Gold deposits associated with the gabbroic rocks at Tirek area,western Hoggar,Algeria: fluid inclusion study

The Tirek gold deposit hosted in the Archean shield is one of the richest sources of mined gold for Algeria. The deposit is controlled by the East Ouzzal shear zone (EOSZ), a transcurrent N–S lithospheric fault. The EOSZ is a late Pan-African dextral-ductile shear zone separating two contrasting Precambrian domains: the Archean In Ouzzal block to the west (Orthogenesis with subordinate metasediments reworked and granulitized during the ca. 2 Ga Eburnean event) and a middle Proterozoic block to the east involved in the ca. 600 Ma Pan-African event. The auriferous quartz veins are mainly oriented in two directions, N–S veins hosted in mylonitic rocks and NE–SW veins hosted in gabbroic or gneissic bands. The NE–SW veins contain the richest ore. Gold ore is found in a system of veins and lenticular quartz veinlets arranged in anastomosing networks. The hydrothermal alteration associated with these veins is characteristically a carbonate-sericite-albite-pyrite assemblage. Gold is the main metal of economic importance; it is disseminated in the quartz as grains or fibers along microcracks and as microscopic grains in the host rocks. Microthermometric results and Raman laser data from fluid inclusions demonstrate that the ore-forming fluids contained H₂O-CO₂±CH₄ and were low salinity. Homogenization temperatures are commonly 250–310 °C. In the Tirek deposit, the role of the shear zone that hosts the mineralization was to drain the hydrothermal fluid. Interactions between the fluid and the mafic host rocks and CO₂ also contributed to the formation of the hydrothermal gold deposit at Tirek.     

Rifting of Kyushu, Japan, based on the fault-controlled concurrent eruption of oceanic island basalt-type and island arc-type lavas

The tectonic environment of Kyushu, Japan is affected both by the subduction of the Philippine Sea plate and by the extensional tectonics related to rifting of Okinawa Trough at the eastern margin of the Eurasia Plate. We found that the Sendai fault zone acts as a channel for concurrent eruption of oceanic island basalt (OIB)-type and island arc (IA)-type basaltic rocks, propagating west to east in the Sendai region of southern Kyushu. The location of the Sendai fault zone is likely to correspond to the left-lateral shear zone in southern Kyushu as inferred by GPS Earth Observation Network. A similar magmatic association is present in the Beppu–Shimabara (BS) graben system in central Kyushu. The associate magmas of OIB-type rocks in Kyushu can be classified into typical, EM II-like and their intermediate OIB-type magmas in addition to MORB-like OIB-type magma in ⁸⁷Sr/⁸⁶Sr–Nb/Y systematics. Typical OIB-type and intermediate OIB-type magmas are erupted within the Sendai fault zone and BS graben system, respectively. The former is characterized by highest Nb/Y but low ⁸⁷Sr/⁸⁶Sr similar to MORB-like OIB-type magma erupted in northern Kyushu and the latter has intermediate Nb/Y and ⁸⁷Sr/⁸⁶Sr between typical and EM II-like OIB-type magmas. Almost all the IA-type rocks within the Sendai fault zone are generated from parental IA-type magma in Kyushu and characterized by weak crustal assimilation, having the lowest ⁸⁷Sr/⁸⁶Sr similar to typical OIB-type magma but the highest ¹⁴³Nd/¹⁴⁴Nd of arc magmas in Kyushu. The ages of both types of basaltic rocks within the Sendai fault zone range from 1.6 to <0.01?Ma clearly younger than those of andesitic rocks on northern and southern outsides of the fault zone and become younger from west to east. Initial formation of the fault zone has been induced by the counterclockwise rotation of southern Kyushu during the last 2?Ma as well as the BS graben system. Kyushu has continued to be split into three parts by the Sendai fault zone and BS graben during the Quaternary; northern, central, and southern zones. Their initial formation ages are likely to be linked to the initial rifting age of the middle Okinawa Trough back-arc basin.     

A Fluid Inclusion Study on Columnar Adularia from the Hishikari Low-sulfidation Epithermal Gold Deposit, Japan

Abstract: In the Hishikari low-sulfidation epithermal gold deposit, Japan, columnar adularia crystals commonly precipitated directly on to the fracture surface of wall rock, and then electrum precipitated on the columnar adularia with fine-grained adularia and quartz. To reveal the characteristics of mineralizing fluids and the elevation of paleo-water tables at the earliest stage of mineralization in the Honko-Sanjin zone of the Hishikari deposit, the fluid inclusions in the columnar adularia in gold-bearing quartz–adularia veins were studied.
Coexistence of vapor-rich and liquid-rich two–phase primary fluid inclusions indicates the deposition of columnar adularia from boiling fluids. The precipitation temperatures range from 175 to 215C, and generally increase with depth. The temperatures of final melting point of ice range from –1.2 to –0.1C with an average of –0.5C, corresponding to salinity ranging from 0.2 to 2.1 wt% NaCl equivalent with an average of 0.9 wt% NaCl (eq.). Concentrations of non-condensable gases such as CO₂ were under the detection limit of a laser Raman microprobe spectrometer. From the precipitation temperature of columnar adularia in the Hosen–2 vein and the boiling point – depth curve for a 0.9 wt% NaCl (eq.) fluid, paleo-water table was estimated to be at an elevation of about +170 m. The elevation of the paleo-water tables for other veins was estimated to range from +140 to +215 m.     

Gas Measurement of Fluid Inclusions from the Hishikari Epithermal Gold Deposit, Southern Kyushu, Japan, Using Laser Raman Microprobe

Abstract. Laser Raman microprobe analysis was performed on the fluid inclusions from the Honko-Sanjin zone in the Hishikari epithermal gold deposit, southern Kyushu, Japan. Gas concentrations of fluid inclusions through the zone were below detection limits (e.g., 5 mmole/kg H₂O for CO₂), with an exception at shallow portion in which the CO₂/N₂ mole ratio was determined to be 5.3. Boiling of hydrothermal solutions probably separated gases from ore fluids at the deep portion of the deposit, and migration of gases to shallow portion resulted in CO₂-rich steam-heated water and related acid alteration.     

Characteristic Features of REE and Pb–Zn–Ag Mineralizations in the Na Son Deposit,Northeastern Vietnam

The Na Son deposit is a small‐scale Pb–ZnPb–Zn–Ag deposit in northeast Vietnam and consists of biotite–chlorite schist, reddish altered rocks, quartz veins and syenite. The biotite–chlorite schist is intruded by syenite. Reddish altered rocks occur as an alteration halo between the biotite–allanite‐bearing quartz veins and the biotite–chlorite schist. Allanite occurs in the biotite–allanite‐bearing quartz veins and in the proximal reddish altered rocks. Rare earth element (REE) fluorocarbonate minerals occur along fractures or at rim of allanite crystals. The later horizontal aggregates of sulfide veins and veinlets cut the earlier reddish altered rocks. The earlier Pb–Zn veins consist of a large amount of galena and lesser amounts of sphalerite, pyrite and molybdenite. The later Cu veins cutting the Pb–Zn veins include chalcopyrite and lesser amounts of tetrahedrite and pyrite. The occurrences of two‐phase H₂O–CO₂ fluid inclusions in quartz from biotite–allanite‐bearing quartz veins and REE‐bearing fluorocarbonate minerals in allanite suggest the presence of CO₂ and F in the hydrothermal fluid. The oxygen isotopic ratios of the reddish altered rocks, biotite–chlorite schist, and syenite range from +13.9 to +14.9 ‰, +11.5 to +13.3 ‰, and +10.1 to +11.6 ‰, respectively. Assuming an isotopic equilibrium between quartz (+14.6 to +15.8 ‰) and biotite (+8.6 ‰) in the biotite–allanite‐bearing quartz vein, formation temperature was estimated to be 400°C. At 400°C, δ¹⁸O values of the hydrothermal fluid in equilibrium with quartz and biotite range from +10.5 to +11.7 ‰. These δ¹⁸O values are consistent with fluid that is derived from metamorphism. Assuming an isotopic equilibrium between galena (+1.5 to +1.7 ‰) and chalcopyrite (+3.4 ‰), the formation temperature was estimated to be approximately 300°C. The formation temperature of the Na Son deposit decreased with the progress of mineralization. Based on the geological data, occurrence of REE‐bearing minerals and oxygen isotopic ratios, the REE mineralization is thought to result from interaction between biotite–chlorite schist and REE‐, CO₂‐ and F‐bearing metamorphic fluid at 400°C under a rock‐dominant condition.     

Petrological and Geochemical Characteristics of Intrusive Rocks Related to Porphyry Copper Mineralization and the Implications for the Genesis of Deposits in the Namosi area, Viti Levu, Republic of the Fiji Islands

In the Namosi district, of Viti Levu Island, Republic of the Fiji Islands, we conducted chemical analysis on intrusive rocks and attempted to clarify the relationship between petrological characteristics and mineralization. Samples were collected from the Waisoi copper deposit, Waivaka corridor, Waisomo, Wailutelevu and Wainabama Southwest localities. The intrusive rocks in the district show the overall characteristics of calc-alkaline magnetite series. Using the normative composition diagram for granite classification, most of the intrusive rocks plot in the tonalite, granodiorite, quartz monzodiorite and quartz diorite fields. Rare earth element (REE) analysis revealed that at Waisoi the intrusive rocks tend towards an Eu positive anomaly, whereas most of those at Waisomo tend to have a negative anomaly. The (Ce_cn/Yb_cn)/Yb_cn ratio shows that the intrusive rocks in the Namosi district may be derived from a mantle origin magma possibly contaminated by crustal materials. Waisoi rocks have less contamination with continental crust and show higher gold content compared to those of the Waivaka corridor. The observed differences between Waisoi and Waivaka corridor in the Cu/Au ratio might also be caused by varying amounts of contamination by crustal materials. There is no clear correlation between the La/Yb ratio and K–Ar ages, however, the La/Yb ratio of the Waivaka corridor rocks has a wide range, suggesting a variable amount of crustal contamination of the magma from 7 to 5 Ma. The less crustal contamination and generation of relatively high silica contents under relatively oxidized conditions in the Waisoi magmas is correlated with Au-rich porphyry copper mineralization and in contrast more crustal contamination produced Au-poor porphyry copper mineralization at the Waivaka Corridor in the Namosi district.