Chemical characteristics of groundwater in parts of mountainous region, Alvand, Hamadan, Iran

Eighty-seven groundwater samples have been collected from a mountainous region (Alvand, Iran) for hydrochemical investigations to understand the sources of dissolved ions and assess the chemical quality of the groundwater. Most water quality parameters are within World Health Organization acceptable limits set for drinking water. The least mineralized water is found closest to the main recharge zones and the salinity of water increased towards the north of the basin. The most prevalent water type is Ca–HCO₃ followed by water types Ca–NO₃, Ca–Cl, Ca–SO₄ and Mg–HCO₃. The Ca–NO₃ water type is associated with high nitrate pollution. Agricultural and industrial activities were associated with elevated level of NO₃⁻. Mineral dissolution/weathering of evaporites dominates the major element hydrochemistry of the area. Chemical properties of groundwater in Alvand region are controlled both by natural geochemical processes and anthropogenic activities.     

Rock slope stability evaluation using kinematic and kinetic methods along the Kamyaran-Marivan road,west of Iran

Interest in rock slope stability in mountainous regions has increased greatly in recent years.This issue has become a topic of major interest for geoscientists and engineering professionals,as well as for private citizens and local administrators,in many parts of the world.This paper evaluates the stability of seven rock slopes along the KamyaranMarivan tourist road,Kurdistan province,Iran,using various methods.The two main reasons for performing this research were to determine whether different methods of stability analysis provide the same results,and to determine how different factors such as the presence of water,tension cracks,and seismic forces affect the stability of these rock slopes.Firstly,field investigations were performed to obtain the engineering characteristics of the rock masses,discontinuities,and intact rocks of the slopes.Secondly,laboratory tests were carried out on rock samples obtained from the slopes,to determine the engineering properties of the intact rocks.Then for each rock slope,the contour diagram of discontinuities and slope face was drawn in the Dips v.5.1 software environment,and the failure mechanism was determined based on the kinematic or stereographic method.Next,the factors of safety of the rock slopes were calculated using the limit equilibrium method,based on the failure mechanisms resulting from the kinematic method.The accuracy of the results obtained by these two methods was investigated using SWedge v.4.0 software.The results indicated that four rock slopes have a potential for plane,wedge,and toppling failure,and three others are stable.Also,it was found that the stability of the studied rock slopes decreases greatly in the presence of water,tension cracks,and seismic forces.     

Investigation of rangeland indicator species using parametric and non-parametric methods in hilly landscapes of central Iran

This study aimed to identify indicator species and explore the most important environmental and management variables contributing to vegetation distribution in a hilly upper dam landscape in Zagros Mountain chain, Iran. A stratified random sampling method was used to collect topographic, edaphic, management and vegetation data. The density and cover percentage of perennial species were measured quantitatively. Indicator species were identified using the two-way indicator species analysis. Besides calculating physiognomic factors in sample sites, 24 soil samples were collected from 0 to 30 cm of soil depth and analyzed in terms of gravel percentage, texture, saturation moisture, organic matter, pH and electrical conductivity in saturation extract, lime percentage, soluble calcium and magnesium, available phosphorus, Cation Exchange Capacity(CEC) and soluble sodium and potassium. Multivariate techniques including Canonical Correspondence Analysis and Multi-Dimensional Scaling were used to explore the relationships of species with environmental and management variables. Seven plants were identified as indicator species due to being significantly correlated with management(grazing or non-grazing) and edaphic variables such as CEC, soil texture, pH, CaCO_3 percentage and physiographic variable including slope, elevation, and convex and concave formations(p 0.05). Overall, overgrazing and its subsequent effects on soil characteristics, loss of vegetation cover and trampling were found as the major causes of deterioration. Sustainable and integrated management practices such as the implementation of appropriate grazing systems were suggested to enhance soil quality and reduce the accelerated erosion in upper dam zones.     

Isolation, distribution and evaluation of cytotoxic and antioxidant activity of cultivable actinobacteria from the Oman Sea sediments

Screening bioactive natural products from bacteria is a determinative step in the drug discovery programs. The present study aim to isolate actinobacteria from the Oman Sea sediments for determining the effects of different culture media and treatments on the yield of the isolation process, and measure the DPPH radical scavenging and Artemia cytotoxic activity of culture extracts of the actinobacterial isolates. A total of 290 actinobacterial isolates were collected from 14 sediment samples. Heat treatment(40.68%) and M_4 medium(29.31%) exhibited the maximum isolation rates of actinobacteria. Streptomyces isolates were dominantly distributed in all of the investigated stations according to 16 S rRNA gene sequencing. The distribution pattern of Streptomyces followed a depth-dependent frequency trend, whereas the members of rare genera including Micromonospora, Nocardia Actinoplanes, Nocardiopsis, Saccharopolyspora and Crossiella were distributed in deeper stations. Approximately,25% of the examined isolates could scavenge 90% of 10~(–4) mol/L DPPH solutions at 1 250 μg/mL final concentration of their ethyl acetate culture extracts. Furthermore, the most potent extracts could scavenge DPPH radicals with IC50 ranges from 356.8 to 566.4 μg/mL. Brine shrimp cytotoxicity tests showed that 38.88% of the examined culture extracts exhibited LC_(50) lower than 1 000 μg/mL against the Artemia cells. Moreover, the most potent culture extracts exhibited LC_(50) range from 335.4 to 534.4 μg/mL. Phylogenetic analysis by 16 S rRNA gene sequence revealed that the OS 005, OS 263 and OS 157 closely related to Streptomyces djakartensis, Streptomyces olivaceus and Nocardiopsis dassonvillei respectively. These results suggested the widespread distribution of the antioxidant and cytotoxic producing actinobacteria in the Oman Sea sediments, which could be considered as promising candidates for the discovery of microbial bioactive compounds.     

Prediction of water inflow to mechanized tunnels during tunnel-boring-machine advance using numerical simulation

An accurate estimate of the groundwater inflow to a tunnel is one of the most challenging but essential tasks in tunnel design and construction. Most of the numerical or analytical solutions that have been developed ignore tunnel seepage conditions, material properties and hydraulic-head changes along the tunnel route during the excavation process, leading to inaccurate prediction of inflow rates. A method is introduced that uses MODFLOW code of GMS software to predict inflow rate as the tunnel boring machine (TBM) gradually advances. In this method, the tunnel boundary condition is conceptualized and defined using Drain package, which is simulated by dividing the drilling process into a series of successive intervals based on the tunnel excavation rates. In addition, the drain elevations are specified as the respective tunnel elevations, and the conductance parameters are assigned to intervals, depending on the TBM type and the tunnel seepage condition. The Qomroud water conveyance tunnel, located in Lorestan province of Iran, is 36 km in length. Since the Qomroud tunnel involved groundwater inrush during excavating, it is considered as a good case study to evaluate the presented method. The groundwater inflow to this tunnel during the TBM advance is simulated using the proposed method and the predicted rates are compared with observed rates. The results show that the presented method can satisfactorily predict the inflow rates as the TBM advances.     

Petrogenesis of post-collisional A-type granitoids from the Urumieh–Dokhtar magmatic assemblage,Southwestern Kerman,Iran: Constraints on the Arabian–Eurasian continental collision

Three plutons (Deh-Siahan, Bande-Bagh and Baghe-Khoshk Sharghi, collectively referred to as the DBB hereafter) in southwestern Kerman, in the southeastern part of the Urumieh–Dokhtar magmatic assemblage (UDMA) of the Zagros orogenic belt differ from the typical calc-alkaline metaluminous, I-type intrusions of the region. The DBB intrusions have a distinct lithological assemblage varying from diorite through monzogranite and monzonite to alkali feldspar syenite and alkali granite. The DBB granitoids are metaluminous to slightly peraluminous, alkaline to shoshonitic in composition and have high total alkali contents with K₂O > Na₂O, high FeO_T/MgO values, and low CaO and MgO contents. They are enriched in some LILEs (such as Rb and Th) and HFSEs (such as Zr, Y and REEs except Eu) and depleted in Sr and Ba relative to primordial mantle, and have low concentrations of transitional metals. These features along with various geochemical discriminant diagrams suggest that the DBB granitoids are post-collisional A-type granitoids, which had not been recognized previously in the UDMA. The chondrite-normalized REE patterns of the DBB granitoids show slightly enriched light REEs [(La/Sm)_N = 2.26–4.13], negative Eu anomalies [(Eu/Eu*)_N = 0.19–0.74] and flat heavy REE patterns [(Gd/Yb)_N = 0.80–1.87]. The negative Eu anomaly indicates an important role for plagioclase and/or K-feldspar during fractional crystallization. Whole-rock Rb–Sr isotope analysis yields an isochron age of 33 ± 1 Ma with an initial ⁸⁷Sr/⁸⁶Sr value of 0.7049 ± 0.0001. Whole-rock Sm–Nd isotope analysis gives ε_Nd^t values from + 2.56 to + 3.62 at 33 Ma. The positive ε_Nd^t and low I_Sr values of the DBB granitoids together with their T_DM of 0.6–0.7 Ga suggest their formation from partial melting of a lithospheric mantle source, modified by fluids or melts from earlier subduction processes. Melting of lithospheric mantle occurred via a dehydration melting process at pressures below the garnet stability field, as a consequence of lithospheric mantle delamination or break-off of a subducted slab and melting of the lithospheric mantle by upwelling of hot asthenosphere. On the basis of Rb/Sr age dating and the post-collisional geochemical signatures of the DBB granitoids, along with extensive pre-collisional volcanic eruptions in Middle Eocene, we suggest Late Eocene for the time of collision between the Arabian and Central Iranian plates. This also implies that the calc-alkaline I-type intrusions in the southwestern Kerman and in other parts of the UDMA may have formed in a post-collisional context.     

Issues in Eulerian–Lagrangian modeling of sediment transport under saltation regime

The saltation regime is very important for understanding the sediment transport mechanism. However,there is no consensus on a model for the saltation regime. This study answers several questions raised with respect to the Eulerian-Lagrangian modeling of sediment transport. The first question is why the previous saltation models that use different combinations of hydrodynamic forces yielded acceptable results? The second question is which shear lift model(i.e. a shear lift expression and its coefficient) is more appropriate? Another important question is which hydrodynamic forces have greater contributions to the saltation characteristics of a sediment particle? The last question is what are the contributions of the turbulence fluctuations as well as effects of using two-and three-dimensional(2 D and 3 D) models on the simulation results? In order to fairly answer these questions, a systematic study was done by considering different scenarios. The current study is the first attempt to clearly discuss these issues. A comprehensive 3 D saltation model for non-cohesive sediment was developed that includes all the hydrodynamic forces acting on the particle. The random nature of sediment transport was included using turbulent flow and bed-particle collision models. The eddy interaction model was applied to generate a3 D turbulent flow field. Bed-particle collisions were considered using the concept of a contact zone and a corresponding contact point. The validation of the model was done using the available experimental data for a wide range of sediment size(0.03 to 4.8 cm). For the first question, the results indicated that some of the hydrodynamic effects show opposing trends and some have negligible effects. With these opposing effects it is possible to adjust the coefficients of different models to achieve acceptable agreement with the same experimental data while omitting some aspects of the physics of the process. A suitable model for the shear lift force was developed by linking the lift coefficient to the drag coefficient and the contributions of the hydrodynamic forces and turbulence fluctuations as well as the consequences of using of 2 D and 3 D models were studied. The results indicate that the shear lift force and turbulent flow fluctuations are important factors for the saltation of both sand and gravel, and they cannot be ignored.     

Soil water dynamics under different forest vegetation cover: Implications for hillslope stability

Though it is well known that vegetation affects the water balance of soils through canopy interception and evapotranspiration, its hydrological contribution to soil hydrology and stability is yet to be fully quantified. To improve understanding of this hydrological process, soil water dynamics have been monitored at three adjacent hillslopes with different vegetation covers (deciduous tree cover, coniferous tree cover, and grass cover), for nine months from December 2014 to September 2015. The monitored soil moisture values were translated into soil matric suction (SMS) values to facilitate the analysis of hillslope stability. Our observations showed significant seasonal variations in SMS for each vegetation cover condition. However, a significant difference between different vegetation covers was only evident during the winter season where the mean SMS under coniferous tree cover (83.6 kPa) was significantly greater than that under grass cover (41 kPa). The hydrological reinforcing contribution due to matric suction was highest for the hillslope with coniferous tree cover, while the hillslope with deciduous tree cover was second and the hillslope with grass cover was third. The greatest contributions for all cover types were during the summer season. During the winter season, the wettest period of the monitoring study, the additional hydrological reinforcing contributions provided by the deciduous tree cover (1.5 to 6.5 kPa) or the grass cover (0.9 to 5.4 kPa) were insufficient to avoid potential slope failure conditions. However, the additional hydrological reinforcing contribution from the coniferous tree cover (5.8 to 10.4 kPa) was sufficient to provide potentially stable hillslope conditions during the winter season. Our study clearly suggests that during the winter season the hydrological effects from both deciduous tree and grass covers are insufficient to promote slope stability, while the hydrological reinforcing effects from the coniferous tree cover are sufficient even during the winter season. Copyright © 2018 John Wiley & Sons, Ltd.     

Acquisition de salinité et qualité des eaux d’une nappe profonde en Tunisie: approche statistique et géochimique

Abstract

The multi-layered Jeffara de Gabes aquifer system is greatly influenced by tectonics. This system is limited at the base and laterally by evaporite layers and has lateral contacts with the sebkhas (salt flats). The groundwater in this aquifer is characterized by high salinity (3–10 g L^-1). Multivariate statistical analysis and a geochemical approach were applied to determine the influence of the evaporite layers and sebkhas on the hydrochemical quality of the Jeffara de Gabes aquifer, and to understand the processes governing its salinity. According to these methods, and based in part on the Sr²⁺/Ca²⁺ ratio, it is demonstrated that the strong salinity of the groundwater is due to interactions between water and the evaporite layers that act as a substratum of this aquifer, as well as saltwater intrusion from the sebkhas. Moreover, the medium- to poor-quality groundwaters are characterized by geochemical interactions: cationic exchange and the precipitation/dissolution process of minerals in the aquifer formations.

Editeur Z.W. Kundzewicz

Citation Ben Alaya, M., Zemni, T., Mamou, A. et Zargouni, F., 2014. Acquisition de salinité et qualité des eaux d’une nappe profonde, Tunisie: approche statistique et géochimique. Hydrological Sciences Journal, 59 (2), 395–419.     

Dead Sea Basin Imaged by Ambient Seismic Noise Tomography

In the framework of the Dead Sea Integrated Research project (DESIRE), 59 seismological stations were deployed in the region of the Dead Sea Basin. Twenty of these stations recorded data of sufficiently high quality between May and September 2007 to be used for ambient seismic noise analysis. Empirical Green’s functions are extracted from cross-correlations of long term recordings. These functions are dominated by Rayleigh waves, whose group velocities can be measured in the frequency range from 0.1 to 0.5 Hz. Analysis of positive and negative correlation lags of the Green’s functions makes it possible to identify the direction of the source of the incoming energy. Signals with frequencies higher than 0.2 Hz originate from the Mediterranean Sea, while low frequencies arrive from the direction of the Red Sea. Travel times of the extracted Rayleigh waves were measured between station pairs for different frequencies, and tomographically inverted to provide independent velocity models. Four such 2D models were computed for a set of frequencies, all corresponding to different sampling depths, and thus together giving an indication of the velocity variations in 3D extending to a depth of 10 km. The results show low velocities in the Dead Sea Basin, consistent with previous studies suggesting up to 8 km of recent sedimentary infill in the Basin. The complex structure of the western margin of the Basin is also observed, with sedimentary infill present to depths not exceeding 5 km west of the southern part of the Dead Sea. The high velocities associated with the Lisan salt diapir are also observed down to a depth of ~5 km. The reliability of the results is confirmed by checkerboard recovery tests.