Nanoseismic monitoring of gravity-induced slope instabilities for the risk management of an aqueduct infrastructure in Central Apennines (Italy)

A monitoring system is operative in the Peschiera Springs slope (Central Apennines, Italy) to mitigate the landslide risk related to the hosted main drainage plant of Rome aqueducts by providing alert warning. Such a strategy allows to avoid out-of-service episodes so reducing extra-costs of water distribution management. The Peschiera Springs slope is involved in a rock mass creep characterized by an average steady strain rate of 1 mm year⁻¹ and responsible for several landforms including sinkholes, subvertical scarps and trenches. Moreover, an average aquifer discharge of 19 m³ s⁻¹ causes an intense limestone dissolution concentrated in correspondence with release bands and discontinuities that dislodge the jointed rock mass. Since 2008, an accelerometric network has been operating within the slope; about 1300 microseismic local events were recorded up to now, distinguished in failures and collapses. A control index, based on frequency of occurrence and cumulative energy of the recorded microseismic events was defined to provide three levels of alert. In 2013, a temporary nanoseismic Seismic Navigation System (SNS) array was installed inside a tunnel of the drainage plant to integrate the pre-existent seismic monitoring system. This array allowed to record 37 microseismic events, which locations are in good agreement with the evolutionary geological model of the ongoing gravitational slope deformation. In 2014, a permanent nanoseismic SNS array was installed in the plant and allowed to record several sequences of underground collapses including more than 500 events. The nanoseismic monitoring system is allowing to: (1) increase the detection level of the monitoring system; (2) locate hypocentres of the events; and (3) detect precursors of the strongest events.

     

Microseismicity within a karstified rock mass due to cracks and collapses as a tool for risk management

Seismometer arrays have been widely applied to record collapse by controlled explosion in mines and caves. However, most underground failures are natural events, and because they can occur abruptly, underground failures represent a serious geological hazard. An accelerometric array installed on 4 September 2008 has been used to manage the geological risk of the Peschiera Springs drainage plant of Rome??s aqueduct, which is located in the Central Apennines approximately 80?km from Rome, Italy. The plant occupies a karstified carbonatic slope that is extensively involved in gravitational deformations, which are responsible for underground failures such as cracks and collapses. To distinguish among different types of recorded events, an automated procedure was implemented based on the duration, peak of ground acceleration (PGA) and PGA variation in the recordings of the plant??s accelerometric stations. The frequencies of earthquakes and micro-earthquakes due to underground failures are, in general, well correlated. Nevertheless, many underground failure sequences can be directly associated with the continuous deformations that affect the slope. The cumulative Arias intensity trend derived for the underground failures combined with the failure and earthquake frequencies enabled the definition of a control index (CI) that identifies alarming or emergency conditions. The CI can be used as a tool for managing the geological risk associated with the deformational processes that affect the drainage plant.     

Nanoseismic monitoring of gravity-induced slope instabilities for the risk management of an aqueduct infrastructure in Central Apennines (Italy)

A monitoring system is operative in the Peschiera Springs slope (Central Apennines, Italy) to mitigate the landslide risk related to the hosted main drainage plant of Rome aqueducts by providing alert warning. Such a strategy allows to avoid out-of-service episodes so reducing extra-costs of water distribution management. The Peschiera Springs slope is involved in a rock mass creep characterized by an average steady strain rate of 1 mm year^?1 and responsible for several landforms including sinkholes, subvertical scarps and trenches. Moreover, an average aquifer discharge of 19 m³ s^?1 causes an intense limestone dissolution concentrated in correspondence with release bands and discontinuities that dislodge the jointed rock mass. Since 2008, an accelerometric network has been operating within the slope; about 1300 microseismic local events were recorded up to now, distinguished in failures and collapses. A control index, based on frequency of occurrence and cumulative energy of the recorded microseismic events was defined to provide three levels of alert. In 2013, a temporary nanoseismic Seismic Navigation System (SNS) array was installed inside a tunnel of the drainage plant to integrate the pre-existent seismic monitoring system. This array allowed to record 37 microseismic events, which locations are in good agreement with the evolutionary geological model of the ongoing gravitational slope deformation. In 2014, a permanent nanoseismic SNS array was installed in the plant and allowed to record several sequences of underground collapses including more than 500 events. The nanoseismic monitoring system is allowing to: (1) increase the detection level of the monitoring system; (2) locate hypocentres of the events; and (3) detect precursors of the strongest events.     

Italian accelerometric archive: geological, geophysical and geotechnical investigations at strong-motion stations

Geological, geophysical and geotechnical investigations, for the characterization of the strong-motion recording sites managed by the Italian Civil Protection, have been carried out in the framework of the project “Italian strong-motion database in the period 1972–2004”. The project aimed at creating an updated database of strong-motion data acquired in Italy by different institutions in the time span 1972–2004, and at improving the quality of disseminated data. This article illustrates the state of the recording site characterization before the beginning of the project, explains the criteria adopted to select the sites where geophysical/geotechnical investigation have been performed and describes the results of the promoted field surveys.