Optical properties of solid and liquid sulfur at visible and infrared wavelengths

Knowledge of the optical constants of elemental sulfur has potential applications to Venus, Jupiter, Io, Amalthea, and the Earth. The real part, n, of the index of refraction of liquid sulfur (at 133°C) and of solid orthorhombic sulfur (at 25°C) for the wavelength range 0.4–2.0 μm were measured ellipsometrically. The imaginary part, k, of the refractive index of liquid sulfur was obtained by transmittance measurements at the same temperature and wavelength range. The reflectance of semi-infinite slabs of solid and liquid sulfur is calculated using the measured n and k values. We confirm that sulfur melts on Io would be classified as “black” by the Voyager imaging system.     

Free vibration of semisubmersibles: A parametric study

Like any other engineering structure, the dynamic aspects of semisubmersible offshore platforms require serious consideration. The free vibrations of the semisubmersible structures have been investigated in the present work, in which the effect of the variation of the length, draft and hull spacings on the natural frequencies and mode shapes has been studied and the nature of the variations and their reasons have been discussed.     

Significance of correspondence between river discharge and proloculus size of benthic Foraminifera in paleomonsoonal studies

Variations in the mean proloculus size (MPS) of the benthic foraminiferal speciesRotalidium annectens were studied in a core collected off Karwar (20 m water depth), on the west coast of India. Comparison of downcore variations in the MPS with rainfall (five-year average) over a period of 100 years from the catchment area of the Kali River shows a direct correlation. This implies that higher MPS values indicate high rainfall over the catchment area and thus confirms the earlier hypothesis that the MPS is inversely related to salinity. The correspondence between MPS and rainfall shows a high potential in generating proximity data for the reconstruction of a paleo-precipitational history.     

Rhenium in rivers and estuaries of India: Sources,transport and behaviour

The concentration of dissolved and particulate Re have been measured in the Narmada, Tapi and the Mandovi estuaries in the Arabian Sea and the Hooghly estuary in the Bay of Bengal. Re concentration in water and particulate matter of these estuaries is highly variable. Re in river waters analysed varies from 1 to 41 pmol/kg, the lowest in the Mandovi and the highest in the Mahi river. Re concentrations in the rivers analysed except in the Mandovi river are higher than the average global riverine Re concentration of 2.1 pmol/kg. Based on this study and the available data, the contemporary global annual flux of dissolved riverine Re is estimated to be ~ 350 × 10³ mol with an average concentration of ~ 9.2 pmol/kg, much higher than the earlier estimates. Residence time of Re in the oceans based on this estimate is 175,000 years, ~ 4 times lower compared to earlier estimates. Re behaves conservatively in all the estuaries studied. Re concentrations of seawater in the Bay of Bengal and in the Arabian Sea, estimated from the data of the Hooghly and the Mandovi estuaries respectively are ~ 40 pmol/kg, similar to the open ocean Re values of the Arabian Sea measured in this study and the values reported for in other oceanic regions. However, the dissolved Re in the Gulf of Cambay is 2 to 5 times higher, consistent with the high Re measured in the Mahi estuary and in the coastal waters of the Gulf of Cambay. The source of high Re in the Gulf of Cambay seems to be anthropogenic, measurements of Re in rivers and industrial waste waters draining into the Gulf supply amount to ~ 2300 mol of Re annually. This anthropogenic supply coupled with high residence time of water in the Gulf contribute to its high Re. Re concentration in suspended sediments of the Narmada estuary varies from 1 to 2 pmol/g, and does not show any discernible trend with salinity.The contemporary global riverine Re supply to the oceans estimated in this study is ~ 2–4 times higher compared to its removal in the reducing (anoxic/suboxic) sediments, indicating non-steady state of Re in the ocean. High dissolved riverine Re flux coupled with high Re content in the Gulf of Cambay highlights the need of a detailed study of Re in the various global rivers and in oceans including coastal regions and semi enclosed basins of the world to understand its behaviour in various reservoirs and to constrain the residence time of Re in the ocean.     

Using spatial statistics to identify the uranium hotspot in groundwater in the mid-eastern Gangetic plain,India

The occurrence of uranium in groundwater is of particular interest due to its toxicological and radiological properties. It has been considered as a relevant contaminant for drinking water even at a low concentration. Uranium is a ubiquitously occurring radionuclide in the environment. Four hundred and fifty-six (456) groundwater samples from different locations of five districts of South Bihar (SB) were collected and concentrations of uranium (U) were analyzed using a light-emitting diode (LED) fluorimetric technique. Uranium concentrations in groundwater samples varied from 0.1 µg l^?1 to 238.2 µg l^?1 with an average value of 12.3 µg l^?1 in five districts of Bihar in the mid-eastern Gangetic plain. This study used hot spot spatial statistics to identify the distribution of elevated uranium concentration in groundwater. The hypothesis whether spatial distribution of high value and low value of U is more likely spatially clustered due to random process near a uranium hotspot in groundwater was tested based on z score and Getis-Ord Gi* statistics. The method implemented in this study, can be utilized in the field of risk assessment and decision making to locate potential areas of contamination.     

Calibration of AGRS System Using Transportable Pads in India: An Application to AGRS Data of Aravalli Basin,Banswada Block,South Rajasthan

Calibration of airborne gamma ray spectrometric system (AGRS) over standard radioactive sources of known elemental abundances is essential before carrying out airborne surveys. In India, fixed calibration pads were constructed in 1985. Since then calibration of AGRS system was carried out over the fixed pads. However the fixed pads are expensive to build and maintain. Also the large pads are subject to variations in radiation output due to variable moisture content and radon loss. Alternate approach is to construct transportable calibration pads which are discussed in this paper.Atomic Minerals Directorate for Exploration & Research (AMD) under Department of Atomic Energy has recently constructed five transportable calibration pads. Three pads i.e. K, U and Th have been spiked with the respective radioelements while keeping the minor radioelements to the least in order to obtain pure spectra. A composite pad has been constructed which contains all the three radioelements. This helps in cross verifying the obtained calibration results. A background pad has also been constructed which is helpful to obtain the background values during calibration.Analysis of the data acquired over the transportable pads with airborne gamma ray spectrometer (16.8 ltr) has been carried out and presented in this paper. A comparison with the data acquired over the fixed calibration pads is also included. There is a good agreement of results which suggests the use of transportable pads in future.     

A comparative study of soil erosion modelling by MMF,USLE and RUSLE

The quantitative assessment of spatial soil erosion is valuable information to control the erosion. The study area in a part of Narmada river in central India is selected. The main objective is to assess and compare the results obtained from three soil erosion models using GIS platform. Variation in the rate of erosion of the three models is compared considering varying slope, soil and land use of the area. Three models selected are Morgan–Morgan–Finney (MMF), Universal Soil Loss Equation (USLE) and Revised Universal Soil Loss Equation (RUSLE). The best fit or the most reliable model for the study area is selected after validation with the observed sedimentation data. The results give –39.45%, –9.60% and 4.80% difference in the values of sedimentation by MMF, USLE and RUSLE, respectively, from the observed data. Finally, RUSLE model has been found to be most reliable for the study area.     

Influence of multipurpose trees on agricultural crops in arid regions of Haryana, India

The effects of multipurpose trees on the productivity of agricultural crops were studied in the arid regions of Haryana. In one of the experiments, wheat was grown on irrigated farms having scattered trees ofDalbergia sissoo, Azadirachta indica, Prosopis cinerariaandAcacia nilotica. Data of wheat yield for each tree species at different distances (1, 3, 5, and 7 m) and four directions (East, West, North and South) from the tree bases and control (no trees) were collected. Results indicate thatAzadirachta indicaandProsopis cinerariadid not produce any significant difference in the wheat yield while the other two species (Dalbergia sissooandAcacia nilotica) gave a reduction in yield.A. niloticahad a more significant and prominent effect and a reduction of 40 to 60 % wheat yield was observed.Dalbergia sissooreduced yield by 4 to 30 % but the reduction was only up to a distance of 3 m. In general, the impact of trees on productivity was observed up to 3 m distance and there was little, if any, impact up to 5 m and almost no impact at 7 m.In another experiment,D. sissoo(18-years-old) was raised as windbreak and productivity of cotton was assessed. The tree belt reduced the wind speed by 15 to 45 %, depending on season and wind speed. The influence of trees on cotton yield was observed to be negative up to 2H (36 m), where H is tree height, i.e. 18 m. Cotton productivity was observed to be maximum between 2H and 5H. Depending upon orientation of tree belt, the increase in cotton yield was found to be 4 to 10 %.     

Triton: stratospheric molecules and organic sediments

Hydrocarbons and nitriles are produced in Triton's stratosphere by energetic electrons from Neptune's magnetosphere and other charged particle sources. Laboratory plasma experiments reported here show a substantial yield of molecules from low pressure flows of 10(-3) CH4 in N2 appropriate to Triton if both CH4 and N2 are saturated at the surface. An active magnetosphere similar to that of Uranus would result in a flux approximately 0.3 erg cm-2 s-1 of 0.1-1 MeV electrons in Triton's stratosphere; molecular production rates are then 10(6)-10(8) cm-2 s-1 for NH3, C2H2, HCN, and NCCN; tens of hundreds of gm cm-2 of these compounds per 10(9) yr (and lesser quantities of at least eight other molecules experimentally detected) would freeze to fine-grained white condensates in the lower stratosphere and sediment to the surface. Along with dark/colored organic haze produced in the stratosphere and other heteropolymers produced at the surface, these condensates are subjects to redistribution by aeolian processes and may appear as lag deposits and/or sediment layers. A simple eddy diffusion model indicates abundances approximately 10(19) molec cm-2 for HCN and C2H2, and > 10(17) molec cm-2 for NCCN, CH3CCH, CH2CCH2, and CH3CN in the stratosphere; these and other organic molecules will be detectable by IRIS if the stratosphere is (as expected) heated through ultraviolet and visible light absorption by the haze.     

Three-dimensional hybrid modelling of soil-structure interaction

A three-dimensional hybrid model for the analysis of soil-structure interaction under dynamic conditions is developed which takes advantage of the desirable features of the finite element and substructure methods and which minimizes their undesirable features. The modelling is achieved by partitioning the total soil-structure system into a near-field and a far-field with a hemispherical interface. The near-field, which consists of the structure to be analysed and a finite region of soil around it, is modelled by finite elements. The semi-infinite far-field is modelled by distributed impedance functions at the interface which are determined by system identification methods. Numerical results indicate that the proposed model makes possible realistic and economical assessment of three-dimensional soil-structure interaction for both surface and embedded structures.