Compositional appraisal and quality implication of Emiworo metacarbonate deposit in Central Nigeria

Metacarbonate deposit occurring in Emiworo area, northcentral Nigeria are low grade marble associated with Proterozoic basement complex rocks. Integrated inorganic geochemical, physical and thermal characteristics of the samples were investigated with the aim of revealing their economic viability. The phase characteristics of the metacarbonate show that dolomite is the dominant phase with calcite and phlogopite as minor phases, while silicates, graphites and pyrites constitute the accessories. Reactivity of the quicklime measured after calcination at different temperatures revealed that only the quicklime produced in 1 hour at 950°C and 1000°C was found to be reactive. Physical properties and comparative data show that the Emiworo marble displays lower water absorption and higher compressive strength, loss on ignition and bulk specific gravity, compared to other metacarbonate rocks occurring in other parts of Nigeria and elsewhere. These attributes makes the deposit suitable for many conventional industrial applications.     

Evaluating freshwater lens morphology affected by seawater intrusion using chemistry-resistivity integrated technique: a case study of two different land covers in Carey Island, Malaysia

Freshwater lenses are vital to small island communities but are susceptible to seawater intrusion due to the physical changes in the shoreline land cover. The effect of seawater intrusion and irrigation water on a coastal unconfined aquifer beneath naturally preserved mangrove and deforested mangrove-barren belt was investigated in Carey Island. Analysis of the total dissolved solids (TDS) and earth resistivity (ER) using a geochemistry-electrical integrated technique gave a TDS–ER relationship capable of predicting freshwater lens morphology affected by sea-irrigation water. The study result shows freshwater was fourfold thicker in close proximity of the mangrove forest than the mangrove barren area; the further the shoreline from the mangrove thickest section, the less vulnerable was the seawater intrusion and the more fresh the irrigation water, and hence the greater the freshwater availability potential.     

Mapping of regional potential groundwater springs using Logistic Regression statistical method

Increasing demand for fresh water extraction in the semi-arid regions necessitates the exploration of groundwater spring potential areas notwithstanding the importance of both conservation and management aspects for planning development. Potential map of groundwater springs reduces the costs of horizontal well drilling that provides useful tool for engineers to locate probable region for groundwater existence. The objective of this study is to establish a model of the potential map of groundwater spring occurrences. A statistical and probabilistic Logistic Regression (LR) model was developed in association with the specified spring location and effective occurrence factors. The most statistically significant effective factors on spring occurrences were selected to zone groundwater spring potential areas. The proposed model was evaluated statistically. Results showed a satisfactory prediction for the proposed model. The outcome of this study facilitates the low-cost utilization of groundwater resources when policy makers need strategic development planning.     

Sediment Hosted Primary Tin Deposit Associated with Biotite Granite and Fault Zone at Gunung Paku, Klian Intan, Upper Perak, Malaysia

Gunung Paku near Klian Intan, Perak, is a primary tin deposit in Malaysia mined since 200 years ago, contributing 3–5% of tin ore concentrates previously, and recently over 70% of the Malaysian tin. Gunung Paku is located within the western Tin belt of Peninsular Malaysia associated with biotite granite (184–230 Ma) of the Main Range Granitoid which extends up to the southern part of Peninsular and Central Thailand. The primary tin mineralization style at the Gunung Paku is mainly associated with widespread occurrence of sheet-like quartz veining systems parallel to the strike of the host rocks and confined within a narrow N–S trending fault zone. The mineralization formed within a thick sequence of metasedimentry rock that belongs to the Baling Formation of Palaeozoic age. The host rock of weakly metamorphosed argillite generally experienced strong tropical weathering that resulted in a thick sequence of light grey to light brown oxidized profile. The mineralized veins range from simple quartz-cassiterite, quartz-tourmaline-cassiterite to complex quartz-cassiterite-polymetallic sulfide veins. Wall rock alterations at Gunung Paku are mainly characterized by the hypogene type alteration consisting of silicification, tourmalinization, chloritization, sericitization and kaolinization normally adjacent to mineralized quartz veins and brecciated-fault gouge zones. Pyrite, arsenopyrite, cassiterite, rutile, chalcopyrite, trippkeite (CuAsO4), scorodite, covellite and other secondary iron-oxyhydroxide are the common metallic minerals that accompanied the tin mineralization. Other minor occurrences include trace amounts of complex lead-bismuth-antimony-molybdenum bearing minerals.     

Seismic microzonation for Penang using geospatial contour mapping

Shear wave velocity (V _s) and the fundamental site period of the subsurface condition are the primary parameters that affect seismic soil amplification in particular sites. Within the topmost layer of the soil, which measures 30 m, the average shear wave velocity V _s30 is commonly used to build codes for site classification for the design of earthquake-resistant structures and to conduct microzonation studies. In this study, the development of a microzonation map for V _s30 distribution, National Earthquake Hazard Reduction Program V _s30 site classification, and a fundamental site period for Penang are presented. The multichannel analysis of surface wave (MASW) test was conducted for more than 50 sites with available borehole data to develop the microzonation maps. The ten selected V _s profiles measured by MASW show a good correlation with the data obtained using empirical correlations in a previous study. The highest V _s values were identified at the northeastern and southeastern parts of Penang Island, corresponding to the shallow bedrock and the outcrop zone. Conversely, the lowest V _s values were found in the northwestern and southwestern parts of the Penang mainland owing to the thick layer of soft clay and silt deposits. The site period map shows the variation in site periods, with the highest value of 1.03 s at the western part of the Penang mainland and the lowest value of 0.02 s at the eastern part of the Penang Island. The microzonation maps developed in this study are vital to studies on seismic hazard and earthquake mitigation programs in Malaysia.     

Food security and environmental degradation: evidence from developing countries

GeoJournal - In recent times, food security has received growing attention as a means to alleviate hunger, and to ensure sustainable supply of nutritious, secure and accessible food to the...     

Investigating the application of pixel-level and product-level image fusion approaches for monitoring surface water changes

The aim of this paper was to investigate the suitability of the pixel-level and product-level image fusion approaches to detect surface water changes. In doing so, firstly, the principal component analysis technique was applied to Landsat TM 2010 multispectral image to generate the PC components. Several pixel-level image fusion techniques were then performed to merge the Landsat ETM+ 2000 panchromatic with the PC1PC2PC3 band combination of Landsat TM 2010 imagery to highlight the surface water changes between the two images. The suitability of the resulting fused images for surface water change detection was evaluated quantitatively and visually. Finally, the support vector machine (SVM) technique was applied to the qualified fused images to map the highlighted changes. Furthermore, a product level fusion (PLF) approach based on various satellite-derived indices was employed to detect the surface water changes between ETM+ 2000 and TM 2010 images. The accuracy of the resulting change maps was assessed based on a reference change map produced using visual interpretation. The results demonstrated the effectiveness of the proposed approaches for surface water change detection, especially using the Gram Schmidt-SVM, PLF-NDWI, and PLF-NDVI methods which improved the accuracy of change detection over 99.70 %.     

Assessment of seawater intrusion to the agricultural sustainability at the coastal area of Carey Island, Selangor, Malaysia

Groundwater suitability for agriculture in an island with limited recharge area may easily be influenced by seawater intrusion. The aim of this study was to investigate seawater intrusion to the suitability of the groundwater for oil palm cultivation at the ex-promontory land of Carey Island in Malaysia. This is the first study that used the integrated method of geo-electrical resistivity and hydro-geochemical methods to investigate seawater intrusion to the suitability of groundwater for oil palm cultivation at two different land cover condition. The relationship between earth resistivity, total dissolved solids and earth conductivity was derived with crop suitability classification according to salinity, used to identify water types and also oil palm tolerance to salinity. Results from the contour conductivity maps show that area facing severe coastal erosion and area still intact with mangrove forest exhibits unsuitable groundwater condition for oil palm at the unconfined aquifer thickness of 15 and 31 m, respectively. Based on local sea-level rise prediction and Ghyben–Herzberg assumption (sharp interface), the condition in the study area, especially in severe erosion area, by the twenty-first century will no longer be suitable for oil palm plantation. The application of geo-electrical method combined with geochemical data, aided with the information on environmental history and oil palm physiography, has demonstrated that the integration of techniques is an effective tool in defining the status of agricultural suitability affected by salinity at the coastal aquifer area.     

Gold-Related Sulfide Mineralization and Ore Genesis of the Penjom Gold Deposit, Pahang, Malaysia

The Penjom gold deposit lies on the eastern side of the Raub‐Bentong Suture line within the Central Belt of Permo‐Triassic rocks, near Kuala Lipis, Pahang, Malaysia. The geology of the deposit is dominated by a sequence of fine‐ to coarse‐grained rhyolitic to rhyodacitic tuff, tuff‐breccia and a minor rhyolitic–rhyodacitic volcanic series, associated with argillaceous marine sedimentary rocks consisting of shale with subordinate shalely limestone of Padang Tungku Formation and Pahang Volcanic Series. Fine‐ to coarse‐grained tonalite and quartz porphyry intruded this unit. The main structural features of the area are north–south‐trending left‐lateral strike‐slip faults and their subsidiaries, which generally strike north–south and dip moderately to the east (350°–360°/40°–60°). Mineralization at the Penjom gold deposit is structurally controlled and also erratic laterally and vertically. The gold mineralization can be categorized as (i) gold associated with carbonate‐rich zones hosted within dilated quartz veins carrying significant amount of sulfides; (ii) gold disseminated within stockwork of quartz–carbonate veins affiliated with tonalite; and (iii) gold often associated with arsenopyrite and pyrite in quartz–carbonate veins and stringers hosted within shear zones of brittle–ductile nature in all rock types and in brittle fractured rhyodacitic volcanic rocks. Sphalerite, chalcopyrite, tetrahedrite and pyrrhotite are the minerals accompanying the early stage of gold mineralization. These minerals also suffered from local brittle deformation. However, most of the gold mineralization took place after the deposition of these sulfides. Galena appears somewhat towards the end of gold mineralization, whereas tellurium and bismuth accompanied gold contemporaneously. The gold mineralization occurred most probably due to the metamorphogenic deformational origin concentrated mostly in the shear zone. The mineralization is strongly controlled by the wall rock (e.g. graphitic shale), the sulfide minerals and fluid–rock interaction.