Response of a two-layer ocean with a baroclinic current to a moving storm,part II

A circular storm moves with a constant speedc along a geostrophic flow similar to a western boundary current in the upper layer of a two-layer ocean with the motionless lower layer. The linear inertia terms are retained. Effects of the current becomes more conspicuous for smallerc and insignificant forc above 10 m s^–1. The inertia effects are manifested in cellular patterns of the interface perturbations with cell lengths of(c–vf ^–1 in a wake of the storm with a radius of an order of 100 km, wherev is the current velocity. On the left hand edge where the flow has a strong shear, the interface displacements have large amplitudes which increase with a distance along the path in a wake of the storm. These disturbances propagate to the left of the edge within an angle of cot^–1 (c ²/gH₀–1), whereg is the reduced gravity andH ₀ is the depth of the interface at the edge of the current. Comparison with the observations during Typhoon Trix in 1971 south of Japan suggests that fluctuations of the daily mean sea level with several days' periods observed along the southern coast of Japan may be due to the stationary oscillations of the Kuroshio caused by the inertia undulations along its left edge or due to the propagating perturbations to the left.     

Upwelling plumes in sagami bay and adjacent water around the Izu Islands,Japan

Water plumes, 20 km long or less, identified by low temperature, high salinity and high nutrient concentrations, were observed on the eastern side of Izu Islands where the Kuroshio Current or its branch flowed eastward. The T-S diagrams and the vertical profiles of oceanographic variables indicated that the water plumes resulted from the upwelling of subsurface water. A newly formed plume, characterized by a sharp temperature front and high nutrient concentrations, contained less chlorophyll than did old plumes. It is suggested that the upwelling plumes are maintained for a period long enough to allow luxuriant growth of phytoplankton.     

Deep structure of the Nojima Fault, southwest Japan, estimated from borehole observations of fault-zone trapped waves

To estimate the deep structure of the southern part of the Nojima Fault, southwest Japan without the influence of near-surface structures, we analyzed the Love-wave-type fault-zone trapped waves (LTWs) recorded by a borehole seismometer at 1800 m depth. We examined the polarization, dispersion, and dominant frequency of the wavetrain following the direct S-wave in each seismogram to identify the LTW. We selected eight candidates for typical LTWs from 462 records. Because the duration of the LTW increases with hypocentral distance, we infer that the low velocity fault-zone of the Nojima Fault continues towards the seismogenic depth. In addition, since the duration of the LTW increases nonlinearly with hypocentral distance, we infer that the S-wave velocity of the fault-zone increases with depth. The location of events showing the LTW indicates that the fault-zone dips to the southeast at 75° and continues to a depth of approximately 10 km. We assumed a uniform low-velocity waveguide to estimate the average structure of the fault-zone. We estimated the average width, S-wave velocity, and Q_s of the fault-zone by comparing an analytical solution of the LTW with measured data. The average width, S-wave velocity, and Q_s of the fault-zone are 150 to 290 m, 2.5 to 3.2 km/s, and 40 to 90, respectively. Hence the fault-zone structure with a larger width and smaller velocity reduction than the fault-zone model estimated by previous surface observation is more suitable to represent the average fault-zone structure of the Nojima fault. The present study also indicated that the shallow layers and/or a shallow fault-zone structure drastically changes the characteristics of the LTW recorded at the surface, and therefore cause a discrepancy in the fault-zone model between the borehole observation and surface observation.     

Performance of Mortar and Chemical Grout Injection into Surrounding Soil When Slurry Pipe-jacking Method is Used

Small-diameter shallow tunnels are often being built by using the slurry pipe-jacking method. This system involves the pushing or thrusting of a drivage machine and concrete pipes into the ground. Chemical grout injection into the surrounding soil around the tunnel is carried out after the drivage and pushing processes are finished. The purpose of the chemical grout injection is to maintain permanent stability of the surrounding soil. However, the behavior of the chemical grouting material in the surrounding soil around the tunnel and the amount of optimum injection is not clearly understood. From these points of view, this paper discusses the performance of the chemical grouting material, when it is injected into the surrounding soil around the tunnel, by means of 2-D Eulerian–Lagrangian seepage analysis. Moreover, the effectiveness of the chemical grout injection was evaluated by using the non-linear finite element method. This investigation show when the range of the grouted zone is designed; it is necessary that the relationship between Young’s modulus of the soil/grouted zone and the confining stress be taken into consideration in order to establish effective, economical and safe chemical grout injection system. Understanding the performance of the seepage/dispersion behavior of the chemical grout and the characteristics of soil/ grouted zone is also important.     

Monitoring of Over Cutting Area and Lubrication Distribution in a Large Slurry Pipe Jacking Operation

Slurry pipe jacking was firmly established as a special method for the non-disruptive construction of the underground pipelines of sewage systems. Pipe jacking, in its traditional form, has occasionally been used for short railways, roads, rivers, and other projects. Basically the system involves the pushing or thrusting of concrete pipes into the ground by a number of jacks. In slurry pipe jacking, during the pushing process, mud slurry and lubricant are injected into the face and the over cutting area that is between the concrete pipes and the surrounding soil. Next, the slurry fills voids and the soil stabilizes due to the created slurry cake around the pipes. Fillings also reduce the jacking force or thrust during operation. When the drivage and pushing processes are finished, a mortar injection into the over cutting area is carried out in order to maintain permanent stability of the surrounding soil and the over cutting area. Successful lubrication around the pipes is extremely important in a large diameter slurry pipe jacking operation. Control of lubrication and gaps between pipes and soil can prevent hazards such as surface settlement and increases in thrust. Also, to find voids around the pipes after the jacking process, in order to inject mortar for permanent stabilizing, an investigation around the pipes is necessary. To meet these aims, this paper is concerned with the utilization of known methods such as the GPR (Ground Penetrating Radar) system and borehole camera to maintain control of the over cutting area and lubricant distribution around the pipes during a site investigation. From this point of view, experiments were carried out during a tunnel construction using one of the largest cases of slurry pipe jacking in Fujisawa city, Japan. The advantages and disadvantages of each system were clarified during the tests.     

Preparation of a New Geological Survey of Japan Geochemical Reference Material: Coral JCp-1

A new geochemical reference material, coral Porites sp. JCp-1 has been prepared by the Geological Survey of Japan (GSJ). Provisional values for twenty one major, minor and trace elements are presented. The homogeneity tests showed that all elements studied are considered to be homogeneously distributed.     

Application of a fluorescent technique to the study of the weathering process

Processes and rates of weathering in representative tuff obtained from a Green Tuff region were directly examined using a new fluorescent approach. This approach was developed to visualize microscopically the microcracks and micropores that contribute to deterioration. The following observations were made. Progression of tuff weathering is caused by a delicate balance between chemical alteration and physical disintegration. Weathering occurs in many hidden microcracks and micropores not detected under natural light, but which can be clearly visualized under ultraviolet light. Water pathways, such as microcracks and cavities, accelerated the chemical alteration by increasing the effective surface area of rocks in contact with water. As the reaction proceeds, the constituent materials loosen and alteration products become widespread in the matrix. Secondary amorphous to poorly crystallized materials, such as iron hydroxide and aluminosilicate, precipitate on the fracture surfaces, slowing the progress of weathering. At the ultimate stage of weathering in tuff, all cracks and most of the micropores are filled with secondary materials. These observations on a microscopic scale during tuff weathering agree with the assessment of weathering obtained by measuring porosity, P-wave velocity and tensile strength.     

Earthquake‐related geomorphic environment and pond sediment information

Shaking during the 1995 Kobe earthquake caused surface material to be more mobile in catchment areas in the Rokko Mountains, Kobe, where there are some active fault lines. As a result, there were many landslides associated with the earthquake. The sedimentation rate in a pond in the mountains increased several fold, then exponentially decreased with seasonality over several years. Six years after the earthquake there were no marked surface movements related to the earthquake, even though the sedimentation rates had increased slightly. A new steady state for the structure of the earthquake‐modi?ed surface had evidently been reached. Copyright © 2004 John Wiley & Sons, Ltd.