抽油机悬点投影测量仪

油田抽油机的抽油杆幌动幅度过大，是引起抽油杆断裂的一个重要因素，检测这种幌动幅度是防止抽油杆断裂的一种有效手段。设计了一种基于面阵CCD和普通半导体激光器（LD）测量这种幌动的悬点投影测量方法，通过数字卷积滤波，达到了范围为0－40mm，误差＜0.2mm的技术检测指标。     

A standard format for reporting PILPS experiments

In model inter-comparisons one major obstacle is the format of the reported data. To facilitate the analysis of the results from the different models they should all be reported in the same format. This requires that the format is flexible enough to be easily implemented into the different land surface schemes. It should also be fault tolerant and allow a few consistence checks to avoid erroneous data to be submitted. The present note describes such a format developed for the PILPS project. After discussing the aim of this new format we present the routines which are used to write and read data. Finally two applications are described which allow the user to perform a number of consistency checks on the data.     

“BASS 300 PARACOM”: a “model” underwaterparametric communication system

Parametric transduction offers valuable advantages for underwater acoustic communications. Perhaps the most significant benefit is the fact that high directivity is achieved by means of a physically small transmit transducer. This feature may, ultimately, be employed to permit long-range, low-frequency communication using a compact source. The high directivity is desirable to combat multipath propagation and to achieve data communications in water which is shallow by comparison with range. A real-time, high data-rate “model” differential phase shift keying (DPSK) communication system has been constructed and demonstrated. This system uses parametric transduction, with a 300-kHz primary frequency and a 50-kHz secondary frequency. Experimental results show that the system can be employed to combat multipath propagation in shallow water and can achieve high data-rate text and color image transmission at 10 and 20 kb s^-1 for 2-DPSK and 4-DPSK, respectively, through a transmission bandwidth of 10 kHz. The “model” system was developed to confirm performance predictions for a future, operational long-range link employing a 50-kHz primary frequency and a 5-kHz secondary frequency     

Modelling of deformation response and chemo‐mechanical coupling in chalk

A constitutive relation is derived for describing the mechanical response of chalk. The approach is based on a phenomenological framework which employs chemo‐plasticity. The properties of the material are assumed to be affected by the physico‐chemical processes that occur through the interaction between the skeleton and the pore fluid. The underlying mechanism is discussed by invoking a micromechanical analysis. The performance of the framework is illustrated by examining the evolution of mechanical characteristics in the presence of different pore fluids. Copyright © 2006 John Wiley & Sons, Ltd.     

CCD联合平差方法及其初步实例检验

在常规照相天体测量工作中 ,对暗天体的定位是采用逐级定标星过渡的方法实现的。由于星表系统差和局部差的存在 ,最终定位结果可能包含难以把握的误差积累。在CCD小视场观测情况下时常难以找到足够数量的定标星。鉴于此 ,推导了CCD观测联合平差方法的严格矢量表达式 ,以期通过共同星的过渡 ,实现大天区统一平差。原理上此方法可实现相对于河外天体的定位 ,以削弱星表系统差和局部差对定位结果的影响。讨论了CCD联合平差方法实现中的问题 ,包括底片常数模型选择、切点位置改正、共同星的较差改正和法方程解算方法等 ,并分析了具体的处理措施。用实例初步检验了CCD联合平差方法的效果 ,表明通过对多张CCD观测的联合平差 ,可以削弱单张CCD观测参考星数目过少、单张CCD观测参考星分布不均、个别参考星存在位置偏差和局部区域参考星存在系统性位置偏差等不利因素对归算结果的影响 ,进而达到扩大视场和提高归算精度的目的     

成团天体系统成员概率计算的有效性问题

本文提出了一个普适的衡量成团天体系统成员概率计算结果的有效性指数：Ｅ＝１－ＮΣ｛Ｐ（ｉ）［１－Ｐ（ｉ）］｝／ΣＰ（ｉ）Σ［１－Ｐ（ｉ）］｝，并以此对以Ｓａｎｄｅｒｓ方法为基础的各种成员确定模型的有效性进行了分析．从总体上说，运动学资料（自行、视向速度等）是一类有效的观测判据．     

Application of MODFLOW and geographic information system to groundwater flow simulation in North China Plain, China

MODFLOW is a groundwater modeling program. It can be compiled and remedied according to the practical applications. Because of its structure and fixed data format, MODFLOW can be integrated with Geographic Information Systems (GIS) technology for water resource management. The North China Plain (NCP), which is the politic, economic and cultural center of China, is facing with water resources shortage and water pollution. Groundwater is the main water resource for industrial, agricultural and domestic usage. It is necessary to evaluate the groundwater resources of the NCP as an entire aquifer system. With the development of computer and internet information technology it is also necessary to integrate the groundwater model with the GIS technology. Because the geological and hydrogeological data in the NCP was mainly in MAPGIS format, the powerful function of GIS of disposing of and analyzing spatial data and computer languages such as Visual C and Visual Basic were used to define the relationship between the original data and model data. After analyzing the geological and hydrogeological conditions of the NCP, the groundwater flow numerical simulation modeling was constructed with MODFLOW. On the basis of GIS, a dynamic evaluation system for groundwater resources under the internet circumstance was completed. During the process of constructing the groundwater model, a water budget was analyzed, which showed a negative budget in the NCP. The simulation period was from 1 January 2002 to 31 December 2003. During this period, the total recharge of the groundwater system was 49,374 × 10⁶ m³ and the total discharge was 56,530 × 10⁶ m³ the budget deficit was −7,156 × 10⁶ m³. In this integrated system, the original data including graphs and attribution data could be stored in the database. When the process of evaluating and predicting groundwater flow was started, these data were transformed into files that the core program of MODFLOW could read. The calculated water level and drawdown could be displayed and reviewed online.     

祁连山不同植被类型对积雪消融的影响

为研究祁连山植被对积雪消融的影响, 利用人工调查积雪深度逐日变化量和积雪盖度变化, 并结合空气雪面感热通量(SH)观测, 对祁连山水源林生态站排露沟流域海拔2 600～2 700 m青海云杉林、灌丛林、林缘、阳坡草地在2003-2007年的积雪消融进行了研究, 每年的观测从10月降雪开始到翌年5月积雪消融完结束, 共获取数据134 400个. 结果表明: 当SH<0时, 积雪消融停止;当SH>0时, 积雪消融开始;植被可以减缓积雪消融速率, 有植被的地方消融速率减慢, 反之则加快;不同植被消融速率大小顺序为草地>林缘>灌木林>乔木林;同一植被、不同坡向消融速率不同, 半阳坡云杉林＞半阴坡云杉林＞阴坡云杉林. 积雪含水率随气温升高而增大, 1月融化积雪占整个积雪的5%, 2月增大到28%, 大量积雪在3月消融, 占55%. 从坡位看, 下坡消融速率最大;在一个垂直带上, 低海拔消融速率大于高海拔. 温度是影响积雪消融的主要因子, 积雪消融速率随温度升高而增大, 反之则减小.     

浙江杭州地区中下奥陶统岩石地层研究

笔者以城市基岩地质填图和剖面研究资料为基础,选择临安市板桥乡南山上中下奥陶统剖面为候选层型,根据剖面的地层层序、岩性组合、分界标志,结合区域变质的总体特征,重新厘定、划分了4个组级岩石地层单位,并依据荆山岭与板桥剖面的地层、生物化石对比,确定其地层时代为早中奥陶世。这对重建杭州地区层型剖面与地质遗迹保护、岩石地层填图、奥陶纪石灰岩矿产资源的开发利用都具有重要意义。     

武宁县花香林泥石流灾害成因及防治对策

武宁县花香林地处江西省北部山区,是泥石流多发区,先后于1958年6月和1998年6月爆发大型的泥石流,严重影响了当地人民的生命、财产安全和经济发展.通过收集大量相关资料及现场实地调查,在分析该泥石流基本特征的基础上,对泥石流的成因进行探讨.结果表明,复杂的岩性及地质构造为泥石流的形成提供了丰富的固体物来源,是泥石流形成的基础;强降雨是形成泥石流灾害的触发条件;强降雨、地震两者相叠加时,就可能爆发泥石流.提出了对泥石流防治对策相应的建议,对山地的防灾减灾具有指导意义.