditions are not reducing enough to form awaruite. At T < 330 °C, hydrogen generation is facilitated by the formation of brucite, as dissolution of olivine to form serpentine, magnetite and brucite requires no addition of silica. The model calculations suggest that the iron distribution observed in serpentine and brucite is consistent with formation temperatures ranging from <150 to 250 °C and bulk water-to-rock ratios between 0.1 and 5. These conditions coincide with peak hydrogen fugacities during serpentinization and are conducive to awaruite formation during main stage serpentinization. The development of the common brucite rims around olivine is either due to an arrested reaction olivine → brucite → serpentine + brucite, or reflects metastable olivine-brucite equilibria developing in the strong gradient in silica activity between orthopyroxene (talc-serpentine) and olivine (serpentine-brucite).     

Community structure and functional traits of mollusks associated with coastal reef macroalgae in Northeastern Brazil

This study investigated the community structure and functional traits of the mollusk fauna associated with macroalgae with different thallus morphologies in a reef environment in Northeastern Brazil. A total of 15 individuals of each species of macroalgae adhered to natural substrate and 15 individuals of Padina gymnospora detached from the substrate were collected. The structural complexity of algal habitats was measured and the associated malacofauna screened and identified. All three macroalgae differed significantly in the complexity of their habitat, with Sargassum polyceratium being the most complex. A total of 823 specimens of mollusks belonging to 22 species and 11 families were recorded, of which Columbellidae was the most represented with six species. The functional trait “size” revealed that micromollusks smaller than 10 millimeters were predominant in the community; however, individuals of larger sizes (up to 24.54 millimeters) belonging to young stages of other species were also present. Eight functional trophic groups were identified, of which “carnivorous” stood out with seven species. Six functional groups of microhabitats were identified, with intra‐specific variation in habitats, while habitat expansion was documented for species not yet recorded in association with macroalgae. The structure of the molluskan community differed among the three algae species with the greatest richness, abundance, and diversity of mollusks and functional traits occurring with S. polyceratium. Community structure differed between algae adhered to natural substrate and detached algae, with the latter having lower mollusk richness and diversity, but with greater abundance of some species that remained on algal fronds after release from the reef environment. This study reinforces the importance of algal habitat for marine invertebrate fauna, especially for micromollusks that spend their entire life cycle, or part of it, in association with macroalgae.     

Environmental monitoring of magnetic iron phases of urban water reservoir lake sediments (Taiaçupeba Lake,metropolitan region of São Paulo,Brazil) by using Mössbauer spectroscopy

In the present work, we investigate the iron oxides and oxyhydroxides behavior and evolution, related to the geochemical behavior of some metals, which could be retained as solid phases in the sediments from an urban water reservoir lake, placed in Taiaçupeba, Great São Paulo, Brazil. These tasks were performed by the establishment of a proceduring setting for environmental monitoring analysis through Mössbauer spectroscopy measurements associated to hysteresis loops measurements and chemical analysis [X-ray fluorescence (XRF)]. We inferred the possibility of goethite occurrence in broad particle size distribution (5–50 nm), and related to ferrihydrite, and small grain-size hematite (about 8 nm). The magnetometry results pointed to the paramagnetic/superparamagnetic behavior of the magnetic phases present in the samples and also suggested the occurrence of small grain-size magnetite. We also verified the presence of clay minerals related to Fe, as well as the occurrence of Fe³⁺ and/or Fe²⁺ in short-range structural order. Through a straight correlation among Mössbauer spectra data gained at T = 77 K and Al-metal, metal-Fe molar ratios, provided through XRF data, we found remarkable indications of interference on meta-stable phases evolution to its final products. Such results can be pointing for evidences about the possible isomorphic replacing and/or adsorption of Al and other metals in goethite and hematite.     

Delineating managed land for reporting national greenhouse gas emissions and removals to the United Nations framework convention on climate change

Land use and management activities have a substantial impact on carbon stocks and associated greenhouse gas emissions and removals. However, it is challenging to discriminate between anthropogenic and non-anthropogenic sources and sinks from land. To address this problem, the Intergovernmental Panel on Climate Change developed a managed land proxy to determine which lands are contributing anthropogenic greenhouse gas emissions and removals. Governments report all emissions and removals from managed land to the United Nations Framework Convention on Climate Change based on this proxy, and policy interventions to reduce emissions from land use are expected to focus on managed lands. Our objective was to review the use of the managed land proxy, and summarize the criteria that governments have applied to classify land as managed and unmanaged. We found that the large majority of governments are not reporting on their application of the managed land proxy. Among the governments that do provide information, most have assigned all area in specific land uses as managed, while designating all remaining lands as unmanaged. This designation as managed land is intuitive for croplands and settlements, which would not exist without management interventions, but a portion of forest land, grassland, and wetlands may not be managed in a country. Consequently, Brazil, Canada and the United States have taken the concept further and delineated managed and unmanaged forest land, grassland and wetlands, using additional criteria such as functional use of the land and accessibility of the land to anthropogenic activity. The managed land proxy is imperfect because reported emissions from any area can include non-anthropogenic sources, such as natural disturbances. However, the managed land proxy does make reporting of GHG emissions and removals from land use more tractable and comparable by excluding fluxes from areas that are not directly influenced by anthropogenic activity. Moreover, application of the managed land proxy can be improved by incorporating additional criteria that allow for further discrimination between managed and unmanaged land.