A feasibility study of cosmic microwave radiation via graphite needles

It is pointed out that the total amount of microwave radiation that could possibly be generated by all the graphite needles in space would be considerably smaller than the observed total energy of the cosmic microwave background radiation. The question of relevant optical depth of the cloud containing the needles has been examined. It is found that the optical depth is not sufficiently large for the cloud to radiate like a black body.     

Discussion: A review on the behaviour of helical piles as a potential offshore foundation system

Abstract

Helical piles have emerged as an attractive foundation system for offshore applications with renewed interest from the offshore community. Significant research gap currently exists in transferring this technology offshore and this paper discusses how existing and emerging knowledge can be successfully used to bridge some of the gaps. We focus on the Coupled Eulerian Lagrangian (CEL) large deformation finite element (LDFE) modelling technique that is commercially available and can be used to model the three-dimensional installation process with consideration of strain rate and softening effects in soft offshore clays. A helical pile of L?=?7.5?m long is modelled with one or two large-diameter helices (D?=?2?m) attached to a central shaft of d?=?0.5?m in diameter.The net effect of strain rate and softening is to increase the installation torque. The measured torque is within the range of 200–400?kN.m for the offshore clay and the pile geometry studied. Additional helices increase the uplift force but to a lesser degree than that of the measured torque. Remoulding induced strength reduction is found to be within the range of 25–33% of the intact clay strength. Issues of extracting and reusing offshore helical pile foundations are discussed.     

A methodology for assessing the reliability of taut and slack mooring systems against instability

In the present study, a methodology for reliability assessment of slack and taut mooring systems against instability has been presented. For this purpose, first, stability analysis of slack and taut mooring systems has been carried out and instable regions are obtained using procedure available in the literature. Having known the instable region(s), methodology for reliability assessment has been proposed which is based on Monte Carlo Simulation technique. After using the proposed methodology, probabilities of failure and reliability indices has been obtained for the above systems. Some parametric studies, such as, effect of lower and upper limits of instability and effect of frequency range of generations are also included to obtain the results of practical interest.     

Automated Image Registration for Hydrologic Change Detection in the Lake-Rich Arctic

Multitemporal remote sensing provides a unique tool to track lake dynamics at the pan-Arctic scale but requires precise registration of thousands of satellite images. This is a challenging task owing to a dearth of stable features to be used as tie points [(TPs), i.e., control points] in the dynamic landscapes. This letter develops an automated method to precisely register images in the lake-rich Arctic. The core premise of the method is that the centers of lakes are generally stable even if their shorelines are not. The proposed procedures first extract lakes in multitemporal satellite images, derive lake centroids and match them between images, and then use the centroids of stable lakes as TPs for image registration. The results show that this approach can achieve subpixel registration accuracy, outcompeting the conventional manual methods in both efficiency and accuracy. The proposed method is fully automated and represents a feasible way to register images for lake change detection at the pan-Arctic scale.      

Room temperature solid-state detectors for Gamma ray burst spectroscopy

We have evaluated several solid state detectors which offer excellent energy resolution at room temperature for soft X-rays. For soft X-rays (< 1 keV to 20 keV), silicon P-intrinsic-N (PIN) and avalanche-mode photodiodes (APD's) have been studied. Using commercially available charge sensitive pre-amplifiers, these photodiodes provide 1 keV resolution without cooling. Their detection efficiencies are limited to about 20 keV and 15 keV, respectively. To overcome this constraint, we have studied thick (1.5 mm) PIN detectors made by Micron Semiconductor Ltd., U.K., as well as compound semiconducting materials with high Z constituents such as CZT and PbI₂. PbI₂ allows high detection efficiencies of photons up to 100 keV with detectors 100–300 microns thick. These new detectors offer the capability to study the low-energy spectral evolution of Gamma ray bursts (GRBs). A matrix of these detectors could be used as an image plane detector with moderate spatial resolution for imaging.     

Geochemical modeling,fate distribution,and risk exposure of potentially toxic metals in the surface sediment of the Shyok suture zone,northern Pakistan

The objective of the current study was to assess the contamination of potentially toxic metals (PTMs) in weathered surface sediment, along stream tributaries, and surrounding area of the river Chitral, Shyok suture zone district Chitral, Pakistan. To understand the geochemical features of 113 sediment, samples were collected from the Mirkhani and Drosh area. Then, different statistical tools including the geo-accumulation index (Igeo), cluster analysis (CA), principal component analysis (PCA), and ecological risk assessment (ERA) were used to unravel the origin, intensity, and exposure level of PTMs to control risk and restore the ecosystem within the study area. The results for the PTMs namely nickle (Ni), chromium (Cr), copper (Cu), cadmium (Cd), lead (Pb), zinc (Zn), and cobalt (Co) in Mirkhani and Drosh were in the following ranges: 10–150, 15–210, 15–250, 0.08–1.00, 10–70, 76–240 and 14–51; and 13–240, 17–210, 15–150, 0.08–0.60, 7–140, 47–150 and 13–36 mg/kg, respectively. In consequence, the potential ecological risk caused by Pb, Ni, Cu, Co, Cr, and Zn is reflected by the percentages of samples with an ecological risk index (ERI) greater than one which were 100%, 91%, 100%, 100%, 92%, and 100%, respectively. However, the overall mean decreasing order of ecological risk of PTMs in the district Chitral was Pb > Ni > Cu > Co > Cr > Zn > Cd. Moreover, the PCA yielded 78% variability which indicated that mineral prospects play an important role in the contamination of sediment. Furthermore, the mineral phases of Pb and Zn suggested supersaturation, while that for Cd revealed unsaturation. The results of Igeo, ERI, and CA indicated contamination of PTMs in the study area. The ERI value of Pb, Ni, Cu, Co, Cr, and Zn was higher than 1 suggesting an ecological risk in the study area. Moreover, the current study showed the dominance of geogenic contamination with major contributions from ultramafic rock and known mineral prospects. Therefore, contaminated sediment of the Shyok suture zone is extremely detrimental to the aquatic ecosystem of the study area.     

Continuous process study on simultaneous nitrification–denitrification of high ammoniacal nitrogen load wastewater in aerobic–anoxic sequencing bioreactors

The study focused on the feasibility of high NH₄ ⁺–N (400–600 mg/L) and COD load at two different hydraulic retention times (HRTs = 36 and 24 h) in two identical aerobic–anoxic sequencing bioreactors which were constructed in series in a single system using a specifically designed single biomass containing autotrophic nitrifying and heterotrophic denitrifying bacteria. Internal recirculation of synthetic wastewater from one tank to other was not carried out like the conventional aerobic–anoxic processes. Cycles of 15 days under sequences of aerated and non-aerated periods of three hour each were repeated during each continuous flow experiment conducted. Sodium bicarbonate and sodium acetate were selected as the appropriate inorganic and organic carbon sources. The results showed that the HRT may not affect the simultaneous nitrification and denitrification processes. Average nitrification ratio was obtained to be above 20 mg/L NH₄ ⁺–N/h daily. Results of 90 days’ operation also showed high removal efficiencies of ammoniacal nitrogen of about 83% daily. The main advantage of this process includes efficient ammoniacal nitrogen removal without separated aerobic and anoxic tanks, decrease operating costs due to the lesser oxygen concentration requirement in the bioreactors.     

Shigar valley gemstones,their chemical composition and origin,Skardu, Gilgit-Baltistan,Pakistan

A variety of gemstones is being mined in the Shigar valley, Skardu, Pakistan. These include beryl (goshenite and aquamarine), tourmaline (schorl), garnet (almandine–spessartine), apatite, topaz, fluorite, zoisite, clinozoisite, and axinite, mostly occurring in complex or zoned pegmatites and metamorphic rocks. These have been analyzed using electron probe micro-analyzer and X-ray diffractometer. The mineral chemistry of each gemstone is similar to its respective typical gemstone variety with homogenous chemical composition. Field and chemical characteristics suggest that beryl, tourmaline, garnet, apatite, topaz, and fluorite are occurring in zoned pegmatites which are largely formed by magmatic hydrothermal fluids in the cavities and vugs within the intermediate zone. However, zoisite, clinozoisite, and axinite may have a metamorphic and/or metasomatic origin.