A new numerical approach to the hyperstatic reaction method for segmental tunnel linings

This paper proposes a numerical approach to the hyperstatic reaction method (HRM) for the analysis of segmental tunnel linings. The influence of segmental joints has been considered directly using a fixity ratio that is determined on the basis of the rotational stiffness. The parameters necessary for the calculation are presented. A specific implementation has been developed using a FEM framework. This code is able to consider the three‐dimensional (3D) effect of segment joints in successive rings on the tunnel lining behaviour. The present HRM allows one to take an arbitrary distribution of segment joints along the tunnel boundary into consideration. In addition, the rotational stiffness of segment joints has been simulated using nonlinear behaviour, as it is closer to the true behaviour of a joint than linear or bilinear behaviour. The numerical results of three hypotheses on ring interaction, which allow the 3D effect of a segmental tunnel lining to be taken into account, have been compared with data obtained from the shield‐driven tunnel of the Bologna–Florence high‐speed railway line project. The numerical results presented in the paper show that the proposed HRM can be used to effectively estimate the behaviour of a segmental tunnel lining. Copyright © 2014 John Wiley & Sons, Ltd.     

Geotechnical design parameter evaluation using the alluvial plain characteristics in southeastern Iraq

Geotechnical construction is responsible for the overall stability of superstructures, and if there are design errors, the structure will be exposed to potential problems. Geotechnical design starts with the correct interpretation of the target ground. Southeastern Iraq is mainly comprised of an alluvial plain with diverse geological features, and, therefore, geotechnical design requires a detailed interpretation and understanding of the area. This paper reports on laboratory and field tests and in-depth analyses conducted on these alluvial plains. The results reveal that the upper layer of this area is highly over-consolidated. This may have been caused by the removal of overburden pressure as a result of glaciation and desiccation. The highly over-consolidated soils caused considerable sample disturbance by swelling the bored sample; this provided less reliable results. However, the cone penetration test was regarded as the most appropriate field assessment method for deriving sensible geotechnical design parameters. Despite its limitations in clayey soils, the standard penetration test provided results that matched well with previous observations due to the high penetration resistance of the highly over-consolidated ground. Down-hole tests and plate load tests were considered less reliable methods due to their limited applicability in this area. This study considers geographical features, laboratory methods, and empirical correlations from in situ tests, and, therefore, provides a well-summarized guideline to evaluate special geotechnical characteristics of the alluvial plain in southeastern Iraq.     

ALMA observations of the circumstellar envelope around EP Aqr

Atacama Large Millimetre/sub-millimetre Array(ALMA) observations of CO(1–0) and CO(2–1) emissions from the circumstellar envelope of the asymptotic giant branch(AGB) star EP Aqr have been made with four times better spatial resolution than previously available. They are analysed with emphasis on the de-projection in space of the effective emissivity and flux of matter using as input a prescribed configuration of the velocity field, assumed to be radial. The data are found to display an intrinsic axisymmetry with respect to an axis making a small angle with respect to the line of sight. A broad range of wind configurations, from prolate(bipolar) to oblate(equatorial) has been studied and found to be accompanied by significant equatorial emission. Qualitatively, the effective emissivity is enhanced near the equator to produce the central narrow component observed in the Doppler velocity spectra and its dependence on star latitude generally follows that of the wind velocity with the exception of an omni-present depression near the poles. In particular, large equatorial expansion velocities produce a flared disc or a ring of effective emissivity and mass loss. The effect on the determination of the orientation of the star axis of radial velocity gradients, and possibly competing rotation and expansion in the equatorial disc, is discussed. In general,the flux of matter is found to reach a broad maximum at distances of the order of 500 AU from the star.Arguments are given that may be used to favour one wind velocity distribution over another. As a result of the improved quality of the data, a deeper understanding of the constraints imposed on morphology and kinematics has been obtained.     

An analysis of coastal erosion in the tropical rapid accretion delta of the Red River, Vietnam

The largest plain in the North Vietnam has formed by the redundant sediment of the Red River system. Sediment supply is not equally distributed, causing erosion in some places. The paper analyzes the evolvement and physical mechanism of the erosion. The overlay of five recent topographical maps (1930, 1965, 1985, 1995, and 2001) shows that sediment redundantly deposits at some big river mouths (Ba Lat, Lach, and Day), leading to rapid accretion (up to 100 m/y). Typical mechanism of delta propagation is forming and connecting sand bars in front of the mouths. Erosion coasts are distributed either between the river mouths (Hai Hau) or nearby them (Giao Long, Giao Phong, and Nghia Phuc). The evolvement of erosion is caused by wave-induced longshore southwestward sediment transport. Meanwhile sediment from the river mouths is not directed to deposit nearshore. The development of sand bars can intensively reduce the erosion rate nearby river mouths. Erosion in Hai Hau is accelerated by sea level rise and upstream dams. Sea dike stability is seriously threatened by erosion-induced lowering of beach profiles, sea level rise, typhoon, and storm surge.     

Effects of pulsed nutrient inputs on phytoplankton assemblage structure and blooms in an enclosed coastal area

The response of phytoplankton assemblage structure to terrestrial nutrient inputs was examined for the Gulf of Kalloni in the Northern Aegean Sea, a productive semi-enclosed coastal marine ecosystem. The study was focused on a typical annual cycle, and emphasis was placed on the comparative analysis between blooms developing after significant nutrient inputs from the watershed, and naturally occurring blooms. Baseline information was collected on a monthly basis from a network of stations located in the oligotrophic open sea and the interior and more productive part of the embayment. Intensive sampling was also carried out along a gradient in the vicinity of a river which was the most important source of freshwater and nutrient input for the Gulf. Phytoplankton assemblage structure was analyzed from 188 samples using diversity indices (Shannon and Average Taxonomic Distinctness), multivariate plotting methods (NMDS), multivariate statistics (PERMANOVA), and canonical correspondence analysis (CCA). Three characteristic assemblages were recognized: (1) an autumn assemblage developed under nutrient depleted conditions, having low diversity due to the dominance of two small diatoms, (2) a winter bloom of the potentially toxic species Pseudo-nitzschia calliantha occurring immediately after a nutrient peak and characterized by very low diversity, and (3) a naturally occurring early summer bloom of centric diatoms with relatively high diversity. The results of the study support the view that moderate nutrient inputs may have a beneficial effect on the functioning of coastal ecosystems, stimulating the taxonomic diversity through the growth of different taxonomic groups and taxa. On the other hand, a sudden pulse of high nutrient concentrations may greatly affect the natural succession of organisms, have a negative effect on the diversity through the dominance of a single species, and can increase the possibility of a harmful algal bloom development.     

An improved earthquake catalogue (<Emphasis Type="Italic">M</Emphasis> ≥ 4.0) for Turkey and its near vicinity (1900–2012)

Many catalogues, agency reports and research articles have been published on seismicity of Turkey and its surrounding since 1950s. Given existing magnitude heterogeneity, erroneous information on epicentral location, event date and time, this past published data however is far from fulfilling the required standards. Paucity of a standardized format in the available catalogues have reinforced the need for a refined and updated catalogue for earthquake related hazard and risk studies. During this study, ~37,000 earthquakes and related parametric data were evaluated by utilizing more than 41 published studies and, an integrated database was prepared in order to analyse all parameters acquired from the catalogues and references for each event. Within the scope of this study, the epicentral locations of M ≥ 5.0 events were firstly reappraised based on the updated Active Fault Map of Turkey. An improved catalogue of 12.674 events for the period 1900–2012 was as a result recompiled for the region between 32–45N° and 23–48E° by analyzing in detail accuracy of all seismological parameters available for each event. The events consist of M ≥ 4.0 are reported in several magnitude scales (e.g. moment magnitude, M_w; surface wave magnitude, M_S; body-wave magnitude m_b; local magnitude M_L and duration magnitude M_d) whereas the maximum focal depth reaches up to 225-km. In order to provide homogenous data, the improved catalogue is unified in terms of M_w. Fore-and aftershocks were also removed from the catalogue and completeness analyses were performed both separately for various tectonic sources and as a whole for the study region of interest. Thus, the prepared homogenous and declustered catalogue consisting of 6573 events provides the basis for a reliable input to the seismic hazard assessment studies for Turkey and its surrounding areas.     

Investigating Correlations and Variations of Air Pollutant Concentrations under Conditions of Rapid Industrialization – Kocaeli (1987–2009)

In this study, it was aimed to characterize temporal variations of air pollutants for determining contribution to pollution episodes and to obtain correlations between these pollutants. With this aim we used data analysis for measured sulfur dioxide (SO₂), particulate matter (PM, black fume and PM10), nitrogen oxides (NO_x), ozone (O₃), carbon monoxide (CO), methane (CH₄), and non‐methane hydrocarbons (NMHC) recorded in Kocaeli, one of the most industrilizated cities of Turkey. Pollutant concentrations were the results of continuous and semi‐automatic measurements. Semi‐automatic measurements of SO₂ and PM (black fume) were enclosing period from 1987 to 2008 whereas continuous monitoring of all pollutants included years of 2007–2009. In the first stage of the study daily, monthly, annual, and seasonal variations of pollution were researched. Annual average concentrations were compared with limits set by Air Quality Protection Regulation (AQPR), Air Quality Evaluation and Management Regulation (AQEMR), World Health Organization (WHO), European Union (EU), and National Ambient Air Quality Standards (USEPA). In the following stage relationships between pollutants such as NO₂–O₃, NO_x–CO, NO_x–NMHC, and NO_x–SO₂ were investigated and correlation coefficients were determined as 0.87, 0.56, 0.51, and 0.69, respectively. R² values of regression models developed from these correlations were 0.78, 0.56, 0.34, and 0.72, respectively. Vehicle density of the traffic was evaluated with NO_x–O₃ emissions and decrease was seen in NO_x emissions due to decreasing vehicle density at weekends whereas O₃ concentrations increased. These correlations enable prediction of the parameters that cannot be measured which is important for providing improvement in early warning systems.     

Hydrogeophysical modelling of Hisarcik (Kütahya) geothermal field,western Turkey

Western Anatolia hosts many low-to-moderate and high-temperature geothermal sources in which active faults play a dominant role to control the recharge and the discharge of geothermal fluid. In this study, we used the two-dimensional geoelectric structure of Kütahya Hisarcık geothermal field, and created a conceptual hydrogeophysical model that includes faults, real topographical variations and geological units. The temperature distribution and fluid flow pattern are also investigated. The depth extension of Hisarcık Fault, electrical basement and low resistivity anomalies related to the presence of geothermal fluid are determined by using resistivity studies in the area. Numerical simulations suggest that Hisarcık fault functioning as a fluid conduit primarily enables hot fluid to be transported from depth to the surface. It is shown that the locations of predicted outflow vents coincide with those of hot springs in the area.