An estimate of hypocentre location accuracy in a large network: possible implications for tectonic studies in Italy

Data recorded by the Italian Telemetered Seismic Network (ITSN) of the Istituto Nazionale di Geofisica (ING) have been widely used in recent years to image slab structures and to find evidence for active processes along the Italian Peninsula. However, the use of seismic data for geostructural purposes may be affected by the well-known trade-off between earthquake location and seismic-velocity parameters. Furthermore, the confidence ellipse predicted by standard procedures may be inadequate for the representation of the probable error of a computed localization. This paper evaluates the probable errors on the hypocentre determinations of the seismic events recorded by the ITSN, using a Monte Carlo method.
We compute synthetic arrival times using a 1-D velocity model appropriate as an average for the Italian area. The hypocentres used are all those recorded by the ITSN during the period January 1992 to March 1994 (1972 events). Station locations are those of the current ITSN configuration. The synthetic arrival times are perturbed with a Gaussian distribution of errors and input to ING's standard hypocentral location procedure, but using crustal velocities differing by 10 per cent from those used to generate them. Each simulation is repeated at least 30 times. Average absolute shifts of hypocentres are assessed in grid cells of linear dimension 33 km covering the whole Italian region.
For regions within the ITSN, shifts are typically 5–10 km in location and up to 20 km in depth. However, for offshore and coastal regions, they are much greater: 50 km or more in both location and depth (far exceeding the equivalent uncertainties quoted by ING bulletins). Possible consequences of this are highlighted by producing a cross-section of subcrustal hypocentres from the Adriatic to the Tyrrhenian Sea, where the large uncertainty in depth precludes any confident interpretation of dipping tectonic features.     

The role of the seismic trigger in the Calitri landslide (Italy): historical reconstruction and dynamic analysis

The study covered by this paper was focused on the historical case of the Calitri landslide, which was repeatedly reactivated by earthquakes, as reported since 1694. The town of Calitri (Southern Italy) is located on a ridge whose southern slope, from its top to the Ofanto river valley floor, has been historically affected by major landsliding. The last record of recurrence of the Calitri landslide leads back to the 1980 Irpinia earthquake, which caused significant damage to the town and had pervasive and visible ground effects. Based on a detailed historical reconstruction of landsliding and seismicity at Calitri, the study analysed the current static and dynamic stability of the landsliding slope by means of a finite-difference numerical analysis, taking into account the various factors of landslide initiation and kinematics. The results of the numerical analysis: (i) were consistent with the roto-translational mechanism observed upon the latest reactivation of the landslide; (ii) demonstrated that excess pore pressure redistribution caused a lag between the seismic trigger and the initiation of landsliding; and (iii) showed the impact of seismic input frequency on propagation and depth of slope instability.     

Interactions among metals in the spectrochemical determination of trace amounts of cadmium in marine mussels

The determination of trace amounts of inorganic elements by electrothermal atomic absorption spectrophotometry (ETA-AAS) or inductively coupled plasma atomic emission spectrometry (ICP-AES) suffers from some kinds of interference due to the inorganic fraction of the matrix of many environmental samples. The ratio between a major matrix element and the analyzed trace element plays an important role in the spectrochemical behaviour of the latter. The resulting enhancing or depressing effect also gives rise to severe faults when the well known standard addition method (SAM) is used. The present work shows the interactions due to the presence of elements such as calcium, sodium, potassium, magnesium and iron during the spectrochemical determinations of trace amounts of cadmium in marine mussels. A possible liquid anion exchange extraction is suggested for the analysis of cadmium by ETA-AAS.     

Dynamic response and optimal design of structures with large mass ratio TMD

This paper investigates the dynamic behavior and the seismic effectiveness of a non‐conventional Tuned Mass Damper (TMD) with large mass ratio. Compared with conventional TMD, the device mass is increased up to be comparable with the mass of the structure to be protected, aiming at a better control performance. In order to avoid the introduction of an excessive additional weight, masses already present on the structure are converted into tuned masses, retaining structural or architectural functions beyond the mere control function. A reduced order model is introduced for design purposes and the optimal design of a large mass ratio TMD for seismic applications is then formulated. The design method is specifically developed to implement High‐Damping Rubber Bearings (HDRB) to connect the device mass to the main structure, taking advantage of combining stiffness and noticeable damping characteristics. Ground acceleration is modeled as a Gaussian random process with white noise power spectral density. A numerical searching technique is used to obtain the optimal design parameter, the frequency ratio alpha, which minimizes the root‐mean‐square displacement response of the main structure. The study finally comprises shaking table tests on a 1:5 scale model under a wide selection of accelerograms, both artificial and natural, to assess the seismic effectiveness of the proposed large mass ratio TMD. Copyright © 2011 John Wiley & Sons, Ltd.     

Evaluation of seismic vulnerability of a complex RC existing building by linear and nonlinear modeling approaches

Recent earthquakes, that stroked Italian regions in past decades (Umbria— Marche 1997; Molise 2002; L’Aquila 2009), pointed out the high vulnerability of reinforced concrete existing buildings causing severe damages in the structures and consequently life losses. This is mainly due to the fact that such structures were often built without reference to seismic actions or on the basis of old standard provisions. Nowadays in Italy, Public Authorities are requested to evaluate the seismic vulnerability of their building stock assessing the actual capacity of such structures, as a consequence of new hazard levels and seismic microzonation introduced by new standards. According to Eurocode 8 or Italian standard NTC 2008, the seismic analysis of existing reinforced concrete buildings can be performed by one of the established procedure (i.e. Linear Static Analysis LSA, Linear Dynamic Analysis LDA, Nonlinear Static Analysis NSA, Nonlinear Dynamic Analysis NDA), depending on the achieved knowledge level about the structural system and materials. In order to compare efficiency and differences of previously described approaches, a deep investigation was executed on a reinforced concrete existing building whose dynamic behaviour was evaluated by an experimental dynamic analysis. In such a way, updated models were obtained and adopted for seismic analysis performed by using linear and nonlinear approaches, taking into account the stiffness and strength contribution of masonry infill walls. It was so possible to get useful indications on the reliability and discrepancies of different modelling approaches as well as on the influence of masonry infills on the seismic response of existing r.c. buildings.     

Mt. Melbourne volcano,antarctica: Evidence of seismicity related to volcanic activity

Characterization of the microseismic activity (M _L <2.0) has been performed at Mt. Melbourne since 1990. We recorded a group of low frequency events with common morphological characteristics, i.e., an emerging onset, an unclear second phase and a sharply dropping coda. Spectral analysis of events recorded at more than one station indicates that the seismogram characteristics and spectral content are largely due to source effects. A polarization filter applied to a set of three component data revealed a first phase made up ofP waves followed (after about 0.9–1.4 sec.) by a second phase probably composed ofSH-type waves. Particle motion analysis detected a seismic ray angle direction mainly between N70°E and N110°E and apparent angle of incidence between 35° and 48° for the first phase. The studied seismicity was localized in an area on the eastern slope of Mt. Melbourne Volcano which presents a surface temperature anomaly (Mazzarini andSalvini, 1994). We formulate two hypotheses for the type of earthquakes recorded: 1) long-period events involving active presence of magmatic fluids in the source processes; 2) or the result of fracturing processes (shear?) in a medium characterized by transition between brittle and plastic behaviors. In the latter hypothesis the superficial thermal anomaly may be a symptom of this behavior at depth and is confirmed by the lown values observed for the exponential fit in the codaQ analysis.     

A prototype system for earthquake early-warning and alert management in southern Italy

The Irpinia Seismic Network (ISNet) is deployed in Southern Apennines along the active fault system responsible for the 1980, November 23, M _s 6.9 Campania–Lucania earthquake. It is set up by 28 stations and covers an area of about 100 × 70 km². Each site is equipped with a 1-g full-scale accelerometer and a short-period velocimeter. Due to its design characteristics, i.e., the wide dynamic range and the high density of stations, the ISNet network is mainly devoted to estimating in real-time the earthquake location and magnitude from low- to high- magnitude events, and to providing ground-motion parameters values so to get some insights about the ground shaking expected. Moreover, the availability of high-quality of data allows studying the source processes related to the seismogenetic structures in the area. The network layout, the data communication system and protocols and the main instrumental features are described in the paper. The data analysis is managed by Earthworm software package that also provides the earthquake location while custom software has been developed for real-time computation of the source parameters and shaking maps. Technical details about these procedures are given in the article. The data collected at the ISNet stations are available upon request.     

Modeling of Rayleigh waves dispersion in the Sannio region (Southern Italy) from seismic active refraction data

Short period surface waves, recorded during a seismic refractionsurvey in the Sannio region (Southern Italy), have been modeled to infera shallow velocity model for the area. Based on the decrease of resolutionwith depth, due to the bias on group velocity estimates arising frominterference of the Rayleigh waves with higher modes, we carried out aprocedure of fitting, with synthetic seismograms, of selected filtered traceswith a gaussian filter, having a width at half height equal to 1 Hz and acentral frequency lying in the range [1,4] Hz. We estimated the likelihoodbetween synthetic and observed seismograms by measuring their semblance.In this way we were able to infer a more refined local velocity modelcharacterized by a high Vp and Vs vertical gradient in the sedimentarycover. Two ad hoc resolution studies, based on group velocity andamplitude data respectively, indicate that the local velocity model is a goodvelocity model also for the entire studied area. The increase in the numberof available data when using amplitude information allows us to make amore selective choice in the model parameter space (Vp and Vs of eachlayer) and to solve for the Vp/Vs ratio. The inferred Vp velocity in thehalf-space is equal to 2.8 km/s. This value is in excellent agreement withthat inferred by other authors (3 km/s) by modeling P-wave travel timevs. distance. The best-fit model furnish low Vp/Vs for the sedimentarycover so indicating a high degree of the sediment's compaction in thestudied area. The inferred shallow high-velocity gradient indicates thatthe shallow sedimentary layer in the area could trap and focus the energytraveling into it.     

Flow time estimation with spatially variable hillslope velocity in ungauged basins

The automated spatial estimation of the hillslope runoff dynamics is used as a valuable tool for the estimation of the travel time distribution (flow time), a major factor for the hydrologic prediction in ungauged basins. In fact, while the flow time function is usually obtained by rescaling the flow paths with constant channel and hillslope velocities, in this work a spatially distributed kinematic component, as a function of terrain features and in particular slope and land use, is implemented and its influence on the hydrologic response is tested by means of the Width Function Instantaneous Unit Hydrograph (WFIUH) framework. Hillslope surface flow velocities are evaluated by applying different uniform flow formulas within an automated DEM-based (terrain analysis) algorithm. A comparison test of the performances of the Manning, Darcy, Maidment and Soil Conservation Service uniform flow equations is performed for several case studies in Italy pertaining to different climatic and geomorphic conditions. Results provide new insights for a better understanding of the flow time function also introducing a more parsimonious and physically-based calibration scheme of the WFIUH.